Share your SISE Experience

Hi Guys !

Has anyone taken the exam recently?

please share your thoughts

Most of dumps are unstable

@TULFO

When you’ll get the exam ?

use the 66q/120q file is the last stable.

Its not updated but can increase your chance to pass

1 new DD TACACS vs RADIUS

@Kati,

where can we find these questions .the 66q/120q files please assist.

Thanks.

Hi Guys,

Kindly share the dump.

@Anonymouse

PLEASE SHARE DUMPS ASAP!!!

@Kati

THIS WEEKEND IF DUMP AVAILABLE. I DID NOT REVIEW, WILL RELY FULL ON DUMPS.

Here the 66q/120q

remove spaces

mediafire. com/ file/05xcggq7rnoh2lg /300-715_130_LAST_STABLE_VALID_UNTIL_APR.txt/ file

hi anyone passed with 66 & 102 ?

How is policy services node redundancy achieved in a deployment?

A. by enabling VIP
B. by utilizing RADIUS server list on the NAD
C. by creating a node group
D. by deploying both primary and secondary node

Is answer C or D ?

Which three options are benefits of using TACACS+ on a device? (Choose three)
A . It ensures that user activity is untraceable
B . It provides a secure accounting facility on the device.
C . device-administration packets are encrypted in their entirely.
D . It allows the user to remotely access devices from other vendors.
E . It allows the users to be authenticated against a remote server.
F . It supports access-level authorization for commands.

Answer: CEF ??

Did anyone recently passed Cisco 300-715 SISE. Where can I get valid dumps?

Hi guys,

I wrote yesterday and passed: 86X

I used the 66q and 102q, though not 100% valid but if you study with understanding you can make it. Also used BRKSEC-2695.

I came across a lot of new questions though around 20, i will try to remember there and there.

I had 2 drag and drops: Difference between Radius and Tacacs, and another one was difference between EAP-TLS and PEAP-MSCHAPv2

Hi Guys

May you please post the dump again

Hi Guys,

passed with 89X

Used 66/102q. 20 New Questions

BRKSEC-2695 is very useful too

I had 2 drag and drops:

EAP-TLS and PEAP-MSCHAPv2 from dump

Difference between Radius and Tacacs
– tacacs
encrypts whole traffic
used for drvice admin
…?
– radius
used for network access
ecrypts ony pass
..?

here some questions that I remember

Cisco ise is being migrated, how to migrate the defined users?
xls
csv*

What will happen when ISE lose connection with AD after restart?
– interfaces on the switch will stay down
– i picked an answer with AD join

What you should use if you wat to configure Kerberos with Cisco ISE
– AD
– LDAP *
– RSA token

Why ISE doest see all AD groups after AD cofiguration?
-They should be manualy added to ISE
– I picked a answer with information that AD groups should be taken from AD and saved in ISE first

ISE sends a CoA to a NAD after a user logs in…
– dACL provided in CoA

What to do to remove standard access lists from switches?
– use dACL *
– configure extended acl

Thanks for all your help

stay safe and good luck

@Kati

May you please share the dump.

Thank you in advance

@Kati , nice to hear! Thank you for the dump.

And thanks for remembering new questions !

Hi Guys, what do you think about that?

How is policy services node redundancy achieved in a deployment?

A. by enabling VIP
B. by utilizing RADIUS server list on the NAD
C. by creating a node group
D. by deploying both primary and secondary node

I think the correct answer is B:
https://www.ciscopress.com/articles/article.asp?p=2812072&seqNum=2

Policy Service Nodes and Node Groups
PSNs do not necessarily need to have an HA type of configuration. Every ISE node maintains a full copy of the database, and the NADs have their own detection of a “dead” RADIUS server, which triggers the NAD to send AAA communication to the next RADIUS server in the list.
NADs have some built-in capabilities to detect when the configured RADIUS server is “dead” and automatically fail over to the next RADIUS server configured.

@Bobo Longo
This question does seem like a gotcha but , there is a screen under System> Deployment and the popup states that when failover is required assign the nodes to a node group. Since the question mentions the word Deployment I feel like they are asking what you have to do on ISE. That said I’m in a setup that has no Node Groups but the NAD’s definitely use radius server lists.

@Rick Sanchez
Hello, thank you for your interest in my question.

Okay, so in this development case should we consider the answer c as the correct one?

Sorry Rick but I still think that the correct answer is b, and c and d are ways to achieve redundancy

This question has a trick

Passed the exam 85x
Followed all duterte, names and kati advise.
Thank you for sharing all your experience!

@Anonymous

Which dump did you use the one shared by Kate or there is a different one please share.

In this case C answer is correct , this is due to the fact that if node with active sessions goes down ,endpoints with those sessions stay in stuck in intermediate state and will not be able to re-initialize authorization . So second node in node group will issue CoA to close session and start reauthorization with some other node.

https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html#wp1134272

@Iggy, @Rick Sanchez
Hello, OK you are right, now is clear, thank you

Hi Guys, what do you think about that?

In a Cisco ISE split deployment model, which load is split between the nodes?
A. log collection
B. device admission
C. AAA
D. network admission

I think the correct answer is C.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/install_guide/b_ise_InstallationGuide24/b_ise_InstallationGuide24_chapter_00.html

Split Deployments
In split Cisco ISE deployments, you continue to maintain primary and secondary nodes as described in a small Cisco ISE deployment. However, the AAA load is split between the two Cisco ISE nodes to optimize the AAA workflow.

Some people think that the correct answer is A, Can anyone hel me?

Thak you

@Bobo Longo

I think document is absolutely clear what split deployment is (AAA). Log collection is also part of AAA (accounting).

Homer is a reliable source, contact him about SISE dumps

hi mates, what is BRKSEC-2695?

@SISEE

BRKSEC-2695 is a cisco live presentation

you can access here

ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKSEC-2695.pdf

TQ.

Anyone attempted the exam with the dumps this month?Yr response gr8ly appreciated. I’m having my exam end of this month.

A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server. Which two commands should be run to complete the configuration? (Choose two)
A. AAA authorization auth-proxy default group radius
B. radius server vsa sand authentication
C. radius-server attribute 8 include-in-access-req
D. IP device tracking
E. dot1x system-auth-control
Answer: B,C

A network engineer needs to ensure that the access credentials are not exposed during the 802.1X authentication among components. Which two protocols should be configured to accomplish this task? (Choose two.)
A. PEAP
B. EAP-TLS
C. EAP-MD5
D. EAP-TTLS
E. LEAP

Correct answer – B,C

Hello Fil, I think B and C are correct in both questions

what do you think about that?

What happens when an internal user is configured with an external identity store for authentication, but an engineer uses the Cisco ISE admin portal to select an internal identity store as the identity source?
A. Authentication is redirected to the internal identity source.
B. Authentication is granted.
C. Authentication fails.
D. Authentication is redirected to the external identity source.

Correct answer – C

Thank you

hi,
i am writing exam next week,pls anyone share valid dumps

A network engineer needs to ensure that the access credentials are not exposed during the 802.1X authentication among components. Which two protocols should be configured to accomplish this task? (Choose two.)
A. PEAP
B. EAP-TLS
C. EAP-MD5
D. EAP-TTLS
E. LEAP

Correct answer – AD

@HOMER

hw do we know that you are not a spammers like others too? or with fake dumps(copypaste from other dump sites & resale).

If you are genuine , post half of the qns here.

What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
A. Application Visibility and Control
B. Supplicant Provisioning Wizard
C. My Devices Portal
D. Network Access Control

Correct ans : B or C ????

Bobby,

The correct answer is B

@Gaboroso
Thx.

A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server. Which two commands should be run to complete the configuration? (Choose two)

A. AAA authorization auth-proxy default group radius
B. radius server vsa sand authentication
C. radius-server attribute 8 include-in-access-req
D. IP device tracking
E. dot1x system-auth-control

Correct Answer: BD or DE ??

A user reports that the RADIUS accounting packets are not being seen on the Cisco ISE server.
Which command is the user missing in the switch’s configuration?

A. aaa accounting resource default start-stop group radius
B. radius-server vsa send accounting
C. aaa accounting network default start-stop group radius
D. aaa accounting exec default start-stop group radius

Correct Ans: b or c ???

Bobby,

B is correct

Gaboroso,thx.

@ Anonymous

Please share the link or do we have to take out the vv

dont follow the scams.

Writing next month, any updated dumps

Hi Guys

who can share the valid dump with us please help am writing end of month

Please share the actual link for the dumps

Guys any dumps please share.. writing next month

friends passed sise today. used homers dump and got 895. go for it. gud luck

Hi All,
I am writing Cisco ISE 300-715 next month , Could you please share dumps. @securitytut .. let me know if you have any link so that i can pay

May you please share homers dump am writing Monday

Hey guys,

Anyone got Homer dump to share?

homers dump. you get 900 for sure.

mega . nz / file / thNAkTYK # pgWwz34z6mZgLQ3-sVv-5IwBEmSajBFhLX8X9eSYbvE

homies ..check it out
drive dot google dot com/drive /folders /1-jcJT1SxbH3DDB-cgSq_cPEhlxMEfvFK

Some of these answers are definitely wrong in the dumps . If its the exam passing that matters then the dumps will get you passed, but

I passed this exam because I scored 100% in three sections, but if you mess up in those sections then you will have definitely fail.

please share SCOR 350-701 dump

Hi Guys,

Any Updates/Experiences regarding the exam?

have a lab or just a multiple choice question?

This exam have simulation?

@Securitytut, do you have premium for SISE 300-715?

@securitytut…..I am looking for SISE 300-715…

Updates about the exam and dump??

did anyone take SISE 300-715 recently?

Sat today – don’t rely on the dump.

@Tortoise,

First of all, congrats!

Could you share with us, please?

I’ll wait you!

Hello, anyone could share the latest dumps?

Hey @Anonymous, what dumps did you use?

Could you share with us, please?

Has anyone ever come across a pdf of the SISE 300-715 Official Cert Guide book? I have no interest in having a physical book taking up more space.

hi everyone,
Please share the recent dumps, I am planning to present the next week. I am preparing with dumps shared in July, just checking if there is new questions

@Daniel where did you get July dumps? I found a google drive in this chain of comments with a dump file of august. But to be honest I don’t trust the answers there.

If you have a more reliable dump even though from july please share it

@daniel this is the one I found in the chain… but I don’t trust the answers
drive dot google dot com/drive /folders /1-jcJT1SxbH3DDB-cgSq_cPEhlxMEfvFK

@Fer
sorry but the dumb that I got is not reliable too, I also detected some mistakes. I have to search for the answers

This was share it in july
mega . nz / file / thNAkTYK # pgWwz34z6mZgLQ3-sVv-5IwBEmSajBFhLX8X9eSYbvE

@Daniel please share your experience when you do the exam. I am still in the studying phase. But I estimate to do it by the end of the year. For sure I will continue posting here about my experience and doubts about questions/answers
So if you have questions.. let’s discuss them here

Which three options are benefits of using TACACS+ on a device? (Choose three)
A . It ensures that user activity is untraceable
B . It provides a secure accounting facility on the device.
C . device-administration packets are encrypted in their entirely.
D . It allows the user to remotely access devices from other vendors.
E . It allows the users to be authenticated against a remote server.
F . It supports access-level authorization for commands.

C and F are for sure true. However, what do you think about B,D,E? the third option could be any of these!

In a Cisco ISE split deployment model, which load is split between the nodes?

A. AAA
B. network admission
C. log collection
D. device admission

The most accurate answer is AAA, but isn’t log collection part of AAA in accounting?

Can anyone explain the answer of this? B, D, E seem correct

What are two components of the posture requirement when configuring Cisco ISE posture? (Choose two)
A. updates
B. remediation actions
C. Client Provisioning portal
D. conditions
E. access policy

@Vaj
B and D are correct. To configure a requirement a condition and remediation action are required.

NEW QUESTIONS FROM LATEST DPSSSS

QUESTION 152
An organization wants to split their Cisco ISE deployment to separate the device administration functionalities from the mam deployment. For this to work, the administrator must deregister any nodes that will become a part of the new deployment, but the button for this option is grayed out. Which configuration is causing this behavior?

A. One of the nodes is an active PSN.
B. One of the nodes is the Primary PAN
C. All of the nodes participate in the PAN auto failover.
D. All of the nodes are actively being synched.

Answer: B

QUESTION 153
An organization is adding new profiling probes to the system to improve profiling on Oseo ISE. The probes must support a common network management protocol to receive information about the endpoints and the ports to which they are connected.
What must be configured on the network device to accomplish this goal?

A. ARP
B. SNMP
C. WCCP
D. ICMP

Answer: D

QUESTION 154
A network administrator is configuring a secondary cisco ISE node from the backup configuration of the primary cisco ISE node to create a high availability pair. The Cisco ISE CA certificates and keys must be manually backed up from the primary Cisco ISE and copied into the secondary Cisco ISE. Which command most be issued for this to work?

A. copy certificate Ise
B. application configure Ise
C. certificate configure Ise
D. Import certificate Ise

Answer: A

QUESTION 155
An employee logs on to the My Devices portal and marks a currently on-boarded device as `Lost’. Which option is correct?

A. Certificates provisioned to the device are not revoked
B. BYOD Registration status is updated to No
C. The device access has been denied
D. BYOD Registration status is updated to Unknown.
E. The device status is updated to Stolen

Answer: AE

QUESTION 156
An administrator connects an HP printer to a dot1x enable port, but the printer in not accessible. Which feature must the administrator enable to access the printer?

A. MAC authentication bypass
B. change of authorization
C. TACACS authentication
D. RADIUS authentication

Answer: A

QUESTION 157
A new employee just connected their workstation to a Cisco IP phone. The network administrator wants to ensure that the Cisco IP phone remains online when the user disconnects their Workstation from the corporate network. Which CoA configuration meets this requirement?

A. Port Bounce
B. Reauth
C. NoCoA
D. Disconnect

Answer: C

QUESTION 158
An administrator is configuring cisco ISE lo authenticate users logging into network devices using. Which action ensures the users are able to log into the network devices?

A. Enable the device administration service in the Administration persona
B. Enable the session services in the administration persona
C. Enable the service sessions in the PSN persona.
D. Enable the device administration service in the PSN persona.

Answer: A

QUESTION 159
A network administrator must use Cisco ISE to check whether endpoints have the correct version of antivirus installed. Which action must be taken to allow this capability?

A. Configure a native supplicant profile to be used for checking the antivirus version
B. Configure Cisco ISE to push the HostScan package to the endpoints to check for the antivirus version.
C. Create a Cisco AnyConnect Network Visibility Module configuration profile to send the antivirus information of the endpoints to Cisco ISE.
D. Create a Cisco AnyConnect configuration within Cisco ISE for the Compliance Module and associated configuration files

Answer: C

QUESTION 160
A network administrator must configura endpoints using an 802 1X authentication method with EAP identity certificates that are provided by the Cisco ISE. When the endpoint presents the identity certificate to Cisco ISE to validate the certificate, endpoints must be authorized to connect to the network. Which EAP type must be configured by the network administrator to complete this task?

A. EAP-PEAP-MSCHAPv2
B. EAP-TTLS
C. EAP-FAST
D. EAP-TLS

Answer: C

QUESTION 161
An engineer is creating a new TACACS* command set and cannot use any show commands after togging into the device with this command set authorization. Which configuration is causing this issue?

A. Question marks are not allowed as wildcards for command sets.
B. The command set is allowing all commands that are not in the command list
C. The wildcard command listed is in the wrong format
D. The command set is working like an ACL and denying every command.

Answer: A

QUESTION 162
An organization is migrating its current guest network to Cisco ISE and has 1000 guest users in the current database. There are no resources to enter this information into the Cisco ISE database manually. What must be done to accomplish this task effciently?

A. Use a CSV file to import the guest accounts
B. Use SOL to link me existing database to Ctsco ISE
C. Use a JSON fie to automate the migration of guest accounts
D. Use an XML file to change the existing format to match that of Cisco ISE

Answer: C

QUESTION 163
MacOS users are complaining about having to read through wordy instructions when remediating their workstations to gam access to the network. Which alternate method should be used to tell users how to remediate?

A. URL link
B. message text
C. executable
D. file distribution

Answer: A

QUESTION 164
Refer to the exhibit. Which component must be configured to apply the SGACL?
image_thumb

A. egress router
B. host
C. secure server
D. ingress router

Answer: A

QUESTION 165
What does a fully distributed Cisco ISE deployment include?

A. PAN and PSN on the same node while MnTs are on their own dedicated nodes.
B. PAN and MnT on the same node while PSNs are on their own dedicated nodes.
C. All Cisco ISE personas on their own dedicated nodes.
D. All Cisco ISE personas are sharing the same node.

Answer: B

QUESTION 166
A network engineer has been tasked with enabling a switch to support standard web authentication for Cisco ISE. This must include the ability to provision for URL redirection on authentication. Which two commands must be entered to meet this requirement? (Choose two)

A. Ip http secure-authentication
B. Ip http server
C. Ip http redirection
D. Ip http secure-server
E. Ip http authentication

Answer: DE

QUESTION 167
An engineer is configuring a dedicated SSID for onboarding devices.
Which SSID type accomplishes this configuration?

A. dual
B. hidden
C. broadcast
D. guest

Answer: D

QUESTION 168
An engineer is implementing network access control using Cisco ISE and needs to separate the traffic based on the network device ID and use the IOS device sensor capability.
Which probe must be used to accomplish this task?

A. HTTP probe
B. NetFlow probe
C. network scan probe
D. RADIUS probe

Answer: A

QUESTION 169
An administrator is trying to collect metadata information about the traffic going across the network to gam added visibility into the hosts. This Information will be used to create profiling policies for devices us mg Cisco ISE so that network access policies can be used.
What must be done to accomplish this task?

A. Configure the RADIUS profiling probe within Cisco ISE
B. Configure NetFlow to be sent to me Cisco ISE appliance.
C. Configure SNMP to be used with the Cisco ISE appliance
D. Configure the DHCP probe within Cisco ISE

Answer: B

QUESTION 170
A laptop was stolen and a network engineer added it to the block list endpoint identity group.
What must be done on a new Cisco ISE deployment to redirect the laptop and restrict access?

A. Select DenyAccess within the authorization policy.
B. Ensure that access to port 8443 is allowed within the ACL.
C. Ensure that access to port 8444 is allowed within the ACL.
D. Select DROP under If Auth fail within the authentication policy.

Answer: D

QUESTION 171
An administrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE.
What must be done to accomplish this configuration?

A. Enable the privilege levels in Cisco ISE
B. Enable the privilege levels in the IOS devices.
C. Define the command privileges for levels 2-5 in the IOS devices
D. Define the command privileges for levels 2-5 in Cisco ISE

Answer: C

QUESTION 172
An administrator is configuring RADIUS on a Cisco switch with a key set to Cisc403012128 but is receiving the error “Authentication failed: 22040 Wrong password or invalid shared secret.”.
What must be done to address this issue?

A. Add the network device as a NAD inside Cisco ISE using the existing key.
B. Configure the key on the Cisco ISE instead of the Cisco switch.
C. Use a key that is between eight and ten characters.
D. Validate that the key is correct on both the Cisco switch as well as Cisco ISE.

Answer: A

QUESTION 173
Drag and Drop Question
Drag the descriptions on the left onto the components of 802.1X on the right.

@Vaj

Can anyone explain the answer of this? B, D, E seem correct

What are two components of the posture requirement when configuring Cisco ISE posture? (Choose two)
A. updates
B. remediation actions
C. Client Provisioning portal
D. conditions
E. access policy

D,E
https://community.cisco.com/t5/security-documents/ise-posture-prescriptive-deployment-guide/ta-p/3680273

“Configuring posture assessment in ISE requires several components to be taken into consideration: Conditions, Remediations, Requirements, Posture Policy, Client Provisioning and Access Policy. “

In a Cisco ISE split deployment model, which load is split between the nodes?

A. AAA <<<<<<<<<<<<<<<<<<
B. network admission
C. log collection
D. device admission

"In split Cisco ISE deployments, you continue to maintain primary and secondary nodes as described in a small Cisco ISE deployment. However, the AAA load is split between the two Cisco ISE nodes to optimize the AAA workflow."

@Sherlock
Posture requirement, not posture process
B. remediations
D. conditions
It is the correct answer.
https://community.cisco.com/t5/security-documents/ise-posture-prescriptive-deployment-guide/ta-p/3680273#toc-hId–1843192725

Hi, passed exam today, lots of new questions besides the ones I provided above.

how much question in the dumps..it’s valid ?

hi guys where can i register to take this dumps i dont see anything where i can register for sise exam dumps

@aaa Dumps are valid only for SCOR exam.

HQA the website dont have sise dumps?

@aaa Yes, this website has dumps only for SCOR exam, at least so far.

What does a fully distributed Cisco ISE deployment include?

A. PAN and PSN on the same node while MnTs are on their own dedicated nodes.
B. PAN and MnT on the same node while PSNs are on their own dedicated nodes.
C. All Cisco ISE personas on their own dedicated nodes. \\\\\\\\\\\\\
D. All Cisco ISE personas are sharing the same node.

Answer should be C… IDK why they mark it as B.

what are some good dumps for SISE

anyone have labminutes videos for Cisco ISE?

Hi everyone, Does anyone have valid dimps for any concentration test?
SCOR Dumps are still valid, have a few new questions.

Can anyone confirm that passleader dumps are valid?

CAN ANYONE PLEASE EXPLAIN WHY THE ANSWER HERE IS D??????

An organization is adding new profiling probes to the system to improve profiling on Oseo ISE. The probes must support a common network management protocol to receive information about the endpoints and the ports to which they are connected.
What must be configured on the network device to accomplish this goal?

A. ARP
B. SNMP
C. WCCP
D. ICMP

Answer: D

Can anyone share with me the SISE dumps?

where can i find sise question i see people here share question, help please

Passleader dumps are not valid, around half of the questions were new…

@sysadmin

Where the new questions difficult.

May you share some of the new stuff

I will write them down soon. They focused heavily on posture.

@sysadmin thanks. I will be waiting. Also share the passleader pdf. I am taking the exam early next week.

Can anyone explain the answer of this?
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010.html

According this link, I see that questions marks can actually be used as wildcards in command sets.

Maybe I am confused with the question… but none of the answers here make sense.

QUESTION 161
An engineer is creating a new TACACS* command set and cannot use any show commands after togging into the device with this command set authorization. Which configuration is causing this issue?

A. Question marks are not allowed as wildcards for command sets.
B. The command set is allowing all commands that are not in the command list
C. The wildcard command listed is in the wrong format
D. The command set is working like an ACL and denying every command.

Answer: A

hi,

hoping all are doing well! i am planning to have this exam on 20th December 2021.

looking forward for your kind support………

Many Thanks!