Share your VPN Experience
Cisco has made changes for the Security exams by replacing the old CCSP with the new CCNP Security Certification with 4 modules: Secure, Firewall, IPS and VPN. In fact, the old CCSP and the new CCNP Security are very similar. Many candidates have requested us to put up materials for these new exams but it is a time-consuming work. In the mean time, we created the “Share your experience” for the VPN exam. We really hope anyone who read securitytut, 9tut, digitaltut, certprepare, networktut and voicetut contribute to these sections as your experience is invaluable for CCNP Security learners to complete their goals.
Please share with us your experience after taking the VPN 642-647 exam, your materials, the way you learned, your recommendations…
In the Diffie-Hellman protocol, which type of key is the shared secret?
A. a symmetric key
B. an asymmetric key
C. a decryption key
D. an encryption key
Someone know?
@Octopus I think A is correct.
Google knows it!
Is Diffie Hellman a symmetric algorithm?
Diffie Hellman uses a private-public key pair to establish a shared secret, typically a symmetric key. DH is not a symmetric algorithm – it is an asymmetric algorithm used to establish a shared secret for a symmetric key algorithm.
https://doubleoctopus.com/security-wiki/encryption-and-cryptography/diffie-hellman-algorithm/
Let’s help each other, but let’s look a little to make it easier for everyone to study.
I have done my test!.
Lab:
1. Clienless SSL VPN – BOOKMARKS (HQ-Server is for http, DMZ-Server-FTP is for ftp)
Simlet:
1. ASDM
D&D:
1. Encryption/Authentication
2. DMVPN phase/process (followed supermario’s answer)
3. VPN States.
Copy link and paste in your browser
lop.by/L5V
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
An Engineer must configure GETVPN to transfer over the network between corporate offices. which two options are the advantages to choose GETVPN over EZVPN? (TWO)
A. GETVPN is highly scalable any to any mesh topology
B. GETVPN has QoS support
C. GETVPN has unique session keys for improved security
D. GETVPN supports multicast
E. GET VPN supports a hub-and -spoke topology
Another problematic question, who know ?
About previous question GETVPN over EZVPN. Supermario dumps says the are correct A,C but I think it’s wrong.
A candidate from thailand has passed 300-210 exam yesterday. She got 94x Marks.
Please find review under below URL. Remove spaces
(300-206 and 300-209 Reviews)
https: // drive.google.com/drive/folders/1ZEwzqwWXwz2z7w70b9u2564y9g5b7qD2?usp=sharing
(300-210 Reviews)
https: // drive.google.com/drive/folders/1wQj_aHRQXg1Ifm3ExMn_L5AXUr9dw0wv?usp=sharing
If anyone is interested I can share SPOTO dumps only for 50$
My whatssapp +92-346-5363766
I think this is correct
Drag and Drop Question
Gre over IPsec = Can use dyn routing / Designed to be stateless
Ipsec VTI = Higher MTU / Unicast+multicast
Good video of step-by-step configuration of DMVPN phase 1, phase 2 and phase 3
https://www.youtube.com/watch?v=7yJcVFn2HWw
QUESTION 385
What is the name of the transform set being used on the ISR?
A. Default
B. ESP-AESESP-SHA-HMAC
C. SP-AES-256-MD5-TRANS
D. TSET
@R82 Whats your input on this?
@Demus, I hope I can help you
A. Default
B. ESP-AES ESP-SHA-HMAC
C. SP-AES-256-MD5-TRANS
D. TSET
If the question is:
What is the name of the transform set being used on the ISR?
then the correct answer is D (TSET)
but if the question is;
Which transform set is being used on the branch ISR?
then the correct answer is B (ESP-AES ESP-SHA-HMAC)
Router1#sh crypto ipsec transform-set
Transform set TSET: { esp-3des esp-sha-hmac }
will negotiate = { Tunnel, },
don’t pay attention to the last comment
@Demus, I hope I can help you
I have joined two dump questions to explain both.
A. Default
B. ESP-3DES ESP-SHA-HMAC
C. SP-AES-256-MD5-TRANS
D. TSET
If the question is:
What is the name of the transform set being used on the ISR?
then the correct answer is D (TSET)
but if the question is;
Which transform set is being used on the branch ISR?
then the correct answer is B (ESP-3DES ESP-SHA-HMAC)
Router1#sh crypto ipsec transform-set
Transform set TSET: { esp-3des esp-sha-hmac }
will negotiate = { Tunnel, },
Has anyone recently passed the exam 300-209? or does it show up soon?
An engineer is configuring clientless SSL VPN. The finance department has a database server that only they should access, but the sales department can currently access it. The finance and the sales departments are configured as separate group-policies. Which option must be added to the configuration to make sure the users in the sales department cannot access the finance department server?
A. Web type ACL
B. Port forwarding
C. Tunnel group lock
D. VPN filter ACL
Correct Answer: A
I think correct answer is C.
what do you think?
Hi guys
Could you please share valid dumps for ccnp security all modules
Hi all
could you please share a vce player ?
Thaks
@R82
Thanks for your explanation. You are very right.
have Passed 300-209 today with 9xx. Super Mario Dump is still valid. all questions 98% of the questions were from Super Mario.
some one or two questions
1. two command use for debug ASA IKEv2
A. debug crypto ikev2 platform
B. debug crypto ikev2 protocol
Correct answer:AB
2. which algoritm must be used that superposition from attack
A. aes-192
B. sha-384
C. rsa-3072
D. ecdsa -384
Correct answer: D
3. which two types of servers can be used as distribution point for crls
A. http
B. subordinate ca
C. ldap
D. scp
I think AC
@Demus Congratulations!
What lab, SIMLET and D&D did you get?
How many questions did you have?
@R82
Lab:
1. Clienless SSL VPN – BOOKMARKS (HQ-Server is for http, DMZ-Server-FTP is for ftp)
Simlet:
2. ASDM (VPN command – show crypto isakmp key, show crypto ipsec sa and show crypto isakmp sa)
DMVPN process(I used the below as answers)
– The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
– The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
– The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
– The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
– The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
– The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
ESP-SHA-HMAC -> Authentication
ESP-MD5 -> Authentication
ESP-AES-HMAC -> Encryption
ESP-3DES -> Encryption
#pkts encaps: 110,#pkt decaps
QM_IDLE
atts not acceptable
retransmitting phase 1 MM_NO_STATE
sanity checks failed
Packet needs to be fragmented but DF set
not sure of the last DnD but this was how i arrange it
@Demus, Ok thanks!
Have you finished the certification or do you have any exams to pass?
An engineer is configuring clientless VPN. The finance department has a database server that only they
should access but the sales department can currently access it. The finance and the sales department are
configured as separate group-policies. Which option must be added to the configuration to make sure the
users in the sales department cannot access the finance department server?
A. tunnel group lock
B. port forwarding
C. VPN filter ACL
D. webtype ACL
Correct Answer: D
I think that correct answer is A, What do you think?
A customer requires all traffic to go through a VPN. However, access to the local network is also required.
Which two options can enable this configuration? (Choose two.)
A. split exclude
B. use of an XML profile
C. full tunnel by default
D. split tunnel
E. split include
Someone know what is correct answer ?
Hola!
The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 501
……
P.S.
PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(501q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(523q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(459q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hello Guys,
I am configuring Supermario VCE file with windows 10. unfortunately VCE file is not opening.
how to open VCE file of supermario ?
can any one resolve it please.
@R82
Am left with 300-208 to finish.
correct Answer is D. webtype ACL.
@octopus, i will go for D. split tunnel
A network engineer must configure a now VPN tunnel Utilizing IKEv2 For with three reasons would a configuration use IKEv2 instead d KEv1? (Choose three.)
A. increased hash size
B. DOS protection
C. Preshared keys are used for authentication
D. RSA-Sig used for authentication
E. native NAT traversal
F. asymmetric authentication
@Demus –> I approved 300-208 in 2017, after 300-209, I would stay 300-210
Do you have a valid dump from 300-210?
@Octopus, The correct answer is BEF
@R82 does ikev2 has increased hash size than ikev1 ?
Which option is the main difference between GET VPN and DMVPN?
A. AES encryption support
B. dynamic spoke-to-spoke tunnel communications
C. Next Hop Resolution Protocol
D. Group Domain of Interpretation protocol
Supermarioquestion dumps says B is correct.
But I think C or D
@R82
I have a valid dump for 300-209. very solid and relaible
@Demus
pls share.
fidolysis @ g m a il .com
Thanks man!
VCETrainer.com
A great website to open and use VCE files. $10 per file for as long as you need it. A hell of a lot cheaper than paying Avasent their ridiculous fees for the VCE player.
@Octopus
A customer requires all traffic to go through a VPN. However, access to the local network is also required.
Which two options can enable this configuration? (Choose two.)
A. split exclude
B. use of an XML profile
C. full tunnel by default
D. split tunnel
E. split include
Answer A & B
Which two statements are true when designing a SSL VPN solution using Cisco AnyConnect (Choose two.)
A. The VPN server must have a self-signed certificate.
B. A SSL group pre-shared key must be configured on the server.
C. Server side certificate is optional if using AAA for client authentication.
D. The VPN IP address pool can overlap with the rest of the LAN networks.
E. DTLS can be enabled for better performance.
Correct Answer: DE
I think that the correct answer is AE
Which two options are benefits of IKEv2 over IKEv1? (choose two)
A. IKEv2 supports NAT traversal whereas IKEv1 cannot
B. IKEv2 supports EAP for remote access connections
C. IKEv2 supports sending identifiers in clear text
D. IKEv2 supports stronger encryption ciphers than IKEv1
E. IKEv2 supports public key encryption whereas IKEv1 does not
Correct Answer: BC
For my opinion B,D
I have been seeing posts about supermario questions. Where can I find them?
Witch option is an advantage of using elliptic curve cryptography?
A. Efficiency of operation
B. Ease of implementation
C. symmetrical key exchange
D. resistance to quantum attacks.
@S23
A is the correct answer
I have Passed 300-209 today with 9xx. Mario dump is valid, but there are many wrong questions, it is necessary to review
I move to 300-210
No new questions from those commented on the forum
Lab:
1. Clienless SSL VPN – BOOKMARKS (HQ-Server is for http, DMZ-Server-FTP is for ftp)
Simlet:
1. ASDM (VPN command – show crypto isakmp key, show crypto ipsec sa and show crypto isakmp sa)
D&D:
1. Encryption/Authentication
2. DMVPN phase/process (followed supermario’s answer)
3. VPN States
Hi Guys,
I have the SuperMario´s dumps v4 (448 questions), are they still valid?
Thanks in advance.
@R82 Congratulations !
So you didn’t have new questions on the test.
All questions of the supermario dumps ?
You answered all D&D with the help of supermario
@Octopus
DMVPN process execution
– The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
– The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
– The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
– The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
– The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
– The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
All questions of the supermario dumps ? Yes, plus the last questions shared in this forum.
Which two options are benefits of IKEv2 over IKEv1? (choose two)
A. IKEv2 supports NAT traversal whereas IKEv1 cannot
B. IKEv2 supports EAP for remote access connections
C. IKEv2 supports sending identifiers in clear text
D. IKEv2 supports stronger encryption ciphers than IKEv1
E. IKEv2 supports public key encryption whereas IKEv1 does not
Correct: AB
https:*//www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-2mt/sec-cfg-ikev2-flex.html#GUID-6548042E-1E4C-416A-8347-00DCF96F04DF
Witch option is an advantage of using elliptic curve cryptography?
A. Efficiency of operation
B. Ease of implementation
C. symmetrical key exchange
D. resistance to quantum attacks.
Answer: A
A customer requires all traffic to go through a VPN. However, access to the local network is also required. Which two options can enable this configuration? (Choose two.)
A. split exclude
B. use of an XML profile
C. full tunnel by default
D. split tunnel
E. split include
Answer: AB
passed today 99x – supermario4 – 100% valid
SuperMario Question 341
show crypto ikev1 sa
Role: initiator
State: MM_ACTIVE
A. The Diffie-Hellman groups configured are different
B. The pre shared key does not match.
C. Phase 1 is not completed and troubleshooting is required.
D. The issue occurs in phase 2 of the tunnel.
The correct answer should be: C (it is said that it is D)
https :// www. tunnelsup. com/ isakmp-ike-phase-1-status-messages/
After the completion of IKE Phase 1, the state should be MM_IDLE.
Right?
300-209 congrats.
Where do I buy supermario4?
Sorry for the previous, D is correct.
AM_ACTIVE or MM_ACTIVE means IKE Phase 1 completed.
QM_IDLE is state for SA.
Download from the previous pages
@BlackBox – Download from the previous pages
That comment was for me? I have been checking previous pages with no success.
Would like to ask if you or someone else had experience with preway? Is it worth it to buy?
@Demus
how we can have your 300-209 Dump ?
Thanks
Hi @R82
may you please kindly share 300-210 dump if you have it. boyzretonaz at gmail dot com
Refer to the exhibit. An engineer has configured two new VPN tunnels to 172.18.1.1 and 172.19.1.1. However, communication between 10.1.0.10 and 10.1.11.10 does not function.
What is the reason?
(there was a output configuration but I can’t enclosed it in the forum?)
A. NAT-T is disabled
B. The remote peer 172.17.1.1 doesn’t support AES256
C. overlapping crypto ACL
D. invalid route
Dumps says C
Your proposal ?
@R82 I think that’s the right order
DMVPN process :
1. The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
2.The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
3.The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
4.The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
5. The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
6.The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
I passed today with 9xx
the supermario dump is 98% valid
I had 1 LAB & 1 Simlet
SSL VPN Lab
Site-to-Site Simlet
3 D&D -> DMVPN phases, Encryption/Hashing, IKEv1 states
2 Lab errors, SSL VPN -> Bookmarks aren’t applied, Transforset in show, not included in options
Here is the valid dump
https : // http://www.scribd.com/document/433272965/300-209-by-Supermario-v4
Good luck
@MJG congrats
You put DMVPN in that order ?
DMVPN process :
1. The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
2.The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
3.The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
4.The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
5. The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
6.The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
@Lomba
Yes, Thats correct
@MJG
Simlet “Site-to-Site” – it means should be used: show crypto isakmp key, show crypto ipsec sa, show crypto ipsec sa ?
D&D “IKEv1 states” – sanity, atts not accept, pase 1 MM, ptkseccap:110, Qm_IDLe, packet need fragent ?
Lab has changed or remained unchanged?
Thanks
is this lab exist in Mario Dump
Lab:
1. Clienless SSL VPN – BOOKMARKS (HQ-Server is for http, DMZ-Server-FTP is for ftp)
Passed – 96x
@Lomba I put 3, 4, 5, 6, 1, 2
There is the last part of 1. that said: “sent across the GRE over IPSec tunnel” and if there is no tunnel how to send it over it…
And I read somewhere that NHRP is checking if the tunnel established….
Regarding the lab/sim question What is the name of transportset on branch ISR…
1. show crypto ipsec sa (to see enc, int)
2. show crypto ipsec transformset (to see tha name of transportset for that enc, int)
Hi all
No, nothing is changed, I just faced a bug in the Site-to-Site simlet,
the show command says current transformset is “EPS-3DES ESP-SHA-HMAC” while the options say “Defauly, TSET, “EPS-AES ESP-SHA-HMAC, something else”.
I wrote a comment to clarify the issue
else than that, super mario is good
@Lomba: You are right, correct order is the one you described…check the below cisco doc for verification
https*://www.cisco.com/c/en/us/support/docs/security-vpn/dynamic-multi-point-vpn-dmvpn/116957-technote-dmvpn-00.html#anc12
@Blackbox
1. When the Tunnel on the Spoke is “no shutdown” it generates a NHRP Registration Request, which starts the DMVPN process. As the Hub’s configuration is completely dynamic, the Spoke must be the endpoint which initiates the connection.
2. The NHRP Registration Request is then encapsulated in GRE which triggers the crypto process to start.
3. At this point, the first ISAKMP Main Mode message – ISAKMP MM1 – is sent from the Spoke to the Hub on port UDP500.
4. The Hub receives and processes MM1 and responds with ISAKMP MM2, as it has a matching ISAKMP policy.
5. Once the Spoke receives the MM2, it responds with MM3. As with MM1, the Spoke confirms the received ISAKMP policy is valid.
6. The Hub receives MM3 and responds with MM4.
7. At this point in the ISAKMP negotiation, the Spoke might respond on port UDP4500 if NAT is detected in the transit path. However, if no NAT is detected the Spoke continues and sends MM5 on UDP500. Lastly, the Hub responds with MM6 in order to complete the Main Mode exchange.
8. Once the Spoke receives MM6 from the Hub, it sends QM1 to the Hub on UDP500 in order to begin Quick Mode.
9. The Hub receives QM1 and responds with QM2, as all received attributes are accepted. At this point the Hub creates the Phase 2 SAs for this session.
10. As the last step of the Quick Mode negotiation, QM2 is received by the Spoke. The Spoke then creates its Phase 2 SAs and sends QM3 in response. This completes the ISAKMP and IPSec negotiation. There is now an IPSec session which encrypts GRE traffic between these two peers.
11. Now that the crypto session is up and able to pass traffic, these packets are encapsulated within the GRE over IPSec tunnel
@MJG thanks for replay.
One more question.
Are all the D&D questions that were on the exam in supermario ?
@300-209 @Anonymous
Good link, nice explanation… just look a little further. Steps 12 and 13 are no. 1 and 2 form @Lomba question.
How to “send over GRE over IPsec tunnel” if not established? – No 1
And ” sents NHRP registration reply after it confirms that the spoke has a valid tunnel ” – No 2
At the begginig there is GENERATES (step 1) and ENCAPSULATED (step 2) witch triggers the creation of the tunnel. It is not sent.
That is my opinion, not telling that it is correct.
ATTENTION PLEASE!
The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 501
……
P.S.
PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(501q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
By the way:
1. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(521q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(459q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Hi,
Anyone know if all three D&D questions that are on the exam can be found in the supermario dumps ??
@Lomba Supermario is really enough to pass…
I didn’t have any new D&D
Hello everybody,
passed today with 890/1000
weird thing was that my test was only 57 questions
Very low score but I was not very well prepared and sleep-deprived which messed up with my ability to think clear!
Supermario PDF + the 7 new questions that @free posted on 24 december is all you need.
Don’t start asking me to send you the pdf or the 7 new questions because both CAN BE FOUND IN THIS FORUM IF YOU SEARCH A LITTLE BIT (pages 40-43)
Please be informed that Supermario PDF has a lot of answer wrong so the best for you would be to verify all the answers on your own with official documentation to be sure
SSL VPN BOOKMARK
VERIFY IPSEC (transform set,preshare etc)
DMVPN DND
AUTH/ENCR DND
PCAPS/ATTS/QM_IDLE DND
hi guys i have verified 100% passable dumps only 65Q’s for 300-208. if anyone is interested please reach out to me at danny gonzopa @ gmail . com……please remove spaces from the email….i m not a dump seller i m just trying to recover the money for the dump…..the dump is very nominally priced……
@freeDecember 24th, 2019
hi everyone!
i had 7 new question.
1. what are 2 advantages get vpn over Easy VPN?
get vpn support multicast(correct)
get vpn is highly scabale(correct)
get vpn support hub and spoke
get has qos support
get has unique session keys
2. which i need to do to allow IKEv2 anyconnect access on the outside interface( picture ASDM)
IPsec ikev2 allow access must be checked (correct)
dtls must be unchecked
ssl allow acess must be unchecked
3. two command use for debug ASA IKEv2
debug crypto ikev2 platform
debug crypto ikev2 protocol
4. which two types of serverfers can be used as distribution point for crls
http (select) correct
subordinate ca (select)not correct
ldap – this one is correct
scp Iam not sure
sdp Iam not sure
5. picture with configuration tunnel interface. select which type of vpn
dmvpn (bc tunnel mode gre multipoint)
6. which algoritm must be used that superposition from attack
aes-192 (select)
sha-384
rsa-3072
ecdsa -384 (i am sure)correct
7. encrouption counter is increasing and decruption counter is not. where is the problem
phase 2 (select)
acl
psk
peer address (not sure)
I think ACL is correct because the problem is in phase 2 and it might be possible that ACL is not permitting the inbound traffic…that is why decrypt counter is not increasing.
i had 7 new question.
1. what are 2 advantages get vpn over Easy VPN?
get vpn support multicast(correct)
get vpn is highly scajbale(correct)
get vpn support hub and spoke
get has qos support
get has unique session keys
2. which i need to do to allow IKEv2 anyconnect access on the outside interface( picture ASDM)
IPsec ikev2 allow access must be checked (correct)
dtls must be uncheckwded
ssl allow acess must be unchecked
Hi Guys,
Do you have the VCE file for exam 300-209?
In addition, I can send the Supermario dumps if you need it.
Thanks.
hi guys i have verified 100% passable dumps with correct answers:
300-208 65Q’s
300-209 76Q’s
if anyone is interested please reach out to me at danny gonzopa @ gmail . com……please remove spaces from the email….i m not a dump seller i m just trying to recover the money for the dump…..the dump is very nominally priced – $20…
About 7 new questions:
1. what are 2 advantages get vpn over Easy VPN?
A) get vpn support multicast(correct)
B) get vpn is highly scabale(correct)
C) get vpn support hub and spoke
D) get has qos support
E) get has unique session keys
In my opinion A and D is correct. Easy VPN doesn’t support multicast and QoS.
7. encryption counter is increasing and decryption counter is not. where is the problem
A) phase 2 (select)
B) acl
C) psk
D) peer address (not sure)
I think B is correct. If the packets are encrypted then phase 2, must have been complited.
Hi,
Anyone knows jest is the correct order is DMVPN D&D question ?
Thx
@Vass
– The spoke receives MM6 from the hub, and responses with QM1 to the hub to begin quick mode.
– The received attributes are accepted as the hub receives QM1 and respons with QM2 creating Phase 2 SAs for this session.
– The ISAKMP and IPsec negotiation is complete, which creates an IPsec session to encrypt GRE traffic between the two peers.
– The crypto session is up and packets are encapsulated within the GRE over IPsec tunnel.
– The spoke generates an NHRP registration request, which is sent across the GRE over IPsec tunnel.
– The Hub receives the NHRP registration request and sents NHRP registration reply after it confirms that the spoke has a valid tunnel and Nonbroadcast Multiaccess address. The spoke receives this NHRP registration reply.
https://www.cisco.com/c/en/us/support/docs/security-vpn/dynamic-multi-point-vpn-dmvpn/116957-technote-dmvpn-00.html
Dear All,
Any one can share the LAB for the exam 300-209.
I will be attempting this exam coming week.
@R82
Even with references, i have seen so many different answers related to this question that now I am confused…
@Brad
That was my answer and it didn’t go wrong
@R82: Do you have the dumps for 300-210 & 300-208 exams ?
could you please guide me to the relevant pages of discussions
Anyone has something for 300-209 more narrow and valid than supermarioV4? Can offer exchange for any of the rest (300-206,300-208,300-210).
@trt1234: try this below
od.lk/fl/MThfMTE2NTQ4NF8
are questions 85-94 even relevant for 300-209? This is for the supermario dump by the way.
Still looking for some narrow 300-209 valid materials. I have passed all other exams, I have supermariov4, 300-206, 300-208 and 300-210 materials for exchange if you want.
@wild_wolf thanks for trying, but that´s even longer than supermariov4
@trt1234 i have a dump with only 76 questions. I will have someone take the exam tomorrow and i can tell you if that was valid or not….
What is the final correct answer?
The question was repeated many times before
An Engineer must configure GETVPN to transfer over the network between corporate offices.
which two options are the advantages to choose GETVPN over EZVPN? (TWO)
A. GETVPN is highly scalable any to any mesh topology
B. GETVPN has QoS support
C. GETVPN has unique session keys for improved security
D. GETVPN supports multicast
E. GET VPN supports a hub-and -spoke topology
@Danny that would be amazing!!
Anyone got the lab configs or knows of a site with them on
What is the final correct answer?
The question was repeated many times before
An Engineer must configure GETVPN to transfer over the network between corporate offices.
which two options are the advantages to choose GETVPN over EZVPN? (TWO)
A. GETVPN is highly scalable any to any mesh topology
B. GETVPN has QoS support
C. GETVPN has unique session keys for improved security
D. GETVPN supports multicast
E. GET VPN supports a hub-and -spoke topology
Answer: A,D
DMVPN D&D has been finally changed in the exam300-209. I got first 8 steps, not the quick mode one.
Please read this article and do it.
https://www.cisco.com/c/en/us/support/docs/security-vpn/dynamic-multi-point-vpn-dmvpn/116957-technote-dmvpn-00.html
Hi Guys,
I have cleared my exam with 9xx today. the Supermario dumps still valid + Free specified new questions.
The DMVPN D&D has changed completely with 8 steps with completely different options so please make sure you learn the complete process, you can find that below url or refer Anonymous (January 19th, 2020 comment )
https://www.cisco.com/c/en/us/support/docs/security-vpn/dynamic-multi-point-vpn-dmvpn/116957-technote-dmvpn-00.html
i had some bug in Site-to-Site simlet, the show command says current transformset is “EPS-3DES ESP-SHA-HMAC” while the options say “Default, TSET, “EPS-AES ESP-SHA-HMAC, and other option” . which is not correct so i have left a comment on the question.
Apart from above
SSL VPN BOOKMARK
VERIFY IPSEC (transform set,preshare etc)
DND :PCAPS/ATTS/QM_IDLE DND
@trt1234: would you able to share the 300-208 and 300-210 dumps please ?
@Wild_Wolf
TSET was the name of the transform-set and that is what asked in the question. I got the same question in the simlet.
For exam 300-208
https://www.dropbox.com/s/1if5ttz1p1kxi21/300-208.docx?dl=0
Dear All,
SSL VPN BOOKMARK is available in super mario file.
I need SSL VPN BOOKMARK.
thanks
All just did the exam but failed but here is my info i got 830
On the Multiple choice all from Supermario nothing changed.
LAB was same but i was not able to check the two bookmarks when i logged backed into the clientless portal in IE as there was nothing i was able to click am not sure if this has reduced my marks ?? may be not .
Drag and drop yes the DMPVN changed to 8 steps and i am sure i am wrong and this is the only reason i should have failed anyway taking the exam next week . but 100% sure that super marion is valid expect for the DMPVN drag and drop .
no new questionf for me and i got the new questions posted @ free yes all came in my exam .
@Wild_Wolf, sorry but as of now I’m looking for an exchange. Waiting for news from. @Danny