Share your SECURE Experience

@Dave do you have the latest PL questions?

If you have can you please share?

Hi All,
Sorry was away for a while..

I cleared 300-208 today ( 900) … Same questions as i posted earlier…

You can download the doc in below link (remove stars)

https:** //drive.google.com/file/d/1tvgqYO9n3dEwB6Mb6mysOqNd5msXOZVs/view?usp=sharing

@PP

Which personal device portal support ISE: (Choose 2)
blacklist
My device portal
end-user
whitelist
Hotspot-GUEST

@PP & Keyser Soze

Yes, I think it’s D too.

———————————-

@Dave, @PP
A client is quarantined during a Cisco ISE posture assessment. After which two events can the client undergo a posture reassessment?
A.When the wired client disconnects and reconnects to the network
B.When the supplicant is reconfigured
C.When the client reinstall the posture agent
D.When the reauthentication timer for the authorization profile is triggered
E.When the network transition delay timer expires

Correct answer: A & D (D is sure)

@PP & Keyser,

Which statement about hot-spot guest access in a corporate environment that provides BYOD access for employees is true?
A.It uses TACACS + to support user guest credential.
B.The BYOD portal must be configured on a separate SSID from the guest hotspot.
C.It uses WPA authentication, which allows it to provide connectivity to more device types.
D.Traffic to the employees BYOD portal must be directed to different WLC than guest traffic.

@Danny,

Here is a tiny problem, I spoke to Spoto, and their dump consists of MORE than 65qs, so either you are lying, or you are one of the guys here on the forum that is reselling the questions gathered from the forum.

Here is another problem, I don’t mind the $20/=, but I don’t trust you enough to be willing to provide you with my contacts and details which is necessary for the transaction to be successful. Why not just post those 65Qs and then focus on getting a real job ?

Anybody has the diagram and full questions for the following ?

Scenario:
Currently, many users are expehecing problems using their AnyConnect NAM supplicant to login to the network. The rr desktop support staff have already examined and vehfed the AnyConnect NAM configuration is correct.
In this simulation, you are tasked to examine the various ISE GUI screens to determine the ISE current configurations to help isolate the problems. Based on the current ISE configurations, you will need to answer three multiple choice questions.
To access the ISE GUI, click on the ISE icon in the topology diagram to access the ISE GUI.
Not all the ISE GUI screen are operational in this simulation and some of the ISE GUI operations have been reduced in this simulation.
Not all the links on each of the ISE GUI screen works, if some of the links are not working on a screen, click Home to go back to the Home page first. From the Home page, you can access all the required screens.
To view some larger GUI screens, use the simulation window scroll bars. Some of the larger GUI screens only shows partially but will include all information required to complete this simulation.

@PP & Keyser

Determine which can be two reasons why many users like the Sales and fT users are not able to authenticate and access the network using their AnyConnect NAM client with EAP- FAST.(Choose two.)
A.The DotlX authentication policy is not allowing the EAP-FAST protocol.
B.The rr_Corp authorization profile has the wrong Access Type configured.
C.The authorization profile used for the Sales users is misconfigured.
D.The order for the MAB authentication policy and the DotlX authentication policy should bereversed.
E.Many of the fT Sales and fT user machines are not passing the ISE posture accessment.
F.he PERMrr_ALL_TRAFFIC DACL is missing the permit ip any any statement it the end.
G.The Employee_FullAccess_DACL DACL is missing the permit ip any any statement in the end.

You have a VPN client that is quarantined.
Which action do you take to restart the posture session?

A.Send a CoA message
B.Reconnect the VPN tunnel.
C.Configure a authentication timer
D.Enable periodic reassessment

A security engineer must provision dynamic TrustSec classifications. Which two classification options must the engineer select to accomplish this task? (Choose two.)

A.interface
B.802.1X
C.MAB
D.IP subnet
E.VLAN

Last question since nobody seems to be really interested in discussion. Good luck to all.

Which two statements are true when redirecting traffic to the client provisioning portal?

A.Endpoint redirection to the client provisioning portal must solely be configured on the Cisco ISE.
B.The redirect ACL configured on the switch is referenced by an authorization policy rule.
C.A redirect ACL on the switch will typically deny basic services.
D.The ACL name defined on the ISE must match the local ACL defined on the switch.

@ DAVE

A security engineer must provision dynamic TrustSec classifications. Which two classification options must the engineer select to accomplish this task? (Choose two.)

A.interface
B.802.1X
C.MAB
D.IP subnet
E.VLAN

correct 802.1x and MAB

@DAVE

Which two statements are true when redirecting traffic to the client provisioning portal?

A.Endpoint redirection to the client provisioning portal must solely be configured on the Cisco ISE.
B.The redirect ACL configured on the switch is referenced by an authorization policy rule.
C.A redirect ACL on the switch will typically deny basic services.
D.The ACL name defined on the ISE must match the local ACL defined on the switch.

correct A and D

@DAVE

You have a VPN client that is quarantined.
Which action do you take to restart the posture session?

A.Send a CoA message
B.Reconnect the VPN tunnel.
C.Configure a authentication timer
D.Enable periodic reassessment

For this one i think reconnect the VPN tunnel should be the one

@Dave

Which statement about hot-spot guest access in a corporate environment that provides BYOD access for employees is true?
A.It uses TACACS + to support user guest credential.
B.The BYOD portal must be configured on a separate SSID from the guest hotspot.
C.It uses WPA authentication, which allows it to provide connectivity to more device types.
D.Traffic to the employees BYOD portal must be directed to different WLC than guest traffic.

my bet is B

@SP

If all questions were from the file. From which ones do you think are not correct.

@PP… Few answers are incorrect ( not sure which one) – the doc link i shared has around 55 exact questions that came in exam out of 60…

All the best …

@SP Thanks for the reply and what you shared!

Which two Cisco Catalyst switch interface commands allow only a single voice device and a single data device to be connected to the IEEE 802.1Xenabled interface? (Choose two.)

A. authentication host-mode single-host
B. authentication host-mode multi-domain
C. authentication host-mode multi-host
D. authentication host-mode multi-auth

@SP,

Is this correct on your lab ? The answer is different from PL.

Which of the following statement is correct?
A.Currently,IT users who successfully authenticate will have their packets tagged withaSGTof3.
B.Currently,ITusers who successfully authenticate will be assigned to VLAN 9.
C.Currently, any domain administrator who successfully authenticate will be assigned to VLAN 10.
D.Computers belonging to the secure-x domain which passes machine authentication but faileduser authentication will have the Employee_Restricted_DACL applied.
E.Print Servers matching the Linksys-PrintServer identity group will have the following accessrestrictions:
permit icmp any host 10.10.2.20
permit tcp any host 10.10.2.20 eq 80
permit icmp any host 10.10.3.20
permit tcp any host 10.10.3.20 eq 80 deny ip any any

Answer: D

@PP,

Not sure what’s the correct answer for this. I remember reading the forum, think there has been a discussion. Don’t have the time to look thru.

———————-
Which two Cisco Catalyst switch interface commands allow only a single voice device and a single data device to be connected to the IEEE 802.1X enabled interface? (Choose two.)

A. authentication host-mode single-host
B. authentication host-mode multi-domain
C. authentication host-mode multi-host
D. authentication host-mode multi-auth

@ Dave can you please share the PL file you have.

Thanks

pikatsoni @ gmail.com

@PP,

No, that’s wrong.

—————–
@DAVE

Which two statements are true when redirecting traffic to the client provisioning portal?

A.Endpoint redirection to the client provisioning portal must solely be configured on the Cisco ISE.
B.The redirect ACL configured on the switch is referenced by an authorization policy rule.
C.A redirect ACL on the switch will typically deny basic services.
D.The ACL name defined on the ISE must match the local ACL defined on the switch.

correct A and D

@DAVE

OK noted Thanks

Can you please share the PL you have

pikatsoni @ gmail.com

@Dave
i do have a real job and yes you are right the ones from spoto have 176Q’s the thing is i have filtered them out to the ones that do appear in the exam….i have paid $100 for this file and all i m looking to do is recover some of the money i spent on the dumps…..also i understand your concern with details about money transaction……trust me i had those concerns as well and there are easy ways around it…all i can tell you is i have sold this to two others and they have passed with 0 new questions in the exam…

Should be BD

—————————-
@DAVE

Which two statements are true when redirecting traffic to the client provisioning portal?

A.Endpoint redirection to the client provisioning portal must solely be configured on the Cisco ISE.
B.The redirect ACL configured on the switch is referenced by an authorization policy rule.
C.A redirect ACL on the switch will typically deny basic services.
D.The ACL name defined on the ISE must match the local ACL defined on the switch.

correct A and D

I’ll leave it to the other guys here to decide if they want to believe you. :-D

If you really want me to believe you. Tell me something in your 65Qs that has NOT been discussed in this forum or covered by PL523 or Korish or Gio.

———————————————

@Dave
i do have a real job and yes you are right the ones from spoto have 176Q’s the thing is i have filtered them out to the ones that do appear in the exam….i have paid $100 for this file and all i m looking to do is recover some of the money i spent on the dumps…..also i understand your concern with details about money transaction……trust me i had those concerns as well and there are easy ways around it…all i can tell you is i have sold this to two others and they have passed with 0 new questions in the exam…

@PP

What do you think is the answer ?

Which two services does TACACS+ support?
A.SLIP
B.ARAP
C.S/MINE
D.Native AD
E.x-509

What do you think is the answer ?

Which two services does TACACS+ support?
A.SLIP
B.ARAP
C.S/MINE
D.Native AD
E.x-509
——————–
D & E

Anybody has the correct Solution for Remediation D&D ?

Thanks !!

Which two Cisco Catalyst switch interface commands allow only a single voice device and a single data device to be connected to the IEEE 802.1X enabled interface? (Choose two.)

A. authentication host-mode single-host
B. authentication host-mode multi-domain
C. authentication host-mode multi-host
D. authentication host-mode multi-auth
—————————
B & C

@DAVE

Which two services does TACACS+ support?
A.SLIP “this is a network method list”
B.ARAP “this is a network method list”
C.S/MINE this i cannot find what it is
D.Native AD “Tacacs+ can be configured with Active Directory”
E.x-509 “Also this one can be used by Tacacs+ with certificates”

I will go for D and E

@PP,

Thanks !! You are probably right, I was thinking A and B . Didn’t read properly.

————

@DAVE

Which two services does TACACS+ support?
A.SLIP “this is a network method list”
B.ARAP “this is a network method list”
C.S/MINE this i cannot find what it is
D.Native AD “Tacacs+ can be configured with Active Directory”
E.x-509 “Also this one can be used by Tacacs+ with certificates”

I will go for D and E

Keyser,

I found the answer once, but I seems to have misplaced and also forgotten but multi-host seems to be that it allows more than a single voice and a single data. At least according to the doc.

———————

Which two Cisco Catalyst switch interface commands allow only a single voice device and a single data device to be connected to the IEEE 802.1X enabled interface? (Choose two.)

A. authentication host-mode single-host
B. authentication host-mode multi-domain
C. authentication host-mode multi-host
D. authentication host-mode multi-auth
—————————
B & C

An engineer has implemented 802.1X on a cisco 2960x switch with this port configuration:

switch(config-if)#switchport mode access
switch(config-if)#dot1x pae authenticator
switch(config-if)#dot1x port-control auto
switch(config-if)#end

When a non-managed network switch is connected 802.1X fails, which reason for this failure is true?

A. The mab command is missing.
B. The authentication host-mode multi-auth command is miss
C. EAPOL frames are not being forwarded
D. BPDU frames are not being sent.
E. The authentication host-mode multi-host command is miss.

Answer: B ???

@Dave

In “multi-host” mode only device mac is authenticated (first mac) … all subsequent devices get access

In Gio’s doc Question 63 is related, but the meaning is different:

After an endpoint has completed authentication with MAB, a security violation is triggered because a different MAC address was detected. Which host mode must be active on the port?
A. single-host mode
B. multidomain authentication host mode
C. multiauthentication host mode
D. multihost mode

————————
Which two Cisco Catalyst switch interface commands allow only a single voice device and a single data device to be connected to the IEEE 802.1X enabled interface? (Choose two.)

A. authentication host-mode single-host
B. authentication host-mode multi-domain
C. authentication host-mode multi-host
D. authentication host-mode multi-auth

@Dave
hey sorry you think i do not have a valid dump but students are buying and passing from my file.

Also regarding new questions i agree there are no new questions but compared to the 523Q file people prefer to do 65Q’s with accurate answers….a lot of the answers on the PL523Q’s are incorrect…..

please reach out to me if you want to contribute $20 towards the cost of the 300-208(65Q’s) or 300-209 (76Q’s) on dannygonzopa @ gmail dot com and i will share the file with you….

@ALL ,

Read the last 5 pages of this forum, it is more than enough to pass the 300-208 as a number guys has mentioned. I’m done and signing out. All questions I posted/asked came out. Answers might be different from what you think though, do your research, discussed.
Many questions have slightly different choices, some questions has 5 options instead of 4 options.
Every question or some variation of it are already discussed except maybe 2 new .

Words matters, keep an eye on the words used in both the questions and answers. For example, Profiles vs Policies, Connected vs Authenticated, Services vs Protocols.

Study – Official Course ebooks , Home lab.
Reviews – Cisco.com , PL523
Last Min Review – Gio, Korish, forums and SP.

Save your money, don’t bother buying fake or 4th hand dumps from CCNP Swtich, Ahmad, Danny, etc.

Hi all,
passed last ccnp sec exam 208.
last 5-6 pages has enough information to pass. just read it carefully. all links, files and comments.
the most important are the comments here but do not forget about the korish file. only with questions from comments you will not pass.

Good luck!

@all
whats differences between “gio” and “korish” file dumps and where i find “korish” file
tx!

It’s basically Gio + recent updates from forum. Eitherway, you will have to read through the forum.

@Dave

Can you please share questions you had in the exam please.

@Dave

You must provide guest access without requiring a username or password. Guests must accept an AUP. Which type of portal do you implement?

Hotspot guest portal that uses an AUP and the auto login option
Hotspot guest portal that uses an AUP
Self-registered guest portal that uses an AUP
Sponsored-guest portal that uses an AUP

A: Hotspot guest portal that uses an AUP

Which statement about hot-spot guest access in a corporate environment that provides BYOD access for employees is true?

A. It uses TACACS+ to support user guest credential.
B. The BYOD portal must be configured on a separate SSID from the guest hotspot.
C. It uses WPA authentication, which allows it to provide connectivity to more device types.
D. Traffic to the employees BYOD portal must be directed to different WLC than guest traffic.

Answer: B

A security engineer Is deploying Cisco ISE. Which feature must the engineer node settings to enable guest services?

A. Profiling services
B. Session services
C. Monitoring services
D. pxGrid services

Which guest service requires session service to be enable on a Cisco ISE node?

A. Profile service
B. Posture service
C. Monitoring service
D. Administrator service

Which protocol sends authentication and accounting in different requests?

A. RADIUS
B. TACACS+
C. EAP-Chaining
D. PEAP
E. EAP-TLS

Answer: B

A client is quarantined during a Cisco ISE posture assessment. After which two events can the client undergo a posture reassessment? (Choose two.)

A. When the wired client disconnects and reconnects to the network.
B. When the supplicant is reconfigured.
C. When the client reinstall the posture agent.
D. When the reauthentication timer for the authorization profile is triggerd.
E. When the network transition delay timer expires.

Answer: AD

Which personal device portal support ISE:
blacklist
My device portal——Answer
end-user
whitelist
Hotspot-GUEST——-Answer

A security engineer must provision dynamic TrustSec classifications. Which two classification options must the engineer select to accomplish this task? (Choose two.)

A. interface
B. 802.1X
C. MAB
D. IP subnet
E. VLAN

Answer: BC

@Dave

sorry have been away fora while because of work pressure

@Dave

when is your exams? am trying to do it within the week from Wednesday to Friday not too sure of the day yet

@DEMUS

Which personal device portal support ISE:
blacklist I think this is the other one
My device portal——Answer
end-user
whitelist
Hotspot-GUEST

Blacklist and My Device Portal

Which statement about hot-spot guest access in a corporate environment that provides BYOD access for employees is true?

A. It uses TACACS+ to support user guest credential.
B. The BYOD portal must be configured on a separate SSID from the guest hotspot.
C. It uses WPA authentication, which allows it to provide connectivity to more device types.
D. Traffic to the employees BYOD portal must be directed to different WLC than guest traffic.

Answer: B

A security engineer Is deploying Cisco ISE. Which feature must the engineer node settings to enable guest services?

A. Profiling services
B. Session serevvices
C. Monitoring services
D. pxGrid services

A security engineer Is deploying Cisco ISE. Which feature must the engineer node settings to enable guest services?

A. Profiling services
B. Session serevvices
C. Monitoring services
D. pxGrid services
================
Answer: A

Sorry correct answer is B

@Demus,

I’m done.

Formatting of command sets that needs to be imported
Closed mode – EAPol, STP,CDP
Usual D&D
Usual Scenerio Qs. – VLAN 10
New Qs – SNMPQuery
When in doubt, the answer is Session service, if the question itself contains “session services”, then the answer is Posture . :-D
Trustsec – Dynamic vs Static
Why AD
MSChapv2 , EAP-FAST
What PP and Demus and SP posted.

www dot dropbox dot com/s/1if5ttz1p1kxi21/300-208.docx?dl=0

@Dave, Thanks!

Would you say that that ms-doc would be sufficient to nail the exam? no other sources required?

Given that I have gone through the nuggets, student guide and am currently reading the official cert guide + have real world hands on.

Also, has anyone taken the exam recently that can verify if SP’s doc(share on the previous page) with +-55q is still relevant?

I’ll be writing my exam next week, so can only feedback after then.

Which action do you take to restrict network access for endpoints that are not posture compliant?
A. Configure a dACL on the NAD.
B. Configure client provisioning services on the Cisco ISE Server
C. Assign a dynamic VLAN on the NAD.
D. Define the policy by configuring a standard profile.

?????

@Dave, Thanks!!!

@PP

Which action do you take to restrict network access for endpoints that are not posture compliant?
A. Configure a dACL on the NAD.
B. Configure client provisioning services on the Cisco ISE Server
C. Assign a dynamic VLAN on the NAD.
D. Define the policy by configuring a standard profile.
———————
Answer: B in my opinion

@PP

Which action do you take to restrict network access for endpoints that are not posture compliant?
A. Configure a dACL on the NAD.
B. Configure client provisioning services on the Cisco ISE Server
C. Assign a dynamic VLAN on the NAD.
D. Define the policy by configuring a standard profile.
———————

My Answer: A – Posture has already taken place and the status changed to non-compliant. AuthZ policy for the new state can implement a dACL which will provide remediation access.

dear all
please want to know right answer for this question :
QUESTION 431
How are Cisco ISE guest services enabled?
A. By using the Cisco ISE admin portal
B. By configuring a NAD
C. By installing NAC Agents
D. By the WebAuth functionality
I think A but dump answer is D??!!

also need right answer for this Q:
question 509:
which matching model does cisco ise use to process commands in a command set?
A. wildcard matching model
B. case sensitive matching model
C. regular expression matching model
D. literal matching model

QUESTION 182 (suite)
Determine which can be two reasons why many users like the Sales and IT users are not able to authenticate and access the network using their AnyConnect NAM client with EAP-FAST? (Choose two.)

A. The Dot1X authentication policy is not allowing the EAP-FAST protocol.
B. The IP_Corp authorization profile has the wrong Access Type configured.
C. The authorization profile used for the Sales users is misconfigured.
D. The order for the MAB authentication policy and the Dot1X authentication policy should be reversed.
E. Many of the IT Sales and IT user machines are not passing the ISE posture assessment.
F. The PERMIT_ALL_TRAFFIC DACL is missing the permit ip any any statement it the end.
G. The Employee_FullAccess_DACL DACL is missing the permit ip any any statement in the end.

Answer: AD

Which statement is true?

A. Currently, IT users who successfully authenticate will have their packets tagged with SGT of 3.
B. Currently, IT users who successfully authenticate will be assigned to VLAN 9.
C. Currently, any domain administrator who successfully authenticate will be assigned to VLAN 10.
D. Computers belonging to the secure-x domain which passes machine authentication but failed user authentication will have the Employee_Restricted_DACL applied.
E. Print Servers matching the Linksys-PrintServer identity group will have the following access restrictions:

permit icmp any host 10.10.2.20
permit tcp any host 10.10.2.20 eq 80
permit icmp any host 10.10.3.20
permit tcp any host 10.10.3.20 eq 80
deny ip any any

Answer: C

183.

Which two of the following statements are correct? (Choose two.)
The ISE is not able to successfully connect to the hq-srv.secure-x. local AD server.
The ISE internal endpoints database is used authenticate any users not in the Active Directory domain.
The ISE internal user database has two accounts enabled: student and test that maps to the Employee user identity group.
Guest_Portal_Sequence is a built-in identity source sequence.
Answer: BD

Can you please Confirm

Which personal device portal support ISE:
blacklist
My device portal
end-user
whitelist
Hotspot-GUEST

Blacklist and My Device Portal

Please confirm

@louly

By using the Cisco ISE admin portal

Which statement is true?

A. Currently, IT users who successfully authenticate will have their packets tagged with SGT of 3.
B. Currently, IT users who successfully authenticate will be assigned to VLAN 9.
C. Currently, any domain administrator who successfully authenticate will be assigned to VLAN 10.
D. Computers belonging to the secure-x domain which passes machine authentication but failed user authentication will have the Employee_Restricted_DACL applied.
E. Print Servers matching the Linksys-PrintServer identity group will have the following access restrictions:

permit icmp any host 10.10.2.20
permit tcp any dshost 10.10.2.20 eq 80
permit icmp any host 10.10.3.20
permit tcp any host 10.10.3.20 eq 80
deny ip any any

Answer: C

@PP
Confirmed: Blacklist and My Device Portal

question 509:
which matching model does cisco ise use to process commands in a command set?
A. wildcard matching model
B. case sensitive matching model
C. regular expression matching model
D. literal matching model

A –> It matches the command in the request with the commands specified in the command set list using the wildcard matching paradigm

cisco*com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010*html

QUESTION 406
Which two statements are true when redirecting traffic to the client provisioning portal? (Choose two.)
A. Endpoint redirection to the client provisioning portal must solely be configured on the Cisco ISE.
B. The redirect ACL configured on the switch is referenced by an authorization policy rule.
C. A redirect ACL on the switch will typically deny basic services.
D. The ACL name defined on the ISE must match the local ACL defined on the switch.

want to confirm the answers??

question 514:
refer to the exhibit. you must configure the switch t accept downloadable ACLs from a cisco ISE server. which 2 command do you run to complete the configuration? (choose 2)
” switch(config)# aaa new-model
switch(config)# aaa authorization network default local group radius ”

A. radius-server attribute 8 include in access req
B. radius server vsa send authentication
C. dot1x system-auth-control
D. ip device tracking
E. aaa authentication dot1x default group radius

dump answer :BD but I think BC
please confirm right answer??!!

@louly

“ip device tracking” is mandatory for DACL

D is correct answer

@Iouly

The answer is B and D which PL do you have and study?
If is the latest can you please share with us?

Which statement is true?

A. Currently, IT users who successfully authenticate will have their packets tagged with SGT of 3.
B. Currently, IT users who successfully authenticate will be assigned to VLAN 9.
C. Currently, any domain administrator who successfully authenticate will be assigned to VLAN 10.
D. Computers belonging to the secure-x domain which passes machine authentication but failed user authentication will have the Employee_Restricted_DACL applied.
E. Print Servers matching the Linksys-PrintServer identity group will have the following access restrictions:

permit icmp any host 10.10.2.20
permit tcp any dshost 10.10.2.20 eq 80
permit icmp any host 10.10.3.20
permit tcp any host 10.10.3.20 eq 80
deny ip any any

Answer: some say C some say D is the answer

@pp
I studied from the last files shared i downloaded from last pages here
If u want ca reshare it

https://www.dropbox.com/sh/j4g42uhznf3p5rx/AADk_bwcgG0kGHNKHK2WjFCKa?dl=0

@louly thanks when you will take the exam?

@pp
Till now i planned to take it 1st of February

Anyone passed recently 300-208 ?

Hola!

The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):

[Get the download link at the end of this post]

NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)

A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices

Answer: BC

NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)

A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses

Answer: AC

NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)

A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field

Answer: BD

NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)

A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.

Answer: CE

NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)

A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP

Answer: CE

NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?

A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.

Answer: D

NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)

A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.

Answer: CD

NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?

A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.

Answer: D

NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?

A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.

Answer: C

NEW QUESTION 501
……

P.S.

PassLeader 300-206 dumps FYI:

od.lk/fl/NjFfMTUyNjc0M18

(501q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

BTW:

1. PassLeader 300-208 dumps FYI:

od.lk/fl/NjFfMTUyNjc0NV8

(521q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-209 dumps FYI:

od.lk/fl/NjFfMTUyNjc0N18

(459q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-210 dumps FYI:

od.lk/fl/NjFfMTUyNjc0OV8

(508q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Select the features that apply to the TACACS protocol. (Choose two.)
A. It only protects the actual credentials
B. It is primarily used for authenticating devices and users across a network access device
C. It carries authentication and authorization results in one message
D. It uses TCP instead of UDP
I think answer is : BD
please confirm??!!

Which action do you take to restrict network access for endpoints that are not posture compliant?
A. Configure a dACL on the NAD.
B. Configure client provisioning services on the Cisco ISE Server
C. Assign a dynamic VLAN on the NAD.
D. Define the policy by configuring a standard profile.

R: D

which matching model does cisco ise use to process commands in a command set?
A. wildcard matching model
B. case sensitive matching model
C. regular expression matching model
D. literal matching model

R: A

Which personal device portal support ISE:
blacklist
My device portal
end-user
whitelist
Hotspot-GUEST

R: AB

Which two statements are true when redirecting traffic to the client provisioning portal? (Choose two.)
A. Endpoint redirection to the client provisioning portal must solely be configured on the Cisco ISE.
B. The redirect ACL configured on the switch is referenced by an authorization policy rule.
C. A redirect ACL on the switch will typically deny basic services.
D. The ACL name defined on the ISE must match the local ACL defined on the switch.

R: is new for me, but in other coments tell AD

refer to the exhibit. you must configure the switch t accept downloadable ACLs from a cisco ISE server. which 2 command do you run to complete the configuration? (choose 2)
” switch(config)# aaa new-model
switch(config)# aaa authorization network default local group radius ”

A. radius-server attribute 8 include in access req
B. radius server vsa send authentication
C. dot1x system-auth-control
D. ip device tracking
E. aaa authentication dot1x default group radius

R:CE

Select the features that apply to the TACACS protocol. (Choose two.)
A. It only protects the actual credentials
B. It is primarily used for authenticating devices and users across a network access device
C. It carries authentication and authorization results in one message
D. It uses TCP instead of UDP

R: it is new for me

@Anonymous

which matching model does cisco ise use to process commands in a command set?
A. wildcard matching model
B. case sensitive matching model
C. regular expression matching model
D. literal matching model

R: A Correct

Which personal device portal support ISE:
blacklist
My device portal
end-user
whitelist
Hotspot-GUEST

R: AB correct

Which two statements are true when redirecting traffic to the client provisioning portal? (Choose two.)
A. Endpoint redirection to the client provisioning portal must solely be configured on the Cisco ISE.
B. The redirect ACL configured on the switch is referenced by an authorization policy rule.
C. A redirect ACL on the switch will typically deny basic services.
D. The ACL name defined on the ISE must match the local ACL defined on the switch.

R: is new for me, but in other coments tell AD for me CD

refer to the exhibit. you must configure the switch t accept downloadable ACLs from a cisco ISE server. which 2 command do you run to complete the configuration? (choose 2)
” switch(config)# aaa new-model
switch(config)# aaa authorization network default local group radius ”

A. radius-server attribute 8 include in access req
B. radius server vsa send authentication
C. dot1x system-auth-control
D. ip device tracking
E. aaa authentication dot1x default group radius

R:CE for me BD

Select the features that apply to the TACACS protocol. (Choose two.)
A. It only protects the actual credentials
B. It is primarily used for authenticating devices and users across a network access device
C. It carries authentication and authorization results in one message
D. It uses TCP instead of UDP

R: it is new for me BD correct

In which scenario might it be helpful to adjust the network transition delay timer?

A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation

Ciscos says: It may require a longer delay time when clients need time to get a new VLAN IP address during success and failure of posture.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_010111.html

So…C is correct??

SNMPQUERY
Answer. System
Interface

I do the exam and i pass! i confirm you it is the correct answer:

In which scenario might it be helpful to adjust the network transition delay timer?

A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediationç

R: A

refer to the exhibit. you must configure the switch t accept downloadable ACLs from a cisco ISE server. which 2 command do you run to complete the configuration? (choose 2)
” switch(config)# aaa new-model
switch(config)# aaa authorization network default local group radius ”

A. radius-server attribute 8 include in access req
B. radius server vsa send authentication
C. dot1x system-auth-control
D. ip device tracking
E. aaa authentication dot1x default group radius

R: CE

Answer :A
Please confirm
Which interface-level command is needed to turn on dot1x authentication?
A. authentication pae authenticator
B. aaa server radius dynamic-author
C. authentication host-mode single-host
D. dot1x system-auth-control

Please confirm answer :A
Which interface-level command is needed to turn on dot1x authentication?
A. authentication pae authenticator
B. aaa server radius dynamic-author
C. authentication host-mode single-host
D. dot1x system-auth-control

Which interface-level command is needed to turn on dot1x authentication?
A. authentication pae authenticator
B. aaa server radius dynamic-author
C. authentication host-mode single-host
D. dot1x system-auth-control

Correct is D

Hello Everyone,

did anybody take this exam recently, could you please share your experience here please ….

i’m taking my exam next week so your valuable inputs can be very crucial.

QUESTION 221
Which two options enable security group tags to the assigned to a session? (Choose two.)

A. Firewall
B. DHCP
C. ACL
D. Source VLAN
E. ISE

can someone confirm the ans please ?

QUESTION 225
Which two are best practices to implement profiling services in a distributed environment? (Choose two.)

A. use of device sensor feature
B. configuration to send syslogs to the appropriate profiler node
C. netflow probes enabled on central nodes
D. node-specific probe configuration
E. global enablement of the profiler service

Please can someone confirm the answer ?

Which interface-level command is needed to turn on dot1x authentication?
A. authentication pae authenticator
B. aaa server radius dynamic-author
C. authentication host-mode single-host
D. dot1x system-auth-control

D is NOT Correct. It is not a interface-level command. It is a global command
A is NOT Correct. This command does not exist. The command will be “dot1x pae authenticator”
B is NOT Correct. It is not a interface-level command. It is a global command
so….only C may be correct, but it is an optional command (not needed to turn on dot1x authentication)

Done,

Couple of new questions,( as i remember was 5) but DOCX (513Q)almost covered the good 85%

4MCQ + 3MCQ
DND : Blackmail
No other Lab.

:) Thanks guys. Looking towards to do the Cisco Sec Core exam.
Keep studying!

hello, can someone please share the docx (513q)?

@Kajcsu: Thanks for the update mate much appreciated !!

@Kajcsu: do you remember any new questions from the exam ?

QUESTION 322
Which characteristic of an SGT enforcement policy is true?

A. An SGFW has an implicit permit at the beginning.
B. An SGFW has an implicit deny at the end.
C. An SGACL has an implicit deny at the end.
D. An SGACL has an explicit deny at the beginning.

Answer: B

i think the answer is C, can anyone comment on this please

@AG: remove the star and download

https:/**/www*.dropbox.com/s/1if5ttz1p1kxi21/300-208.docx?dl=0

Wild_Wolf IS FAKE FAKE FAKE

Wild_Wolf IS FAKE FAKE FAKE ..

In which scenario might it be helpful to adjust the network transition delay timer?

A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation

Ciscos says: It may require a longer delay time when clients need time to get a new VLAN IP address during success and failure of posture.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_010111.html

So…C is correct??

AnonymousJanuary 31st, 2020
SNMPQUERY
Answer. System
Interface

AnonymousJanuary 31st, 2020
I do the exam and i pass! i confirm you it is the correct answer:

In which scenario might it be helpful to adjust the network transition delay timer?

A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediationç

R: A

refer to the exhibit. you must configure the switch t accept downloadable ACLs from a cisco ISE server. which 2 command do you run to complete the configuration? (choose 2)
” switch(config)# aaa new-model
switch(config)# aaa authorization network default local group radius ”

A. radius-server attribute 8 include in access req
B. radius servweer vsa send authentication
C. dot1x system-auth-control
D. ip device tracking
E. aaa authentication dot1x default group radius

R: CE

QUESTION 322
Which characteristic of an SGT enforcement policy is true?

A. An SGFW has dwan implicit permit at the beginning.
B. An SGFW has an implicit deny at the end.
C. An SGACL has an implicit deny at the end.
D. An SGACL has an explicit deny at the beginning.

Answer: B