Share your SCOR Experience
February 23rd, 2020
Go to comments
Please share with us your experience to prepare for the new SCOR 350-701 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome! Hope you will find useful information here!
Note: Currently there are no lab sims for this exam, only multiple choice and drag drop questions.
Hello. Can I use 9tut to prepare for my CCNP Scor 350-701 exam or will I need to use another site? I cannot find where to get the same dumps as everone. Thanks
Hello
Please assist on how to sign up for 350-701 membership, thanks
Hi , I know it’s not related but has anyone any idea where to get CISSP ( ISC2 ) valid dumps please ?
@Lisa, after reading the course material for 350-701, i studied the dumps on this site and that was enough to pass the exam.
@Ben any idea on how can I get materials and dumps for 350-701 on this site ?
hi.
Who encountered exam issue today?
The exam did not start unfortunately(
was there anybody who was a test taker today?
Is 102/127 valid? Anyone have idea?
Is 102/127 valid? Anyone have idea???
The dump (127q) is valid, my result was 9xx. The exam has 102 questions.
https:// mega.nz /file/ pNFEgSyS#rl08_u2ePmYoWK502rnVykq45CIwE1X5GHTZsqC8kaA
score: 9xx
any one who can tell me …….is it 127 dump is valid ….and the corrected answers are correct I will take the exam after a week please please please
What provides visibility and awarness into what is currently occurring on the network?
Prime infrastructure?
or
Telemetry?
@micheale the dump is correct, take the test as soon as possible.
The exam does not have any lab questions.
I took the exam yesterday
please can any one tell me the correct answers of the following
QUESTION 1
Which feature requires a network discovery policy on the Cisco Firepower Next Generation Intrusion Prevention
System?
A. security intelligence
B. impact flags
C. health monitoring
D. URL filtering
Refer to the exhibit. Which command was used to generate this output and to show which ports are
authenticating with dot1x or mab?
Case Study Title (Case Study):
A. show authentication registrations
B. show authentication method
C. show dot1x all
D. show authentication sessions
QUESTION 12
Which two conditions are prerequisites for stateful failover for IPsec? (Choose two.)
A. Only the IKE configuration that is set up on the active device must be duplicated on the standby device; the
IPsec configuration is copied automatically.
B. The active and standby devices can run different versions of the Cisco IOS software but must be the same
type of device.
C. The IPsec configuration that is set up on the active device must be duplicated on the standby device.
D. Only the IPsec configuration that is set up on the active device must be duplicated on the standby device;
the IKE configuration is copied automatically.
E. The active and standby devices must run the same version of the Cisco IOS software and must be the
same type of device.
QUESTION 15
Which flaw does an attacker leverage when exploiting SQL injection vulnerabilities?
A. user input validation in a web page or web application
ahmdkhaldd @ certcollection.org
B. Linux and Windows operating systems
C. database
D. web page images
QUESTION 27
What are the two most commonly used authentication factors in multifactor authentication? (Choose two.)
A. biometric factor
B. time factor
C. confidentiality factor
D. knowledge factor
E. encryption factor
QUESTION 36
An engineer configured a new network identity in Cisco Umbrella but must verify that traffic is being routed
through the Cisco Umbrella network. Which action tests the routing?
A. Ensure that the client computers are pointing to the on-premises DNS servers.
B. Enable the Intelligent Proxy to validate that traffic is being routed correctly.
C. Add the public IP address that the client computers are behind to a Core Identity.
D. Browse to http://welcome.umbrella.com/ to validate that the new identity is working.
QUESTION 41
For which two conditions can an endpoint be checked using ISE posture assessment? (Choose two.)
A. computer identity
B. Windows service
C. user identity
D. Windows firewall
E. default browser
QUESTION 88
What provides visibility and awareness into what is currently occurring on the network?
A. CMX
B. WMI
C. Prime Infrastructure
D. Telemetry
1. B. impact flags
2.D. show authentication sessions
12.C. The IPsec configuration that is set up on the active device must be duplicated on the standby device.
E. The active and standby devices must run the same version of the Cisco IOS software and must be the
same type of device.
15.A. user input validation in a web page or web application
27.B. time factor
D. knowledge factor
36.D. Browse to http://welcome.umbrella.com/ to validate that the new identity is working.
41.B. Windows service
D. Windows firewall
88.D. Telemetry
link for all …can you help me by answering the questions that I have posted ….and can you you tell me which dump have you used ?????????????????
@Micheale
I completed my exam on the 14th but was just viewing comments so here’s my little bit of help
i scored 9xx in my exam
see answers:
A. security intelligence
D.show authentication sessions
B. The active and standby devices can run different versions of the Cisco IOS software but must be the same
type of device.
C. The IPsec configuration that is set up on the active device must be duplicated on the standby device.
C. database
A. biometric factor
D. knowledge factor
B. Enable the Intelligent Proxy to validate that traffic is being routed correctly.
B. Windows service
C. user identity
i sourced material from pass4itsure
Questions: 118
https :// http://www.cisco.com /c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/15-mt/sec-vpn-availability-15-mt-book.pdf
page 34.
DeviceRequirementsStatefulfailoverfor IPsec requiresthat your networkcontainstwo identicalroutersthat are availableto beeither the primaryor secondarydevice.Both routersshouldbe the same type of device,have the same CPUand memory, and have either no encryptionacceleratoror identicalencryptionaccelerators.
This is the link to the official study material for SCOR,
https://mega.nz/file/Ok50ySJL#KOmCUha-4T3w2NB8AYlRvezE5S_26FzRYelf_miRoDk
Passed. All question from 102 dump in mega above
passed …………….can you help me by telling the coorect answers that i have posted above
Passed with 9xx.
102 dump still valid.
The latest version of the dump(version 3) ought to be in page 4 or 5. Read comments carefully.
Taking exam tomm will let all know
Took the examn today, pass 102 dump still valid..
@New Questions
My exam is tomm can send me the dump pleas
Hello all. Just passed this exam w/ score of 9XX. think it would be safe to say that 127Q dump is still valid.thank you all for help and Good luck all.
All passed, yes 102 is still valid . No new questions.
Who is interested in taking the sec lab exam. lets form a study group!
Hello all. Just passed this exam. 127Q dump is still valid.thank you all for help and Good luck all.
please can any one tell me the correct answers of the following
QUESTION 1
Which feature requires a network discovery policy on the Cisco Firepower Next Generation Intrusion Prevention
System?
A. security intelligence
B. impact flags
C. health monitoring
D. URL filtering
Refer to the exhibit. Which command was used to generate this output and to show which ports are
authenticating with dot1x or mab?
Case Study Title (Case Study):
A. show authentication registrations
B. show authentication method
C. show dot1x all
D. show authentication sessions
QUESTION 12
Which two conditions are prerequisites for stateful failover for IPsec? (Choose two.)
A. Only the IKE configuration that is set up on the active device must be duplicated on the standby device; the
IPsec configuration is copied automatically.
B. The active and standby devices can run different versions of the Cisco IOS software but must be the same
type of device.
C. The IPsec configuration that is set up on the active device must be duplicated on the standby device.
D. Only the IPsec configuration that is set up on the active device must be duplicated on the standby device;
the IKE configuration is copied automatically.
E. The active and standby devices must run the same version of the Cisco IOS software and must be the
same type of device.
QUESTION 15
Which flaw does an attacker leverage when exploiting SQL injection vulnerabilities?
A. user input validation in a web page or web application
ahmdkhaldd @ certcollection.org
B. Linux and Windows operating systems
C. database
D. web page images
QUESTION 27
What are the two most commonly used authentication factors in multifactor authentication? (Choose two.)
A. biometric factor
B. time factor
C. confidentiality factor
D. knowledge factor
E. encryption factor
QUESTION 36
An engineer configured a new network identity in Cisco Umbrella but must verify that traffic is being routed
through the Cisco Umbrella network. Which action tests the routing?
A. Ensure that the client computers are pointing to the on-premises DNS servers.
B. Enable the Intelligent Proxy to validate that traffic is being routed correctly.
C. Add the public IP address that the client computers are behind to a Core Identity.
D. Browse to http://welcome.umbrella.com/ to validate that the new identity is working.
QUESTION 41
For which two conditions can an endpoint be checked using ISE posture assessment? (Choose two.)
A. computer identity
B. Windows service
C. user identity
D. Windows firewall
E. default browser
QUESTION 88
What provides visibility and awareness into what is currently occurring on the network?
A. CMX
B. WMI
C. Prime Infrastructure
D. Telemetry
ZHAugust 19th, 2020
1. B. impact flags
2.D. show authentication sessions
12.C. The IPsec configuration that is set up on the active device must be duplicated on the standby device.
E. The active and standby devices must run the same version of the Cisco IOS software and must be the
same type of device.
15.A. user input validation in a web page or web application
27.B. time factor
D. knowledge factor
36.D. Browse to http://welcome.umbrella.com/ to validate that the new identity is working.
41.B. Windows service
D. Windows firewall
88.D. Telemetry
get free ……please can you tell me the dump that you have used for the exam ….which is with correct answer
what can you answered for the questions that I have posted above ……..please please please
Dump 102 is not valid. There were a lot of new questions. I passed with score 853.
@faruk what are the new questions in the exam. do still remember them? please let us know.
faruk …can you remember and post here the new questions please
what about 127 dump …………..have you seen it ???
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
A. unavailable
B. unknown
C. clean
D. disconnected
Answer: A
how many pors can be in one bridge domain in Cisco ASA?
2
4
8
16
8 ports can be in one bridge domain
Faruk? Many new questions?
Exam failed, about 20 or 25 new questions
About how many questions total on the test?
104 total questions
@klaks do still remember the new questions? pls share it to the community
Differences between dmvpn and flexvpn
What are in commom between flexvpn and getvpn
About 5 new questions where they show a configuration output and asks about it, one was a json output
Klaks please can you share t the new questions to the community and which dump have you used ?
Someone please share new queations and answers. 102q/127q are no longer valid anymore
Anyone can share their exam experience with the new answers…thanks in advance!
102q and 127q are no longer valid.
Does anyone has an updated document with new questions???
@Faruk/@Klaks,
So both 102q and 127q are not valid? Anyone took exam rently can confirm if the new dumps aren’t valid anymore?
So both 102q and 127q are not valid? Anyone took exam rently can confirm if the new dumps aren’t valid anymore?
@faruk, can you remember and post here the new questions please?
I’ve been using them for a bit, and started going to bootcamp and was supposed to take it this Thursday. Hopefully this is just a scare tactic.
Yes, I agree, it may just be a scare tactic. unfortunately
I was using both 102pdf and 127q and unfortunately this is not a scare tactic, I failed my exam today early in the morning; dont remember the questions, it was a lot of new information.
I’m looking for new dumps, if I read the questions again I’ll remember if they were in the exam for sure
It makes sense, one of the questions they mentioned above is from the old 300-210 SITCS dump.
I really hope it’s a scare tactic. Let’s wait and see if anyone else would get the same new questions or not.
@klaks, I believe we’ll need to give some days until the community can update the dump as they did before.
Did you see a lot of 127q in the exam today?
@klaks,
Do you remember if the questions mentioned by @faruq was present at your exam?
Did they just add new questions or changed them all?. I have studied 102q and my exam is next week. If they have added new questions, please post the new ones.Please someone respond
Hi guys, I was checking on another SCOR forum and they also mentioned something like 30 new questions in exams from today.
Someone please post new ANSWERS & QUESTIONS
@anon_student yes, all D&Ds and the majority of the questions were from 127q dump, and yes that 2 questions posted by faruq were in my exam.
@anonymous, they add new questions, about 20-25
I will check the 300-210 sitcs dump mentioned by @doubter, and hopefully find some of the new ones added
Does anyone have old CCNP security dumps, like 300-710 exams?
Can someone share a valid Dump?
I barely passed the exam today. 102Q & 127Q is not valid anymore. 50% of the questions are new. I suggest you wait for a valid dumps to come out.
newQuestions ……..can you remember the new questions please
@newQuestions 50%???? how many questions did your exam have? how about the D&D?
I had total 102Qs. Sorry I can’t remember the new questions. some questions are rephrased. same D&D from previous dumps.
New Questions Topics:
FlexVPN vs DMVPN, FTD, NGIPS, AMP, Stealwatch
JSON, API, DNA
command output interpretation
Hi guys, Can you please check if any of the following questions were in new exam questions?????????????
What is a result of enabling Cisco FTD clustering?
A. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
B. Integrated Routing and Bridging is supported on the master unit.
C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
D. All Firepower appliances can support Cisco FTD clustering.
Answer: C
What are the minimum requirements to deploy a managed device inline?
A. inline interfaces, security zones, MTU, and mode
B. passive interface, MTU, and mode
C. inline interfaces, MTU, and mode
D. passive interface, security zone, MTU, and mode
Answer: C
Which Cisco Firepower Threat Defense, which two interface settings are required when configuring a routed interface? (Choose two.)
A. Redundant Interface
B. EtherChannel
C. Speed
D. Media Type
E. Duplex
Answer: CE
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig? (Choose two.)
A. EIGRP
B. OSPF
C. static routing
D. IS-IS
E. BGP
Answer: CE
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
A. Create a custom search in Firepower Management Center and select it in each section of the report.
B. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
C. Add a Table View section to the report with the Search field defined as the network in CIDR format.
D. Select IP Address as the X-Axis in each section of the report.
Answer: B
Which object type supports object overrides?
A. time range
B. security group tag
C. network object
D. DNS server group
Answer: C
Which Cisco Firepower rule action displays an HTTP warning page?
A. Monitor
B. Block
C. Interactive Block
D. Allow with Warning
Answer: C
What is the result of specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an interface?
A. The rate-limiting rule is disabled.
B. Matching traffic is not rate limited.
C. The system rate-limits all traffic.
D. The system repeatedly generates warnings.
Answer: B
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
A. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
B. The system performs intrusion inspection followed by file inspection.
C. They can block traffic based on Security Intelligence data.
D. File policies use an associated variable set to perform intrusion prevention.
E. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
Answer: AC
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for
the Cisco FMC. In which folder should you upload the MIB file?
A. /etc/sf/DCMIB.ALERT
B. /sf/etc/DCEALERT.MIB
C. /etc/sf/DCEALERT.MIB
D. system/etc/DCEALERT.MIB
Answer: C
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
A. configure coredump packet-engine enable
B. capture-traffic
C. capture
D. capture WORD
Answer: B
Which group within Cisco does the Threat Response team use for threat analysis and research?
A. Cisco Deep Analytics
B. OpenDNS Group
C. Cisco Network Response
D. Cisco Talos
Answer: D
Which CLI command is used to generate firewall debug messages on a Cisco Firepower?
A. system support firewall-engine-debug
B. system support ssl-debug
C. system support platform
D. system support dump-table
Answer: A
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high-availability?
A. configure high-availability resume
B. configure high-availability disable
C. system support network-options
D. configure high-availability suspend
Answer: B
Which command must be run to generate troubleshooting files on an FTD?
A. system support view-files
B. sudo sf_troubleshoot.pl
C. system generate-troubleshoot all
D. show tech-support
Answer: B
When do you need the file-size command option during troubleshooting with packet capture?
A. when capture packets are less than 16 MB
B. when capture packets are restricted from the secondary memory
C. when capture packets exceed 10 GB
D. when capture packets exceed 32 MB
Answer: D
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be
validated to allow communication with the cloud service? (Choose two.)
A. outbound port TCP/443
B. inbound port TCP/80
C. outbound port TCP/8080
D. inbound port TCP/443
E. outbound port TCP/80
Answer: AE
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
A. Child domains can view but not edit dashboards that originate from an ancestor domain.
B. Child domains have access to only a limited set of widgets from ancestor domains.
C. Only the administrator of the top ancestor domain can view dashboards.
D. Child domains cannot view dashboards that originate from an ancestor domain.
Answer: D
Which two packet captures does the FTD LINA engine support? (Choose two.)
A. Layer 7 network ID
B. source IP
C. application ID
D. dynamic firewall importing
E. protocol
Answer: BE
Which two features of Cisco AMP for Endpoints allow for an uploaded file to be blocked? (Choose two.)
A. application blocking
B. simple custom detection
C. file repository
D. exclusions
E. application whitelisting
Answer: AB
Which action should you take when Cisco Threat Response notifies you that AMP has identified a file as malware?
A. Add the malicious file to the block list.
B. Send a snapshot to Cisco for technical support.
C. Forward the result of the investigation to an external threat-analysis engine.
D. Wait for Cisco Threat Response to automatically block the malware.
Answer: A
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
A. unavailable
B. unknown
C. clean
D. disconnected
Answer: A
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
A. dynamic null route configured
B. DHCP pool disablement
C. quarantine
D. port shutdown
E. host shutdown
Answer: CD
@klaks can you please confirm if those were the new questions?
@NewQuestions please confirm if the above were the new Questions
only this 2 questions in my exam
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig? (Choose two.)
A. EIGRP
B. OSPF
C. static routing
D. IS-IS
E. BGP
Answer: CE
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
A. unavailable
B. unknown
C. clean
D. disconnected
Answer: A
It seems that the new questions are from the old CCNP Security exams.
Does anyone has the old CCNP dumps?
these new questions appear to be firewall exam 300-710
@Robsosa, where did you get all those questions? Is from a drom a possible new dump?
Estas preguntas fueron posteadas en la web 350-710 el 16 de Julio https://www.securitytut.com/sncf/share-your-sncf-experience/comment-page-2#comments, yo creo que es una tactica de miedo.
@Anon_Student those questions are from old dumps 300-710
Anyone taking the exam on the next days to confirm if there are new questions??
@Anonymous2020 A que te refieres con una tactica miedo?
@HHH The new questions mentioned by a few users might be ‘fake’. Maybe 102q is still valid.
I have heard from one trustable source that he has not received any new updates from new dumps. Probably 102q is still good enough. But I am scared now.
@HHH, How trustable is your source? Maybe we have to wait a little more until he gets it.
Only 2 users took the exam this week, @klaks and @faruk, both confirmed that are new questions.
I’m really confused if this new questions are real, but I’m also not confident in take exam right now.
Any help would be a warm help!
@HHH, @Anon_Student If you don’t believe us who took the exam recently, you should take the exam yourself to see if its true
I recommend you buy premium dumps from trusted source(passleader,braindumps2go,prepaway, etc)maybe they already have the new questions then share it to the community so you can help
@Robsosa none of those questions above appeared in my exam yesterday. Questions are new not recycled questions from old/prev exams. maybe Cisco sense many people are easily passing the SCOR 350-701 exam that’s why they changed it
My source provided me with ccna dumps and I passed.
I am doing my best in order to find the new answers. If someone can help would be highly appriciated.
God bless you all
@NewQuestions, none of those paid dumps have uptades after this monday, when the new questions were added. They are still selling 102q and 127q.
I believe they will need more time.
If someone took the exam this week, please share new questions (if remembered).
my exam is tomorrow, i’m screwed then
@Aminos please do your best to remember questions that were not in the dumps and post them tomorrow
Guys the dumps are still valid, these guys that are saying they are not valid want to sell dump
OK, could anyone please share both 102Q & 127Q dumps?
Thanks for your help
Someone who gave exams ..today or yesterday…? Can he or she confirms about the validity of dumps?
@Keiller, Did you take the exam recently? Or maybe you know someone that did it?
Tks.
@Keiller I don’t give a s.h.t about selling dumps, but I’m done with you people, you keep saying that we are liars, that it is a scare tactic and blah blah blah if you don’t believe me go ahead and take the exam. I’ll continue searching the new questions in other site
klaks please let us know if you find the new answers
Premium dump sites didn’t update questions yet. Let’s wait next few days if someone will take the exam to confirm
Hey @klaks, don’t mind about those guys saying that is a scare tactic. We are all in the same boat here, I’m also trying to find a new valid dump and if I have success, I’ll share here.
Let’s help each other guys!
@SugarOverDrive you are totally right, we are a community to help each other. If anyone find new questions please submit here. Appreciate.
@klaks most of the questions from your exam were in the 127q right? can we study using the available dump?
if anyone is doing the exam this week, please remember to give us a feedback here plsss.
hI EVERYONE,
check this info from Exam4help about 350-701:
EXAM CODE : 350-701
UPDATION DATE : 2020-08-24
TOTAL QUESTIONS : 102
still 102q….no updates yet.
pls send 127q dumps
The exam is still 102q, however, do you think it is possible that they migh have changed 50% (as someone mentioned previusly) of those questions? We really need someone to take the exam and share they experience.
Prepaway last update was Aug 16th