Share your SECURE Experience

Congratulations!

Passed the 300-208 exam recently!

A lot of new questions in my 300-208 test, old version dumps are not valid enough for passing now.

I mainly learned the PassLeader 300-208 dumps (502q version), stable and valid enough for passing!

Good luck!

By the way:

PassLeader 300-208 dumps FYI:

od.lk/fl/NjFfMTUyNjc0NV8

(502q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

More:

1. PassLeader 300-206 dumps FYI:

od.lk/fl/NjFfMTUyNjc0M18

(486q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-209 dumps FYI:

od.lk/fl/NjFfMTUyNjc0N18

(454q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-210 dumps FYI:

od.lk/fl/NjFfMTUyNjc0OV8

(483q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Hi @sma,

any chance you could share that dump again?
Access seems restricted. Sent you a request.

Greetings – Thanks Kibo

Done taking 300-208 but failed.. damn i want to snap my fingers
Most of the questions are in the old and pl new dumps.. 2 simlet 4Q and 3Q.. 1DD blacklist.. i failed mostly because i just studied 2 days prior to the exam..

When i saw the questions everything is familiar… but i’m confuse what’s the correct answer or i forgot the answer to that question…

@kibo
what is your email kibo

Hi Sma,

could you please share your dump with me?
my email address is {email not allowed},

Thanks Oscar

Hey guys got any dumps for SENSS? please help

Hi sma,
Could you please share access to below id. Have exam in two weeks.
mdjay03@gmaildotcom

Don’t be scared guys everything is in the dumps they provided here.. simlet still the same.. vlan 10 is wrong.. config is wrong because it’s access_reject.. DD is the one with blacklist.. no new question.. 1 only remember only 1 something about cisco =1, =2, =3, =4….

@Thanos can you share the dumps you have prepared for 300-208

Hi @sma

please use ccnp_security at icloud dot com

Thanks a lot – signed up for the exam in three weeks..

Greetings Kibo

so Thanos saying on 2nd of October he failed then next day asking for dumps, then same day saying he passed … he just want us to fail like him :D

Hi sma,

Can you please share your dumps with me?
oscarfourie@gmaildotcom

Thanks Mike

Hello all,

Can someone verify this question?

A user reports that a switch’s RADIUS accounting packets are not being seen on the Cisco ISE Server. Which command is the user missing in the switch’s configuration?

A. radius-server vsa send accounting
B. aaa accounting network default start-stop group radius
C. aaa accounting resource default start-stop group radius
D. aaa accounting exec default start-stop group radius

Answer:A

But I think it should be B, that do you guys think?

@Ruff
Answer is A
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html#wp1050265

The Cisco ISE network enforcement device (switch) is missing the radius-server vsa send accounting command.

Md,

Thanks!!

Any idea about this one?

Which 802.1x command is needed for ACL to be applied on a switch port?

A. dot1x system-auth-control
B. dot1x pae authenticator
C. authentication port-control auto
D. radius-server vsa send authentication
E. aaa authorization network default group radius

Answer: D

But I think it is E as I remember from watching cbt nuggets that E was the command to allow DACL’s to be pushed on to the switch or even assign vlan to the port I just don’t know whether it would be considered a “802.1x” command. What do you think?

@sma can you please allow me access to dumps as well? my email is mfarshad03@gmaildotcom

@sma can you please allow me access to dumps as well ?

@Ruff,
Me too think answer would be E

@Md

Thanks!!!

hi guys

good luck all !!!

https*:/*/drive.google.com/drive/folders/1weEjtPuloxFpAImnbTXAHrIuEawLEGIs

Hi sma

I requested the access to the drive. Can you please grant it.

Passed the exam!!! Got 9xx

Both questions I asked were in the exam. Also, the question about what came before MAB, which is VMPS. Got around 10 new questions.

Got 2 D & D , 2 Simlet with questions, 60 questions, no Lab.

Thanks to Md and everyone in here contributing.

Good luck to everyone!!!

oh two more questions I remember:

What is the Radius attribute for timer?

Answer I think it is RADIUS Session-Timeout attribute

How do you enable tacacs in ISE?

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200208-Configure-ISE-2-0-IOS-TACACS-Authentic.html

See ya!

Hi Ruff,

Congrats. Could you please share the new question dump if you have. What are the 2 sims you have got in exam.

I can’t quite remember the new ones but some of them were about BYOD and one of them was about guest SSID if it uses the same SSID.

A couple of more questions

5.What is the matching model used in ISE command set in command(choose only one!)

I chose wildcard matching model but it also be regular expression matching model

What are the advantages of using single SSID?（choose two）
A. better security connect experience
B. It’s the best option for BYOD deplyments
C. better for user already configured 802.1x on another network before
D. It’s the best option for IOS devices

I chose C & D

Given command “aaa accounting update newinfo periodic 30”

I chose: update new info from the past 30min

Simlet 1:

Which four statements are correct regarding the event that occurred at 2014-05-07 00:19:07.004? (Choose four.)
A.The IT_Corp authorization profile were applied.
B.The it1 user was matched to the IT_Corp authorization policy.
C.The it1 user supplicant used the PEAP (EAP-MSCHAPv2) authentication method.
D.The it1 user was authenticated using MAB.
E.The it1 user was successfully authenticated against AD1 identity store.
F.The it1 user machine has been profiled as a Microsoft-Workstation.
G.The it1 user machine has passed all the posture assessement tests.

my answer: ACEF

Which three statements are correct regarding the events with the 20 repeat count that occurred at 2014-05-07 00:22:48.748? (Choose three.)
A.The device was successfully authenticated using MAB.
B.The device matched the Machine_Corp authorization policy.
C.The Print Servers authorization profile were applied.
D.The device was profiled as a Linksys-PrintServer.
E.The device MAC address is 00:14:BF:70:B5:FB.
F.The device is connected to the Gi0/1 switch port and the switch IP address is 10.10.2.2.

my answer: ADE

Which two statements are correct regarding the event that occurred at 2014-05-07 00:22:48.175? (Choose two.)
A.The DACL will permit http traffic from any host to 10.10.2.20
B.The DACL will permit http traffic from any host to 10.10.3.20
C.The DACL will permit icmp traffic from any host to 10.10.2.20
D.The DACL will permit icmp traffic from any host to 10.10.3.20
E.The DACL will permit https traffic from any host to 10.10.3.20
my answer: AE

Which two statements are correct regarding the event that occurred at 2014-05-07 00:16:55.393? (Choose two.)
A.The failure reason was user entered the wrong username.
B.The supplicant used the PAP authentication method.
C.The username entered was it1.
D.The user was authenticated against the Active Directory then also against the ISE interal user database and both fails.
E.The NAS switch port where the user connected to has a MAC address of 44:03:A7:62:41:7F
F.The user is being authenticated using 802.1X.
G.The user failed the MAB.
H.The supplicant stopped responding to ISE which caused the failure.

my answer: CF

Simlet 2:

Determine which can be two reasons why many users like the Sales and fT users are not able to authenticate and access the network using their
AnyConnect NAM client with EAP-FAST.(Choose two.)
A.The DotlX authentication policy is not allowing the EAP-FAST protocol.
B.The rr_Corp authorization profile has the wrong Access Type configured.
C.The authorization profile used for the Sales users is misconfigured. (authrization profile says Reject,hence Sales cann’t access network)
D.The order for the MAB authentication policy and the DotlX authentication policy should be reversed.
E.Many of the fT Sales and fT user machines are not passing the ISE posture accessment.
F.the PERMrr_ALL_TRAFFIC DACL is missing the permit ip any any statement it the end.
G.The Employee_FullAccess_DACL DACL is missing the permit ip any any statement in the end.
my answer: AC

Which two of the following statements are correct? (Choose two.)
A.The ISE is not able to successfully connect to the hq-srv.secure-x. local AD server.
B.The ISE internal endpoints database is used authenticate any users not in the Active Directory domain.
C.The ISE internal user database has two accounts enabled: student and test that maps to the Employee user identity group.
D.Guest_Portal_Sequence is a built-in identity source sequence.

my answer: CD

Which of the following statement is correct?
A.Currently,IT users who successfully authenticate will have their packets tagged withaSGTof3.
B.Currently,ITusers who successfully authenticate will be assigned to VLAN 9.
C.Currently, any domain administrator who successfully authenticate will be assigned to VLAN 10.
D.Computers belonging to the secure-x domain which passes machine authentication but failed user authentication will have the
Employee_Restricted_DACL applied.
E.Print Servers matching the Linksys-PrintServer identity group will have the following access restrictions:permit icmp any host 10.10.2.20
permit tcp any host 10.10.2.20 eq 80 permit icmp any host 10.10.3.20 permit tcp any host 10.10.3.20 eq 80 deny ip any any

my answer: D

See ya, I’m out!

Passed today with score 88X , same like everyone says, studied from Gio and PL 451, i got 2 simlet 4Q and 3Q.. 1DD blacklist, no lab, 5-10 new questions, most of them as Ruff said above

Hey Fedz

I am taking my exam soon. Can you share the dump files please at coolcoolguy93 at gmail.com

@Fedz, do you remember if your answers were same as Ruff?

Passed exam with 9xx. Thanks all.
got 2 simlet 4Q and 3Q, 1DD blacklist, no lab

HEllo all ,

I am going to start study for 300-208 exam . There is 502 Q . I have not more time for studying . I would like to ask you if last 200 q (300 – 502 ) are enough for passing or I must study all 502 q for passing .
Thank you for advice

Regards BJ

BJ you must go through all . Do you have the 502 questions can you share ? I have the 451.

@BJ and clint I am also having 451 only….can you share 501???

Anybody with VCE player? Please share, please

Any vce or ete?

Hello ,

here is link for download dump.
https://od.lk/f/NzBfMTA1ODM2OTZf

Kindly pls. share info after exam what type of questions are valid for passing exam . I presumes that last 200q are enough for passing exam + 2 Simlet and D&D .

good luck

Please share VCE Player, please.

Thanks a lot @BJ – my exam is approaching fast :)
2 weeks to go :) I will report back how it went

Does anyone have the VCE as well?

Greetings Kibo

Congratulations!

Passed the 300-208 exam recently!

A lot of new questions in my 300-208 test, old version dumps are not valid enough for passing now.

I mainly learned the PassLeader 300-208 dumps (502q version), stable and valid enough for passing!

Good luck!

By the way:

PassLeader 300-208 dumps FYI:

od.lk/fl/NjFfMTUyNjc0NV8

(502q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

More:

1. PassLeader 300-206 dumps FYI:

od.lk/fl/NjFfMTUyNjc0M18

(486q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-209 dumps FYI:

od.lk/fl/NjFfMTUyNjc0N18

(454q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-210 dumps FYI:

od.lk/fl/NjFfMTUyNjc0OV8

(502q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

It seems like the 501q has a lot of duplicates, anyway someone can make a version without the dups?

Thanks BJ taking the exam soon will provid the feedback.

Today I have done my test..

Exam Very easy all questions in Dumps

not difficult at all, do not worry!

Without 2 star**
https:/*/1click*urls.com/nYGUbfo

Which two of the following statements are correct? (Choose two.)
A.The ISE is not able to successfully connect to the hq-srv.secure-x. local AD server.
B.The ISE internal endpoints database is used authenticate any users not in the Active Directory domain.
C.The ISE internal user database has two accounts enabled: student and test that maps to the Employee user identity group.
D.Guest_Portal_Sequence is a built-in identity source sequence.

my answer: CD

Hi guys.
Regarding this question:
Which internal Cisco ISE component reduces demand on JVM memory by limiting the number of devices the profiler handles?
A. eventHandlerQueueSize
B. maxEndPointsLocalDb
C. NetworkDeviceEventHandler
D. forwarderQueueSize

Some dumps say it’s A and some say it’s B.
According to this it sounds like B is correct.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html

Do you agree?

What is the purpose of configuring Native Supplicant Profile on the Cisco ISE?
A. It provides posture assessments and remediation for devices that are attempting to gain access to the corporate network
B. It is used to register personal devices on the network.
C. It enforces the use of MSCHAPv2 or EAP-TLS for 802 1X authentication
D. It helps employees add and manage new devices by entering the MAC address for the device.
Answer:
B
Which option describes the purpose of configuring Native Supplicant Profile on the Cisco ISE?
A. It helps employees add and manage new devices by entering the MAC address for the device.
B. It is used to register personal devices on the network.
C. It enforces the use of MSCHAPv2 or EAP-TLS for 802.1X authentication.
D. It provides posture assessments and remediation for devices that are attempting to gain access to the corporate network.
Answer:
C

Hello everyone.
Sorry I have my exam next week and I have questions with some questions I hope you can support me. I would thank you a lot.

A company wants to allow employees to register and manage their own devices that do not support NSP. Which portals enable this ability?
A. MDM portals
B. Client provisioning portals
C. My devices portals
D. BYOD Portals

Answer:
A

Which two options enable security group tags to the assigned to a session?

A. Firewall
B. DHCP
C. ACL
D. Source VLAN
E. ISE

Answer:
A, E

Which interface-level command is needed to turn on dot1x authentication?
A. authentication pae authenticator
B. aaa server radius dynamic-author
C. authentication host-mode single-host
D. dot1x system-auth-control

Answer:
A, E

An engineer must ensure that all client operating systems have the AnyConnect Agent for an upcoming posture implementation. Which two versions of OS does the AnyConnect posture agent support? (Choose two.)Google Android

A. B. Ubuntu
B. Apple Mac OS X
C. Microsoft Windows
D. Red Hat Enterprise Linux
Answer:
D, E

How does the device sensor send information to a RADIUS server?
A. Accounting
B. Authorization
C. Analyzer
D. Collector

Answer:
D, E

An engineer of company A will be sending guest credentials through SMS to conference participants. Which portal must be used to create them?

A. SMS
B. Sponsor
C. Guest
D. User
Answer:
A

Which definition of “posturing” as it relates to a general network infrastructure and access into the internal network is true?
A. The process by which an operating system or application running on an endpoint provides critical information about internet activity being used by the endpoint.
B. The process by which an endpoint device can be monitored while connected to the network to determine if it could contain viruses or potential harmful programs running.
C. The process by which an operating system or application running on an endpoint provides critical information about the software that is actively running on the device.
D. The process when software is uploaded to an end device before it is allowed to gain access to a secure network.

Answer:
D

What protecs MacSec Frame ?
A. ICV
B. MKA

Answer:
B

Which packets are allowed on a dot1x port with no authentication open before the port goes to an authorized state?
A. DHCP, EAPOL, HTTP
B. CDP, EAPOL, STP
C. CDP, DHCP, DNS
D. CDP, EAPOL, HTTP
Answer:
A

An engineer has implemented 802. 1X on a cisco 2960x switch with this port configuration:
When a non-managed network switch is connected 802. 1x fails which reason for this failure is true?
A. The mab command is missing.
B. The authentication host-mode multi-auth command is miss
C. EAPOL frames are not being forwarded
D. BPDU frames are not being sent.
E. The authentication host-mode multi-host command is miss.

Answer:
F

Which guest service requires session services to be enabled on a cisco ISE node?
A. administration service
B. monitoring service
C. posture service
D. profiling service

Answer:
A

Which type of a sensor requires an embedded data collector in the switch to support profiling?
A. DHCP sensor
B. CDP sensor
C. IOS sensor
D. LLDP sensor

Answer:
A

Which client interface or interfaces are provisioned when the Cisco ISE performs supplicant provisioning?

A. wireless and wired interface
B. wireless interface
C. active interfaces
D. wired interface

Answer:
A

Which advantage is provided by using Active Directory as an external identity source?
A. It supports SAML for single sign-on.
B. It uses EAP chaining with EAP-FAST to authenticate users and computers.
C. It supports two factor-authentication using a PIN and a token.
D. It uses EAP chaining with EAP-TLS to authentication users and computers.

Answer:
A

What are the two values Cisco recommends that you configure and test when deploying MAB 802.1x? (Choose two.)
A. supp-timeout
B. server-timeout
C. max-req
D. max-reauth-req
E. tx-period

Answer:
B, D

What two values does Cisco recommend you adjust and test to set the optimal timeout value for your network’s specific 802.1X MAB deployment?
A. Max-reath-req
B. Supp-timeout
C. Max-req
D. Tx-period
E. Server-timeout
Answer:
A, D

I hope you can support me with these questions, I took the exam and I failed it, I remember that many of these questions came on the exam. I would appreciate your help since next week I will do it again 300-208.

Sorry Anonymous labs, labs of 300-208 are as they have put exam soon and you?

What is the purpose of configuring Native Supplicant Profile on the Cisco ISE?
A. It provides posture assessments and remediation for devices that are attempting to gain access to the corporate network
B. It is used to register personal devices on the network.
C. It enforces the use of MSCHAPv2 or EAP-TLS for 802 1X authentication
D. It helps employees add and manage new devices by entering the MAC address for the device. answe is c
A company wants to allow employees to register and manage their own devices that do not support NSP. Which portals enable this ability?
A. MDM portals
B. Client provisioning portals
C. My devices portals
D. BYOD Portals ans is c

Today I have done my test..

Exam Very easy all questions in Dumps

not difficult at all, do not worry!

Without 2 star***
https:/*/m*y.su/ghgh

Which advantage is provided by using Active Directory as an external identity source?
A. It supports SAML for single sign-on.
B. It uses EAP chaining with EAP-FAST to authenticate users and computers.
C. It supports two factor-autfwehentication using a PIN and a token.
D. It uses EAP chaining with EAP-TLS to authentication users and computers.

Answer:
A

Hi guys i need 300-210 Dump ahmedalobaidy1atgmail.com
thank you

Congrats!

Passed the 300-208 exam recently!

A lot of new questions in my 300-208 test, old version dumps are not valid enough for passing now.

I mainly learned the PassLeader 300-208 dumps (502q version), stable and valid enough for passing!

Good luck!

By the way:

PassLeader 300-208 dumps FYI:

od.lk/fl/NjFfMTUyNjc0NV8

(502q~~~NEW VERSION DUMPS!!!)

Good Luck!!!

[(copy that link and open it in your web browser!!!)]

More:

1. PassLeader 300-206 dumps FYI:

od.lk/fl/NjFfMTUyNjc0M18

(486q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

2. PassLeader 300-209 dumps FYI:

od.lk/fl/NjFfMTUyNjc0N18

(454q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

3. PassLeader 300-210 dumps FYI:

od.lk/fl/NjFfMTUyNjc0OV8

(502q~~~NEW VERSION DUMPS!!!)

~~~~~~~~~~~~~~~~~~~~~~~~~

Good Luck!!!

[(copy those links and open them in your web browser!!!)]

Bharath Murugesan IS FAKE FAKE FAKE FAKE FAKE FAKE FAKE

%%%%

It is stable now, and it is necessary to take time to test.

h ttps://cciedum ps52.livejournal.com/1308.html

5.What is the matching model used in ISE command set in command(choose only one!)

I chose wildcard matching model but it also be regular expression matching model

What are the advantages of using single SSID?（choose two）
A. better security connect experience
B. It’s the best option for BYOD deplyments
C. better for user already configured 802.1x on another network before
D. It’s the best option for IOS devices

I chose C & D

Given command “aaa accounting update newinfo periodic 30”

I chose: update new info from the past 30min

Simlet 1:

Which four statements are correct regarding the event that occurred at 2014-05-07 00:19:07.004? (Choose four.)
A.The IT_Corp authorization profile were applied.
B.The it1 user was matched to the IT_Corp authorization policy.
C.The it1 user supplicant used the PEAP (EAP-MSCHAPv2) authentication method.
D.The it1 user was authenticated using MAB.
E.The it1 user was successfully authenticated against AD1 identity store.
F.The it1 user machine has been profiled as a Microsoft-Workstation.
G.The it1 user machine has passed all the posture assessement tests.

my answer: ACEF

Which three statements are correct regarding the events with the 20 repeat count that occurred at 2014-05-07 00:22:48.748? (Choose three.)
A.The device was successfully authenticated using MAB.
B.The device matched the Machine_Corp authorization policy.
C.The Print Servers authorization profile were applied.
D.The device was profiled as a Linksys-PrintServer.
E.The device MAC address is 00:14:BF:70:B5:FB.
F.The device is connected to the Gi0/1 switch port and the switch IP address is 10.10.2.2.

my answer: ADE

Which two statements are correct regarding the event that occurred at 2014-05-07 00:22:48.175? (Choose two.)
A.The DACL will permit http traffic from any host to 10.10.2.20
B.The DACL will permit http traffic from any host to 10.10.3.20
C.The DACL will permit icmp traffic from any host to 10.10.2.20
D.The DACL will permit icmp traffic from any host to 10.10.3.20
E.The DACL will permit https traffic from any host to 10.10.3.20
my answer: AE

Which two statements are correct regarding the event that occurred at 2014-05-07 00:16:55.393? (Choose two.)
A.The failure reason was user entered the wrong username.
B.The supplicant used the PAP authentication method.
C.The username entered was it1.
D.The user was authenticated against the Active Directory then also against the ISE interal user database and both fails.
E.The NAS switch port where the user connected to has a MAC address of 44:03:A7:62:41:7F
F.The user is being authenticated using 802.1X.
G.The user failed the MAB.
H.The supplicant stopped responding to ISE which caused the failure.

my answer: CF

Simlet 2:

Determine which can be two reasons why many users like the Sales and fT users are not able to authenticate and access the network using their
AnyConnect NAM client with EAP-FAST.(Choose two.)
A.The DotlX authentication policy is not allowing the EAP-FAST protocol.
B.The rr_Corp authorization profile has the wrong Access Type configured.
C.The authorization profile used for the Sales users is misconfigured. (authrization profile says Reject,hence Sales cann’t access network)
D.The order for the MAB authentication policy and the DotlX authentication policy should be reversed.
E.Many of the fT Sales and fT user machines are not passing the ISE posture accessment.
F.the PERMrr_ALL_TRAFFIC DACL is missing the permit ip any any statement it the end.
G.The Employee_FullAccess_DACL DACL is missing the permit ip any any statement in the end.
my answer: AC

Which two of the following statements are correct? (Choose two.)
A.The ISE is not able to successfully connect to the hq-srv.secure-x. local AD server.
B.The ISE internal endpoints database is used authenticate any users not in the Active Directory domain.
C.The ISE internal user database has two accounts enabled: student and test that maps to the Employee user identity group.
D.Guest_Portal_Sequence is a built-in identity source sequence.

my answer: CD

Which of the following statement is correct?
A.Currently,IT users who successfully authenticate will have their packets tagged withaSGTof3.
B.Currently,ITusers who successfully authenticate will be assigned to VLAN 9.
C.Currently, any domain administrator who successfully authenticate will be assigned to VLAN 10.
D.Computers belonging to the secure-x domain which passes machine authentication but failed user authentication will have the
Employee_Restricted_DACL applied.
E.Print Servers matching qwethe Linksys-PrintServer identity group will have the following access restrictions:permit icmp any host 10.10.2.20
permit tcp any host 10.10.2.20 eq 80 permit icmp any host 10.10.3.20 permit tcp any host 10.10.3.20 eq 80 deny ip any any

my answer: D

Today I have done my test

Exam Very easy all questions in Dumps

not difficult at all, do not worry!

Without 1 star***
http:/*/psce.pw/LQUU2

Which three statements are true regarding MAB ?

A. The MAC address is sent in a RADIUS Access-REquest message
B. It is commonly configured with network printers
C. It uses certifiasccates in the authentication process
D. It uses EAP to authenticate users
E. It allows exemptions from 802.1X authetication

Took exam and barely passed by like 1 question. There were 10-13 new questions that I didn’t see in any of the dumps. 2 dd, 2 sims (4 question, 3 question ones), no lab. I would suggest studying up on radius attributes.

@ Anonymous

I would go with A, B and E (assuming you are after three answers)

Check here for details on the content of Radius Access Requests.
https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networking-services/config_guide_c17-663759.html

Greetings Kibo

Which advantage is provided by using Active Directory as an external identity source?
A. It supports SAML for single sign-on.
B. It uses EAP chaining with EAP-FAST to authenticate users and computers.
C. It supports two factor-authentication using a PIN and a token.
D. It uses EAP chaining with EAP-TLS to authentication users and computers.

Answer:
B
Some dumps are saying answer is A
Any one who can confirm the right answer ?

@KB

I fully agree – I don’t see why the SAML would be the correct answer.
I would also choose B – makes much more sense to me.

Greetings Kibo

@kibo
Thanks a lot my dear.
I am going to sit for the exam in the mid of November.
Any advice and resources you may provide me?

What is required to implement Monitor Mode in a wireless network?
A – Open authentication must be configured via Cisco WLC CLI
B- Wireless Monitor Mode Policy should be enabled within Cisco ISE
C- Monitor mode in a wireless network is not possible
D- Cisco WLC should have this feature enabled inside the security properties for the WLAN

DUMP ANS IS: C

But I have a doubt because Monitor mode is very much possible in wireless networks. Can anyone please correct me if I am wrong?

https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_21_monitor_mode_deployment_guide.pdf

In which configuration setting is the sequence of identity sources configured?
A. Advanced Search List Setting
B. Authentication Policy
C. Authentication Search List
D. Certificate Based Authentication

Answer : C
I think the Answer is B.
Please help to verify this. Thanks guys.

In which configuration setting is the sequence of identity sources configured?
A. Advanced Search List Setting
B. Authentication Policy
C. Authentication Search List
D. Certificate Based Authentication

Answer : D

Look at this URL:
http://www.network-node.com/blog/2015/12/31/ise-20-byod-policy-configuration

NEW QUESTION 457
Which two control-plane suninterface can be found in IOS_based routers that supports CPPr? (Choose two.)

A. Rate limiting
B. Port filtering
C. Transit
D. Host
E. CoPP

Answer: CD

NEW QUESTION 458
Which two actions can you take to mitigate MAC attacks on Layer2 switches? (Choose two.)

A. Configure the switchport-security violation shutdown command on the truck port.
B. Enable port security to limit the number of MAC addresses on access ports.
C. Configure the switchport port-security violation restrict command on the truck port.
D. Configure dynamic ARP inspection on the access port.
E. Configure dynamic ARP inspection on the access port.
F. Configure static MAC address on the access ports.

Answer: CD

NEW QUESTION 459
Which command must you configure on a Cisco IOS XR or XE device to enable Cisco Prime Infrastructure to perform event-trigger backups?

A. Snamp-server community
B. Logging
C. Logging trap level
D. Snamp-server host

Answer: B

NEW QUESTION 460
Which two user privileges does ASDM allow an engineer to create? (Choose two.)

A. Read-write
B. Full access
C. Admin
D. Ready-only
E. Write-only

Answer: CD

NEW QUESTION 461
Which two tasks must you perform to configure SNMPv3 on the Cisco ASA? (Choose two.)

A. Configure the SNMP listening port.
B. Configure a local use with privilege to use SNMP only.
C. Configure the local user to manage the ASA.
D. Configure a recipient for SNMP notifications.
E. Configure an SNMP group.

Answer: AE

NEW QUESTION 462
Which two statements about the Cisco prime Security Manager are true? (Choose two.)

A. URL filtering is not supported.
B. You can import existing object definitions as the basis of new policy rules.
C. The physical appliance version and the virtual appliance version can be under the same support license.
D. It can use AAA to identify users and handle RBAC.
E. The primary manager handles access requests for all managed devices.

Answer: CE

NEW QUESTION 463
Which two statements about the Cisco Security Control Framework Model are true? (Choose two.)

A. It support IDS and IPS as components of the control objective.
B. It relies on a redundant architecture for the core enterprise infrastructure.
C. It support multiple security actions to provide visibility and control.
D. It focuses on device hardening and network resiliency to enhance service availability.

Answer: CD

NEW QUESTION 464
Which two statements about unified ACLs are true? (Choose two.)

A. They are supported for SSL and IPsec.
B. You can use the ipv6-class command to display the sequence numbers in the ACL.
C. You can use the show running-config access-list command to display the current-list configuration.
D. IPv6 ACE address are defined with wildcard masks instead of CIDR notation.

Answer: AD

NEW QUESTION 465
Which two statements about security context on the ASA are true? (Choose two.)

A. Active/active failover is supported only in multiple context mode.
B. Shared interfaces on an ASA in multiple context mode use different IP addresses to identify the correct context.
C. Shared interfaces on an ASA in multiple context mode use different MAC addresses to identify the correct context.
D. You must use an SSH connections or the Cisco ASDM to access the admin context.
E Interfaces can be assigned to multiple context in transparent mode only.

Answer: AC

NEW QUESTION 466
Drag and Drop
You must configure a Cisco ASA 5500 Series as an NTP client by using authentication. (Drag and drop the configuration steps from the left into the correct order on the right.)
4661

Answer:
4662

NEW QUESTION 467
Which two best practices can mitigate Layer 2 attacks on the network? (Choose two.)

A. Disabling STP on all Layer 2 network switches to mitigate ARP attacks.
B. Configuring dynamic ARP inspection to mitigate ARP attacks.
C. Configuring IP source guard to mitigate CAM and DHCP starvation attacks.
D. Disabling DTP on all user access ports to mitigate VLAN hopping.
E. Configuring port security on the trunk port to mitigate GAM and DHCP starvation attacks.

Answer: DE

NEW QUESTION 468
Which two statements about PVLANs are true? (Choose two.)

A. They carry unidirectional traffic from one or more isolated VLANs downstream to the gateway router.
B. They use VTP to distribute VLAN information across multiple Layer 2 network switches.
C. They are marked with P in the output of the show vlan private-vlan command.
D. When they span multiple Layer 2 switches, they must be configured manually on intermediary switches.
E. They provide Layer 2 segregation, which allows multiple end devices to share the same IP subnet.

Answer: CD

NEW QUESTION 469
Which fact must consider when configure protection for the firewall management plane?

A. If you encrypt management sessions with IPsec, SSH is unnecessary.
B. You can run a dynamic routing processing on the management-only interface and the data interface currently.
C. You can use the management-only command to limit an interface to in-band access only.
D. If the no servicwde password-recovery command is configured and you forget the password, you must factory reset the firewall.

Answer: C

NEW QUESTION 470
Which two features are supported on the Cisco Adaptive security Virtual Appliance? (Choose two.)

A. Clustering
B. Site-to-site
C. High availability
D. Etherchannel
E. PAK-based licensing
F. Multiple contexts

Answer: BC

NEW QUESTION 466

Drag and Drop…..
You must configure a Cisco ASA 5500 Series as an NTP client by using authentication. (Drag and drop the configuration steps from the left into the correct order on the right.)
4661

Answer:
4662

Hello everyone!!!
Pass my test 300-208. I rely on the questions you have put here and passleader.
The labs are correct as they have been shared.

Compilation of the questions that come in the exam and have shared here.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

1) Formatting of command sets that needs to be imported (Choose one)

A.– wildcard matching paradigm (TRUE)
B.– regular expressions (regex) matching paradigm (False, this is for the arguments)
C.– lateral text model

2) TrueSec in Closed mode (Choose two) —-> (I understand that it shouldn’t matter whether is TrustSec or not, it might be set there just to confuse us.)

A.– all users don’t have access
B.– DHCP, DNS permitted —> FALSE (not allowed in closed mode)
C.– EAPOL only —> TRUE (though it is also allowed STP and CDP on the port)
D.– All user traffic is denied prior to authentication—> (TRUE, only EAPOL)

3) How dACL is entered (

A.- ip access-list extended ACL-ALLOW
permit ip any any
B.– ip access-list …..
C.-permit ip any any (This one is true, when creating the dACL you only set the rules not if it is
standard, extended,….)
D.-ip access-list standard
permit ip any

4) aaa accounting network default start-stop group radius
aaa accounting update newinfo periodic 30
(Choose one)
A.– sends periodic interim accounting records to the RADIUS server at 30 minute intervals (TRUE, as per definition)
B.– sends default records at 30 minute intervals
C.– … 30 sessions/ users …

5.- Given command “aaa accounting update newinfo periodic 30”, what is that about

A.– update info from 30 new clients [wrong]
B.– update new info from the past 30min [correct]

6) BYOD for non native supplicants?

A. CPP
Answer: A

7) What command or commands, is used by dacl in ISE? (something like that)

A.- permit ip any any [CORRECT]
B.- ip accesslist extended 209
permit ip any any
C.- ip access-list standard 1
permit ip any any

8)What is the matching model used in ISE command set in command(choose only one!)
A.– wildcard matching model (correct)
B.– regular expression matching model
C.– lateral text model

9) What came before mab
A. VMPS (Vlan Membership Policy Service)

10)what is the use of network transition delay? (something like that)

A.- in posture compliancy [CORRECT]
B.- remediation

11) Private-group-ID 1:10 , Service-type 1:6, Medium-type 1:16, then ask what will be the VLAN number:

A.– 10
B.– 6
C.– 16

12) What are the advantages of using single SSID?（choose two）

A、 better security connect experience
B、It’s the best option for BYOD deplyments （false）
C、better for user already configured 802.1x on another network before（might be correct）
D、It’s the best option for IOS devices（correct）
Explanation/Reference:
https://community.cisco.com/t5/security-documents/ise-byod-dual-vs-single-ssid-onboarding/ta-p/3641422

13) In what scenario need to finetune network trasaction delay?
A.– more time for user to remediate
B.– more time for user to log on the network
C.– more time for use to check compliance some thing like that (I choose this,see explanation below)

Explanation: You can configure the timer for clients to transition from one state to the other state within a specified time using the network transition delay timer, which is required for Change of Authorization (CoA) to complete. It may require a longer delay time when clients need time to get a new VLAN IP address during success and failure of posture. When successfully postured, Cisco ISE allows clients to transition from unknown to compliant mode within the time specified in the network transition delay timer. Upon failure of posture, Cisco ISE allows clients to transition from unknown to noncompliant mode within the time specified in the timer.

14) What is the Radius attribute for timer?
A.-RADIUS Session-Timeout attribute Answer I think it is:

15) RADIUS Attributes
——————-
A.- 1 User-Name, 2 User-Password, 4 NAS-IP Address , 5 NAS-Port

16) Which two statements about Cisco Prime infrastructure are true?
A.It provides BugID information for Cisco IOS devices.
B.It can display diagnostic data from Cisco NAMs.
C.It integrates with APICs_EM to enable Zero Touch Provision on Cisco network devices.
D.It integrates with APIC_EM PKI Service to crete PKI-secured routes with GRE.
E.It provides application visibility with NBAR.
17) Single SSID (advantages) vs Multiple/Dual SSID (Choose two)

A.- Single SSID – better iOS user experience
B.-Single SSID – should be used in BYOD deployment
C.– Dual SSID – better security user experience
D.– Single SSID? – … client already used wired 802.1X on another network
E.-onliy on Single SSID user can veirfy byod certificate.
18)Which 802.1x command is needed for ACL to be applied on a switch port?
A. dot1x system-auth-control
B. dot1x pae authenticator
C. authentication port-control auto
D. radius-server vsa send authentication
E. aaa authorization network default group radius

19) What is the purpose of configuring Native Supplicant Profile on the Cisco ISE?
B. It is used to register personal devices on the network.
C. It enforces the use of MSCHAPv2 or EAP-TLS for 802.1X authentication.

Sorry in which simulator I can guide myself for the 300-206 SENSS test

Zalo, what did answered for 11?

Today I have done my test

Exam Very easy all questions in Dumps

not difficult at all, do not worry!

Without 1 star***
https:*/**/**priv.sh/PWi4BF2

kiki is fake fake fake…. Dont use kiki fake fake fake Dumps

kiki is fake fake fake…. Dont use kiki fake fake fake Dumps

13) In what scenario need to finetune network trasaction delay?
A.– more time for user to remediate
B.– more time for user to log on the network
C.– more time for use to check compliance some thing like that (I choose this,see explanation below)

Explanation: You can configure the timer for clients to transition from one state to the other state within a specified time using the network transition delay timer, which is required for Change of Authorization (CoA) to complete. It may require a longer delay time when clients need time to get a new VLAN IP address during success and failure of posture. When successfully postured, Cisco ISE allows clients to transition from unknown to compliant mode within the time specified in the network transition delay timer. Upon failure of posture, Cisco ISE allows clients to transition from unknown to noncompliant mode within the time specified in the timer.

14) What is the Radius attribute for timer?
A.-RADIUS Session-Timeout attribute Answer I think it is:

15) RADIUS Attributes
——————-
A.- 1 User-Name, 2 User-Password, 4 NAS-IP Address , 5 NAS-Port

16) Which two statements about Cisco Prime infrastructure are true?
A.It provides BugID information for Cisco IOS devices.
B.It can display diagnostiqsc data from Cisco NAMs.
C.It integrates with APICs_EM to enable Zero Touch Provision on Cisco network devices.
D.It integrates with APIC_EM PKI Service to crete PKI-secured routes with GRE.
E.It provides application visibility with NBAR.
17) Single SSID (advantages) vs Multiple/Dual SSID (Choose two)

https:/*/priv.s*h/d9HamP4

Today I have done my test and get 965/1000

Exam Very easy all questions in Dumps

not difficult at all, do not worry!

Without 2 star**
https:/*/1click*urls.com/nYGUbfo

16) Which two statements about Cisco Prime infrastructure are true?
A.It provides BugID information for Cisco IOS devices.
B.It can display diagnostic data from Cisco NAMs.
C.It integrates with APICs_EM to enable Zero Touch Provision on Cisco network devices.
D.It integrates with APIC_EM PKI Service to crete PKI-secured routes with GRE.
E.It provides application visibility with NBAR.
17) Single SSID (advantages) vs Multiple/Dual SSID (Choose two)

A.- Single SSID – better iOS user experience
B.-Single SSID – should be used ins BYOD deployment
C.– Dual SSID – better security user experience
D.– Single SSID? – … client already used wired 802.1X on another network
E.-onliy on Single SSID user can veirfy byod certificate.

Today I have done my test and get 965/1000

Exam Very easy all questions in Dumps

not difficult at all, do not worry!

Remove 1 star***
https:/*/priv.sh/d9HamP4

NEW QUESTION 488
Which technoelogy does the Cisco AMP Spero detection engineer use to identify threats?

A. Dynamic analysis
B. Static analysis
C. Fuzzy shahwes
D. Machine learning

Answer: C

Zalo, what did answered for 11?

+++++++++++++++++++++++++++++++++++++++++++++
11) Private-group-ID 1:10 , Service-type 1:6, Medium-type 1:16, then ask what will be the VLAN number:

A.– 10 …….[CORRECT]
B.– 6
C.– 16