Share your IPS v7.0 Experience
Cisco has made changes for the Security exams by replacing the old CCSP with the new CCNP Security Certification with 4 modules: Secure, Firewall, IPS and VPN. In fact, the old CCSP and the new CCNP Security are very similar. Many candidates have requested us to put up materials for these new exams but it is a time-consuming work. In the mean time, we created the “Share your experience” for the IPS v7.0 exam. We really hope anyone who read securitytut, 9tut, digitaltut, certprepare, networktut and voicetut contribute to these sections as your experience is invaluable for CCNP Security learners to complete their goals.
Please share with us your experience after taking the IPS v7.0 642-627 exam, your materials, the way you learned, your recommendations…
Is there anyone in this group who just passed the exam recently….I heard that a lot of new questions are in the exam which are not reflected in the dumps yet…
hi alink79 – oscar perfect A. access control policy. and Each content filter requires one or more actions ESA
I have doubt with encryption profile for ESA, i insist, think in B-D options, are correct.
NEW QUESTION 488
D
@sma great,
a question about the syntax
Which Cisco IOS command uses the default class map to limit SNMP inspection to traffic from 10.1.1.0 to 192.168.1.0?
A. hostname(config)# access-list inspect extended permit ip 10.1.1.0.0.0.0.255 192.168.1.0.0.0.0.255
hostname(config)# class-map inspection_default hostname(config-cmap)# match access-list inspect
B. hostname(config)# access-list inspect extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
hostname(config-cmap)# match access-list inspect
the answer must be B not A on ASA we dont use wildcard, true ?
does any one have a good brief about the different types of interfaces and deployment? inline, passive, transparent,,,, still i am confused with them
@alihk, above question says IOS, so it will not be asa commands..so wildcard it is…
above question says IOS, asa allow configure application layer protocol inspection.
correct no wilcard in asa
B although it is incomplete
regards.
@sma $ @dot1q so the answer is A ??
Have anyone passed the exam recently? Any takers that could tell us how was the exam?
Hello!
The new PassLeader 300-210 dumps (Updated Recently) now are available, here are part of 300-210 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 473
What are two analysis methods of file inspection on Network-based Cisco advanced malware protection? (Choose two.)
A. xSpero analysis
B. Network analysis
C. User analysis
D. Dynamic analysis
E. Intrusion analysis
Answer: AD
NEW QUESTION 474
Which description of a passive interface on a Cisco Firepower NGFW is true?
A. Receives traffic that is specified on an NGIPS.
B. Inaccessible when disable.
C. Effected by firewall mode.
D. Retransmits received traffic.
Answer: A
NEW QUESTION 475
An engineer is deploying AMP for the first time and cannot afford any interrupted to network traffic. Which policy types does NOT disrupted the network?
A. Protect
B. Server
C. Audit
D. tnage
Answer: C
NEW QUESTION 476
Which Cisco Advanced Malware Protection for Endpoints analysis tool records file activity within a specific host?
A. Device trajectory
B. Prevalence
C. File trajectory
D. File analysis
Answer: A
NEW QUESTION 477
Which two tasks must you perform when impalement CWS on a cisco ASA or ASAV? (Choose two.)
A. Create a new RSA key.
B. Enable the ScanSafe feature.
C. Browse to whoami.scansade.not to verify that web redirection is operating normally.
D. Create an authenticating license key.
E. Define the primary and secondary CWS proxy.
Answer: CD
NEW QUESTION 478
Which two statements about content filters on the Cisco ESA are true? (Choose two.)
A. After you create a content filter, you can create an encryption profile to encrypt messages that match the filter.
B. Each content filter requires one or more actions.
C. They can be applied before a after message filters.
D. They are applied to the message after artisan and antivirus scanning is performed.
E. Each content filter requires one or more conditions
Answer: DE
NEW QUESTION 479
Which two features does Cisco trust Anchor support? (Choose two.)
A. Secure boot
B. Image signing
C. Flood attack detection
D. SYN flood detection
E. DDoS mitigation
Answer: AB
NEW QUESTION 480
For which domain will the Cisco Email Security Appliance allow to 500 recepient per messages?
A. Orange public
B. Violet public and blue public
C. Violet public blue and green public
D. Red public and orange public
E. Red public
F. Violet public
Answer: A
NEW QUESTION 481
Which capacity us exclusive to a Cisco AMP public cloud instance as compared to a private cloud instance?
A. RBAC
B. SPERO
C. TETRA detection engine
D. ETHOS detection engine
Answer: D
NEW QUESTION 482
An engineer is using the reporting feature on a WSA, which option must they consider about the reporting capabilities?
A. Report can be viewed for a particular domain, user, or category.
B. Report must be schedules manually.
C. Report to view system activity over a specified period of time do not exist.
D. Delete reports require a separate license.
Answer: A
NEW QUESTION 483
Which description of the file trajectory feature in Cisco AMP is true?
A. Tracks information about policy updates that affect each file on a network.
B. Excludes information about file transmissions across the network.
C. Blocks the malware detected in a file sent across the network.
D. Display information about the actions performed on each file on a network.
Answer: B
NEW QUESTION 484
A user wants to conire high availability with their Cisco Firepoer deployment, which platform allow for clustering?
A. Virtual NGIPS
B. All platform support clustering
C. Cisco Firepower appliance
D. FirePOWERE Threat Defense for ISR
Answer: C
NEW QUESTION 485
Which cisco CWS traffic-redirection option is most appropriate for roaming users?
A. WSAv connector
B. CWS connector
C. Cisco ASA
D. AnyConnect
Answer: D
NEW QUESTION 486
Which type of Cisco IPS deployment are you using if you are monitoring traffic with a SPAN port?
A. Bypass deployment
B. Tap mode deployment
C. Passive deployment
D. Inline deployment
Answer: C
NEW QUESTION 487
What are the requirements for configuring a routed interface on a Firepower 3D8140 sensor? (Choose two.)
A. IP address
B. HA interface
C. Virtual router
D. 1Gbps interface
E. 10Gbps interface
Answer: AC
NEW QUESTION 488
Which technology does the Cisco AMP Spero detection engineer use to identify threats?
A. Dynamic analysis
B. Static analysis
C. Fuzzy shahs
D. Machine learning
Answer: C
NEW QUESTION 489
Which two characteristics represent a Cisco device operating in tap mode? (Choose two.)
A. It analyzes copies of packets from the packet flow.
B. The packet flow traverses the device.
C. The device is deployment in a passive configuration.
D. If a rule Is triggered, the device drops the packet.
E. If a rule is triggered, the device generates an intrusion event.
Answer: AD
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
Answer: AB
NEW QUESTION 491
In the Cisco Security Appliance, which tool can be used to send a test email so a user can follow the flow of messages will the configuration?
A. Recipient access table
B. Content filter
C. Message filter
D. Policy trace
Answer: D
NEW QUESTION 492
……
~~~New PassLeader 300-210 dumps FYI~~~
od.lk/fl/NjFfMTUyNjc0OV8
(502q~~~NEW VERSION DUMPS!!!)
[(copy that short link and open it in your web browser!!!)]
What’s More:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(486q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(502q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 473
What are two analysis methods of file inspection on Network-based Cisco advanced malware protection? (Choose two.)
A. xSpero analysis
B. Network analysis
C. User analysis
D. Dynamic analysis
E. Intrusion analysis
Answer: AD
NEW QUESTION 474
Which description of a passive interface on a Cisco Firepower NGFW is true?
A. Receives traffic that is specified on an NGIPS.
B. Inaccessible when disable.
C. Effected by firewall mode.
D. Retransmits received traffic.
Answer: A
NEW QUESTION 475
An engineer is deploying AMP for the first time and cannot afford any interrupted to network traffic. Which policy types does NOT disrupted the network?
A. Protect
B. Server
C. Audit
D. tnage
Answer: C
NEW QUESTION 476
Which Cisco Advanced Malware Protection for Endpoints analysis tool records file activity within a specific host?
A. Device trajectory
B. Prevalence
C. File trajectory
D. File analysis
Answer: A
NEW QUESTION 477
Which two tasks must you perform when impalement CWS on a cisco ASA or ASAV? (Choose two.)
A. Create a new RSA key.
B. Enable the ScanSafe feature.
C. Browse to whoami.scansade.not to verify that web redirection is operating normally.
D. Create an authenticating license key.
E. Define the primary and secondary CWS proxy.
Answer: CD
NEW QUESTION 478
Which two statements about content filters on the Cisco ESA are true? (Choose two.)
A. After you create a content filter, you can create an encryption profile to encrypt messages that match the filter.
B. Each content filter requires one or more actions.
C. They can be applied before a after message filters.
D. They are applied to the message after artisan and antivirus scanning is performed.
E. Each content filter requires one or more conditions
Answer: DE
NEW QUESTION 479
Which two features does Cisco trust Anchor support? (Choose two.)
A. Secure boot
B. Image signing
C. Flood attack detection
D. SYN flood detection
E. DDoS mitigation
Answer: AB
NEW QUESTION 480
For which domain will the Cisco Email Security Appliance allow to 500 recepient per messages?
A. Orange public
B. Violet public and blue public
C. Violet public blue and green public
D. Red public and orange public
E. Red public
F. Violet public
Answer: A
NEW QUESTION 481
Which capacity us exclusive to a Cisco AMP public cloud instance as compared to a private cloud instance?
A. RBAC
B. SPERO
C. TETRA detection engine
D. ETHOS detection engine
Answer: D
NEW QUESTION 482
An engineer is using the reporting feature on a WSA, which option must they consider about the reporting capabilities?
A. Report can be viewed for a particular domain, user, or category.
B. Report must be schedules manually.
C. Report to view system activity over a specified period of time do not exist.
D. Delete reports require a separate license.
Answer: A
NEW QUESTION 483
Which description of the file trajectory feature in Cisco AMP is true?
A. Tracks information about policy updates that affect each file on a network.
B. Excludes information about file transmissions across the network.
C. Blocks the malware detected in a file sent across the network.
D. Display information about the actions performed on each file on a network.
Answer: B
NEW QUESTION 484
A user wants to conire high availability with their Cisco Firepoer deployment, which platform allow for clustering?
A. Virtual NGIPS
B. All platform support clustering
C. Cisco Firepower appliance
D. FirePOWERE Threat Defense for ISR
Answer: C
NEW QUESTION 485
Which cisco CWS traffic-redirection option is most appropriate for roaming users?
A. WSAv connector
B. CWS connector
C. Cisco ASA
D. AnyConnect
Answer: D
NEW QUESTION 486
Which type of Cisco IPS deployment are you using if you are monitoring traffic with a SPAN port?
A. Bypass deployment
B. Tap mode deployment
C. Passive deployment
D. Inline deployment
Answer: C
NEW QUESTION 487
What are the requirements for configuring a routed interface on a Firepower 3D8140 sensor? (Choose two.)
A. IP address
B. HA interface
C. Virtual router
D. 1Gbps interface
E. 10Gbps interface
Answer: AC
NEW QUESTION 488
Which technology does the Cisco AMP Spero detection engineer use to identify threats?
A. Dynamic analysis
B. Static analysis
C. Fuzzy shahs
D. Machine learning
Answer: C
NEW QUESTION 489
Which two characteristics represent a Cisco device operating in tap mode? (Choose two.)
A. It analyzes copies of packets from the packet flow.
B. The packet flow traverses the device.
C. The device is deployment in a passive configuration.
D. If a rule Is triggered, the device drops the packet.
E. If a rule is triggered, the device generates an intrusion event.
Answer: AD
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
Answer: AB
NEW QUESTION 491
In the Cisco Security Appliance, which tool can be used to send a test email so a user can follow the flow of messages will the configuration?
A. Recipieqnt access table
B. Content filter
C. Message filter
D. Policy trace
Answer: D
NEW QUESTION 448……
When configuring a FlexVPN, which two components must be configured for IKEv2? (Choose two.)
A. persistence
B. profile
C. proqaposal
D. preferenwqce
E. method
Answer: BC
@Alihk79 the answer is B
@SMA
So we assume it is for ASA not for IOS router
arent these two questions the same ??
Which two appliances support logical routed interfaces? (Choose two.)
A. FirePOWER services for ASA-5500-X
B. FP-4100-series
C. FP-8000-series
D. FP-7000-series
E. FP-9300-series
Correct Answer: BE
50.———————————————————————————————————————————————
Which two appliances support logical routed interfaces within a virtual router? (Choose two)
A. Firepower services for ASA-5500-X
B. FP-8000-series
C. FP-7000-series
D. FP-9300-series
E. FP-4100-series
Correct Answer: BC
@Alihk79
i can wrong, but I think it’s like that
@sma
ok thx another question about 5 management protocols of IPS, i think the answer should be the 4 versions of snmp and SDEE what do you think?
7000 & 8000 Series
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/setting_up_virtual_routers.html
i think, are you correct
@sma and @dot1q
what do you think about this question i didn’t understand it and didn’t understand the answers
QUESTION 217
Refer to the exhibit. When designing the network to redirect web traffic utilizing the Catalyst 6500 to the Cisco Web Security Appliance, impact on the switch platform needs
consideration.
Which four rows identify the switch behavior in correlation to the redirect method? (Choose four.)
hi all,
is this the correct group for 300-210 exam?
thanks
Hi all, and recent feedback from recente test takers?
Are the dumps reliable? Is there any Q/A?
Thanks ins advance
Please can someone provide new valid dumps, or advice for 300-210.
Thanks in advance.
@ALIHK79
Hash-Based Assignment Method Detail
The hash-based assignment mechanism relies on an algorithm performed in software. In order to leverage the hash algorithm, the first packet in a particular flow is sent from the hardware path to the software path where the hash is performed.
The software performs an XOR hash of various components of the flow and comes up with a hash that splits the traffic flows to the various WCCP entities. The hash mechanism determines how the traffic is distributed among the available WCCP entities.
The hash result is programmed into the hardware NetFlow table where subsequent packets in that flow are forwarded. Regardless of the fields available for hashing by WCCP, the full five-tuple is used. This means NetFlow is put into interface, full-flow mode when WCCP is enabled. This has implications on other features that may require NetFlow resources. See the WCCP Defects section for more details.
A common question about WCCP on the Catalyst 6500 is, “Why does the CPU utilization increase when I enable WCCP?” When hash-based assignments are in use, the software-based processing of the initial packet in each flow places a burden on the CPU and is most often the cause of increased utilization. With the currently available Policy Feature Card 3 (PFC3) forwarding hardware, if WCCP is configured as an egress feature or if hash-based assignment is in use (ingress or egress), some level of software processing is always required.
The use of the hash-based assignment method impacts these features:
NetFlow table – The number of entries supported by the PFC is limited, and the flow mask changes to interface full-flow for the entire NetFlow table.
CPU utilization – There is an increase in CPU utilization as the first packet in each flow is software switched.
Performance – The rate at which traffic is sent to the CPU for lookup is limited so that the CPU is protected.
NetFlow features – Other features that use NetFlow resources might be impacted if the NetFlow resources are consumed by WCCP.
The limitations and implications caused by the hash-based assignment requirement for software processing are applicable to both ingress and egress traffic. Impact on the CPU can be exacerbated if the network is undergoing atypical traffic patterns, such as a Denial of Service (DoS) attack. In a typical attack or worm outbreak, every packet sent by a host is to a new destination or port, which causes every packet to be processed in software. Since WCCP redirected traffic is explicitly being sent to the CPU for first-packet processing, there are limited methods of protection. The use of ‘deny’ ACL entries on the interface can limit what is sent to the CPU; however, there are no rate-limiters or other protections against these types of attacks.
Mask-Based Assignment Method Detail
Mask-based assignment is handled differently dependent upon whether it is configured on ingress or on egress.
With ingress mask-based assignment, the mask is programmed into the ACL TCAM before packet forwarding, so the NetFlow table and software processing are not needed. The WCCP entity chooses a number of hash-buckets and assigns an address mask and WCCP appliance to each bucket. Once the assignments are complete, the supervisor programs one TCAM entry and one hardware adjacency for each bucket and redirects packets that match the address mask to the associated WCCP appliance by means of an L2 rewrite.
If WCCP is configured as an ingress feature, it may use an ACL redirect-adjacency entry in the hardware ACL table. Once WCCP matches the entry, it uses an appropriate adjacency in order to perform either an L2 rewrite or GRE encapsulation. Thus, when mask assignment is used on ingress, both L2 rewrite (Supervisor Engine 2, Supervisor Engine 32, and Supervisor Engine 720) and GRE encapsulation (Supervisor Engine 32 and Supervisor Engine 720 only) are performed in hardware.
If WCCP is configured as an egress feature, ACL redirect-adjacencies are not supported in hardware because the packets in the flow have already been routed by the system. The first packet of a flow is sent to software for processing. Once the proper redirect-adjacency is determined, it is programmed into the NetFlow hardware (instead of ACL TCAM), where the entry points to an adjacency that performs either an L2 rewrite or GRE encapsulation. Subsequent packets in the flow are redirected in hardware by the NetFlow hardware.
Note: If WCCP is configured as an egress feature, mask assignment requires software processing, which negates any benefit of the mask-based assignment method.
Of the two mask-based options, only the ingress mask-based assignment enables full hardware-based forwarding for initial and subsequent packets. Any other option, such as the use of hash-based assignment or egress processing, causes software switching of the initial packet and hardware-NetFlow switched forwarding of subsequent packets.
WCCP Redirection Method
The WCCP entity, not the Catalyst 6500, dictates the hash tables and mask/value sets to the Catalyst 6500, so configuration of the redirect method is done on that appliance, and not on the Catalyst 6500 switch. The Catalyst 6500 determines the best redirect method available, based on the WCCP communications with the WCCP entity/group. This negotiation determines how redirected traffic is forwarded to the appliance. There are two redirection options: L3 (GRE) and L2 (MAC address rewrites).
With WCCPv1, the only option is L3 redirection, also known as GRE encapsulation. With L3 redirection, each WCCP redirected packet is encapsulated in a GRE header marked with a protocol type 0x883E followed by a four-octet WCCP redirect header, which is subsequently sent to the WCCP appliance (such as a cache engine).
With the introduction of WCCPv2, L2 redirection, also known as accelerated WCCP redirection, was added in order to take advantage of hardware switching platforms such as the Catalyst 6500. When WCCP uses L2 redirection, the WCCP appliance and Catalyst 6500 must be L2 adjacent (within the same L2 VLAN). Redirected L2 traffic does not use GRE encapsulation; instead, the MAC destination address is rewritten by the Catalyst 6500 to that of the L2-connected WCCP entity and forwarded through normal hardware switching.
Note: The method of forwarding to the WCCP device may not be the same method that the WCCP device uses in order to send traffic back to the Catalyst 6500. WCCP is used in order to negotiate a forward and return method that both devices support. See WCCP Return Method.
L3 (GRE) Forwarding Method
116134-config-wccp-6500-01.jpg
WCCP L3 operation involves the use of GRE as an encapsulation method. Redirected packets are encapsulated in a GRE header with a protocol type of 0x883e, along with a 4-byte WCCP redirection header that includes a service ID and hash bucket matched (WCCPv2 only). The use of GRE enables the WCCP client to be separated from the Catalyst 6500 by multiple L3 (routed) hops.
In this scenario, the options available for WCCP redirection include:
Ingress – L3 (GRE) redirection + hash assignment; this requires software processing.
Ingress – L3 (GRE) redirection + mask assignment; this requires full hardware processing and is available only on the Supervisor Engine 32 or Supervisor Engine 720.
Egress – L3 (GRE) redirection + hash assignment; this requires software processing.
Egress – L3 (GRE) redirection + mask assignment; this requires software processing.
Hey guys somebody asked below question, that meants there is PDF with 490 Qs, can somebody help me find it please…..
BWTW answer below is DE
@Go to,
Yes, My studying is based on Gio.v3, Sir –July 17th, 2019– and Erick Pineda –July 27th, 2019–.
but some answers you need to verify by yourself. for example the post dump:
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
Answer: AB, but I think the correct answer is DE, there are quite a few questions the answers are wrong.
How does the WSA policy trace tool make a request to the Proxy to emulate a client
request?
A. explicitly
B. transparently
C. via WCCP
D. via policy-based routing – noooo
can somebody explain this question please?
@Anon,
The policy trace tool allows administrators to simulate client requests as if they were made by the end users and describes the Cisco WSA behavior. It can be a powerful troubleshooting or debugging tool.
For example, assume that you configured your access policies to block downloads during peak business hours that are larger than 100 MB, by anyone other than IT staff. The policy trace tool allows you to “pretend” that you are a particular user, at a particular time, downloading a particular type of file.
In the Policy Trace Tool you need to explicitly specify the client IP address.
I would definitely go with A.
CM
Any feedbacks about the exam? who is taken the exam in the next days?
@SuperLuigi, I will take miine on 31st.
Any hint to share?
CM
any
passed
recently
thanks
anybody passed?
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
please help
share valid study guide
thanks in advance!!!
Hello!
The new PassLeader 300-210 dumps (Updated Recently) now are available, here are part of 300-210 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 473
What are two analysis methods of file inspection on Network-based Cisco advanced malware protection? (Choose two.)
A. xSpero analysis
B. Network analysis
C. User analysis
D. Dynamic analysis
E. Intrusion analysis
Answer: AD
NEW QUESTION 474
Which description of a passive interface on a Cisco Firepower NGFW is true?
A. Receives traffic that is specified on an NGIPS.
B. Inaccessible when disable.
C. Effected by firewall mode.
D. Retransmits received traffic.
Answer: A
NEW QUESTION 475
An engineer is deploying AMP for the first time and cannot afford any interrupted to network traffic. Which policy types does NOT disrupted the network?
A. Protect
B. Server
C. Audit
D. tnage
Answer: C
NEW QUESTION 476
Which Cisco Advanced Malware Protection for Endpoints analysis tool records file activity within a specific host?
A. Device trajectory
B. Prevalence
C. File trajectory
D. File analysis
Answer: A
NEW QUESTION 477
Which two tasks must you perform when impalement CWS on a cisco ASA or ASAV? (Choose two.)
A. Create a new RSA key.
B. Enable the ScanSafe feature.
C. Browse to whoami.scansade.not to verify that web redirection is operating normally.
D. Create an authenticating license key.
E. Define the primary and secondary CWS proxy.
Answer: CD
NEW QUESTION 478
Which two statements about content filters on the Cisco ESA are true? (Choose two.)
A. After you create a content filter, you can create an encryption profile to encrypt messages that match the filter.
B. Each content filter requires one or more actions.
C. They can be applied before a after message filters.
D. They are applied to the message after artisan and antivirus scanning is performed.
E. Each content filter requires one or more conditions
Answer: DE
NEW QUESTION 479
Which two features does Cisco trust Anchor support? (Choose two.)
A. Secure boot
B. Image signing
C. Flood attack detection
D. SYN flood detection
E. DDoS mitigation
Answer: AB
NEW QUESTION 480
For which domain will the Cisco Email Security Appliance allow to 500 recepient per messages?
A. Orange public
B. Violet public and blue public
C. Violet public blue and green public
D. Red public and orange public
E. Red public
F. Violet public
Answer: A
NEW QUESTION 481
Which capacity us exclusive to a Cisco AMP public cloud instance as compared to a private cloud instance?
A. RBAC
B. SPERO
C. TETRA detection engine
D. ETHOS detection engine
Answer: D
NEW QUESTION 482
An engineer is using the reporting feature on a WSA, which option must they consider about the reporting capabilities?
A. Report can be viewed for a particular domain, user, or category.
B. Report must be schedules manually.
C. Report to view system activity over a specified period of time do not exist.
D. Delete reports require a separate license.
Answer: A
NEW QUESTION 483
Which description of the file trajectory feature in Cisco AMP is true?
A. Tracks information about policy updates that affect each file on a network.
B. Excludes information about file transmissions across the network.
C. Blocks the malware detected in a file sent across the network.
D. Display information about the actions performed on each file on a network.
Answer: B
NEW QUESTION 484
A user wants to conire high availability with their Cisco Firepoer deployment, which platform allow for clustering?
A. Virtual NGIPS
B. All platform support clustering
C. Cisco Firepower appliance
D. FirePOWERE Threat Defense for ISR
Answer: C
NEW QUESTION 485
Which cisco CWS traffic-redirection option is most appropriate for roaming users?
A. WSAv connector
B. CWS connector
C. Cisco ASA
D. AnyConnect
Answer: D
NEW QUESTION 486
Which type of Cisco IPS deployment are you using if you are monitoring traffic with a SPAN port?
A. Bypass deployment
B. Tap mode deployment
C. Passive deployment
D. Inline deployment
Answer: C
NEW QUESTION 487
What are the requirements for configuring a routed interface on a Firepower 3D8140 sensor? (Choose two.)
A. IP address
B. HA interface
C. Virtual router
D. 1Gbps interface
E. 10Gbps interface
Answer: AC
NEW QUESTION 488
Which technology does the Cisco AMP Spero detection engineer use to identify threats?
A. Dynamic analysis
B. Static analysis
C. Fuzzy shahs
D. Machine learning
Answer: C
NEW QUESTION 489
Which two characteristics represent a Cisco device operating in tap mode? (Choose two.)
A. It analyzes copies of packets from the packet flow.
B. The packet flow traverses the device.
C. The device is deployment in a passive configuration.
D. If a rule Is triggered, the device drops the packet.
E. If a rule is triggered, the device generates an intrusion event.
Answer: AD
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
Answer: AB
NEW QUESTION 491
In the Cisco Security Appliance, which tool can be used to send a test email so a user can follow the flow of messages will the configuration?
A. Recipient access table
B. Content filter
C. Message filter
D. Policy trace
Answer: D
NEW QUESTION 492
……
~~~New PassLeader 300-210 dumps FYI~~~
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
[(copy that short link and open it in your web browser!!!)]
What’s More:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(486q~~~NEW VERSION DUMPS!!!)
2. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(502q~~~NEW VERSION DUMPS!!!)
3. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 473
What are two analysis methods of file inspection on Network-based Cisco advanced malware protection? (Choose two.)
A. xSpero analysis
B. Network analysis
C. User analysis
D. Dynamic analysis
E. Intrusion analysis
Answer: AD
NEW QUESTION 474
Which description of a passive interface on a Cisco Firepower NGFW is true?
A. Receives traffic that is specified on an NGIPS.
B. Inaccessible when disable.
C. Effected by firewall mode.
D. Retransmits received traffic.
Answer: A
NEW QUESTION 475
An engineer is deploying AMP for the first time and cannot afford any interrupted to network traffic. Which policy types does NOT disrupted the network?
A. Protect
B. Server
C. Audit
D. tnage
Answer: C
NEW QUESTION 476
Which Cisco Advanced Malware Protection for Endpoints analysis tool records file activity within a specific host?
A. Device trajectory
B. Prevalence
C. File trajectory
D. File analysis
Answer: A
NEW QUESTION 477
Which two tasks must you perform when impalement CWS on a cisco ASA or ASAV? (Choose two.)
A. Create a new RSA key.
B. Enable the ScanSafe feature.
C. Browse to whoami.scansade.not to verify that web redirection is operating normally.
D. Create an authenticating license key.
E. Define the primary and secondary CWS proxy.
Answer: CD
NEW QUESTION 478
Which two statements about content filters on the Cisco ESA are true? (Choose two.)
A. After you create a content filter, you can create an encryption profile to encrypt messages that match the filter.
B. Each content filter requires one or more actions.
C. They can be applied before a after message filters.
D. They are applied to the message after artisan and antivirus scanning is performed.
E. Each content filter requires one or more conditions
Answer: DE
NEW QUESTION 479
Which two features does Cisco trust Anchor support? (Choose two.)
A. Secure boot
B. Image signing
C. Flood attack detection
D. SYN flood detection
E. DDoS mitigation
Answer: AB
NEW QUESTION 480
For which domain will the Cisco Email Security Appliance allow to 500 recepient per messages?
A. Orange public
B. Violet public and blue public
C. Violet public blue and green public
D. Red public and orange public
E. Red public
F. Violet public
Answer: A
NEW QUESTION 481
Which capacity us exclusive to a Cisco AMP public cloud instance as compared to a private cloud instance?
A. RBAC
B. SPERO
C. TETRA detection engine
D. ETHOS detection engine
Answer: D
NEW QUESTION 482
An engineer is using the reporting feature on a WSA, which option must they consider about the reporting capabilities?
A. Report can be viewed for a particular domain, user, or category.
B. Report must be schedules manually.
C. Report to view system activity over a specified period of time do not exist.
D. Delete reports require a separate license.
Answer: A
NEW QUESTION 483
Which description of the file trajectory feature in Cisco AMP is true?
A. Tracks information about policy updates that affect each file on a network.
B. Excludes information about file transmissions across the network.
C. Blocks the malware detected in a file sent across the network.
D. Display information about the actions performed on each file on a network.
Answer: B
NEW QUESTION 484
A user wants to conire high availability with their Cisco Firepoer deployment, which platform allow for clustering?
A. Virtual NGIPS
B. All platform support clustering
C. Cisco Firepower appliance
D. FirePOWERE Threat Defense for ISR
Answer: C
NEW QUESTION 485
Which cisco CWS traffic-redirection option is most appropriate for roaming users?
A. WSAv connector
B. CWS connector
C. Cisco ASA
D. AnyConnect
Answer: D
NEW QUESTION 486
Which type of Cisco IPS deployment are you using if you are monitoring traffic with a SPAN port?
A. Bypass deployment
B. Tap mode deployment
C. Passive deployment
D. Inline deployment
Answer: C
NEW QUESTION 487
What are the requirements for configuring a routed interface on a Firepower 3D8140 sensor? (Choose two.)
A. IP address
B. HA interface
C. Virtual router
D. 1Gbps interface
E. 10Gbps interface
Answer: AC
NEW QUESTION 488
Which technology does the Cisco AMP Spero detection engineer use to identify threats?
A. Dynamic analysis
B. Static analysis
C. Fuzzy shahs
D. Machine learning
Answer: C
NEW QUESTION 489
Which two characteristics represent a Cisco device operating in tap mode? (Choose two.)
A. It analyzes copies of packets from the packet flow.
B. The packet flow traverses the device.
C. The device is deployment in a passive configuration.
D. If a rule Is triggered, the device drops the packet.
E. If a rule is triggered, the device generates an intrusion event.
Answer: AD
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
Answer: AB
NEW QUESTION 491
In the Cisco Security Appliance, which tool can be used to send a test email so a user can follow the flow of messages will the configuration?
A. Recipient access table
B. Contenw2qt filter
C. Message filter
D. Policy trace
Answer: D
NEW QUESTION 487
What are the requirements for configuring a routed interface on a Firepower 3D8140 sensor? (Choose two.)
A. IP address
B. HA interface
C. Virtual router
D. 1Gbps interface
E. 10Gbps interface
Answer: AC….
Hi all,
I have downloaded from this group cisco.300-210.Gio.v3.275q.pdf file.
Could someone let me know if it’s valid or not?
Are there any other files that you could share?
thanks
@Maximiliano Deboli ,
I would eliminate BC (makes no sense) and would go with DE.
CM
In regards to my previous comment, I was referring to:
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
CM
Hi!
The new PassLeader 300-208 dumps (Oct/2019 Updated) now are available, here are part of 300-208 exam questions (FYI):
od.lk/fl/NjFfMTUyNjc0NV8
(508q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(486q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
QUESTION 388
Which description of SXP is true?
A. applies SGT along every hop in the network path
B. propagates SGT on a device upon which SGT inline tagging is unsupported
C. removes SGT from every in the network path
D. propagates SGT on a device which inline tagging is supported
Answer: D
In my opinion, the correct answer should be answer B
“Therefore network devices that do not have the hardware support use a protocol called SXP (SGT Exchange Protocol). SXP is used to share the SGT to IP address mapping. This allows the SGT propagation to continue to the next device in the path.”
QUESTION 418
Which characteristic of static SGT classification is true?
A. uses MAB
B. maps a tag to an IP address
C. maps a tag to a MAC address
D. uses web authentication
Answer: A
Correct answer is B !
QUESTION 424
Which action do you take to restrict network access for endpoints that are not posture compliant?
A. Configure a dACL on the NAD.
B. Configure client provisioning services on the Cisco ISE Server
C. Assign a dynamic VLqsAN on the NAD.
D. Define the policy by configuring a standard profile.s
Answer: C
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
CM,,,
NEW QUESTION 490
Which two features of Cisco Email Security can protect your organization against email threats? (Choose two.)
A. Time-based one-time passwords
B. Data loss prevention
C. NetFlow
D. Geolocation-based filtering
E. Heunstic-based filtering
Ans: GE
Please check
https://community.cisco.com/t5/email-security/esa-and-ces-can-i-filter-based-on-geographical-location/td-p/3429110
Hi sma, all,
I have downloaded from this group cisco.300-210.Gio.v3.275q.pdf file.
Could someone let me know if it’s valid or not?
Are there any other files that you could share?
thanks
hi aouas could you please upload the file?
Thank you
Hi CrazzyMonkey best of lucks in your exam, please provide us a feedback about how was it :)
I have been studying with the vceguide
https://vceguide.com/cisco/300-210-implementing-cisco-threat-control-solutions-sitcs/
Hi SuperLuigi,
Below you can find both
https* :* // * drive.google.com/open?id=1IPLz9rmxyV6kw_x62tmAFRcGQQmPIFrP
without asterisks and spaces
SuperLuigi AND aouas BOTH ARE SPAMMER SPAMMER
SuperLuigi AND aouas BOTH ARE SPAMMER SPAMMER………
Thank you very much for sharing the link !!! and Im not an spammer lol
Im looking forward the feedback from CrazzyMonkey I hope it went good for him
Hi guys,
Are this dumps valid? Did anyone attended the exam recently?
Folks, I failed the exam. 801/825.
I will try again on next 13th. Next week will share with you the questions I remember. I have some side notes. The problem is that I am stepping out to travel and will rest for 3 days.
Stay tuned.
CM
Thanks for the response CM we will be waiting your notes, wish you the best for the next time.
@CrazyMonkey
Hardluck and wish you the best for next time, hope you can post the questions soon as my exam will be on 12 November, did you face new questions ? new Lab ?
Thanks
Hola!
The new PassLeader 300-208 dumps (Nov/2019 Updated) now are available, here are part of 300-208 exam questions (FYI):
od.lk/fl/NjFfMTUyNjc0NV8
(508q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
More:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(486q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Tom Kruse IS FAKE FAKE FAKE
Tom Kruse IS FAKE FAKE FAKE
Folks, I did my very best in order to put together the things I can remember. If by any chance something else pops out of my mind, I’ll share.
Hope you all have better luck than I did.
CM
crazzy_monkey at outlook com br
##################################################
##################################################
Command regarding MX record and activity on ESA:
The options were: (I would love to know which one is the correct)
– tophost
– nslookup
– hoststatus
– diagnostics
Question regarding outbreak rule for addtional scanning using content filter
Options were:
– Use a secondary ESA engine
– Use 2 engines simultaneously
– Send processed message to ESA
– Send a copy of the file (or message, don’t remeber) to quarantine
Concept of default Intrusion Policy
Primary Function of AMP threat Grid
I don’t remember all the options, but I am positive the answers are:
– Image signing
– Secure boot
Question about SCADA. I am sure the answer is DNP3
Question sh ip admission cache command
Two statements abou DLP.
Description of File Trajectory in AMP is true
Two descriptions of NGIPS using inline pair interface in tap mode are true
Description of L4 traffic monitor on WSA is true
D&D was about FP module preprocessors definitions
###############################################
###############################################
Questions from dump cisco.300-210.Gio.v3.275q.pdf
QUESTION 32
Which Cisco technology combats viruses and malware with virus outbreak filters that are downloaded from
Cisco SenderBase?
A. ASA
B. WSA
C. Secure mobile access
D. IronPort ESA
E. SBA
QUESTION 94
How are HTTP requests handled by the Cisco WSA?
A. A transparent request has a destination IP address of the configured proxy.
B. The URI for an implicit request does not contain the DNS host.
C. An explicit request has a destination IP address of the intended web server.
D. The URI for an explicit request contains the host with the protocol information.
QUESTION 114
When using Cisco AMP for Networks, which feature copies a file to the Cisco AMP cloud for analysis?
A. Spero analysis
B. dynamic analysis
C. sandbox analysis
D. malware analysis
QUESTION 122
An engineer is configuring a cisco ESA and wants to control whether to accept or reject email messages to
a messages to a recipient address. Which list contains the allowed recipient addresses?
A. BAT
B. HAT
C. SAT
D. RAT
QUESTION 125
An engineer wants to cluster an existing ESA physical appliance with an ESA virtual appliance. Which
statement is true?
A. This action is possible as long as the devices are running the identical AsyncOS
B. This action is not possible for virtual appliances
C. This action is possible between different models and OS
D. This action is not possible because the devices are not identical models
QUESTION 136
An engineer is configuring cisco ESA with a multilayer approach to fight virus and malware. Which two
features can be used to fulfill that task?
A. Outbreak filters
B. White list
C. RAT
D. DLP
E. Sophos engine
QUESTION 158
What is a limitation of AMP Sandbox?
A. requires fully compiled malware code
B. deployment complexity
C. single point of failure
D.
QUESTION 168
Which option is benefits of a Cisco Email Virtual Appliance as compared to physical Cisco ESA ?
A. simplifies the distribution of software update.
B. provide faster performance
C. provide an automated setup process
D. enables the allocation of additional resources
QUESTION 177
What is retrospective alerting in Cisco Advanced Malware Protection for Endpoints?
A. alerts when a file changes disposition
B. alerts on events over a week old
C. alerts showing previously installed malware
D. alerts on previously blacklisted applications
QUESTION 178
An engineer is using the reporting feature on a WSA. Which option must they consider about the reporting
capabilities?
A. Reports can be viewed for a particular domain, user or category.
B. Detail reports require a separate license.
C. Reports to view system activity over a specific period of time do not exist.
D. Report must be scheduled manually.
QUESTION 180
Which option is omitted from a query on a ESA virtual appliance?
A. raidTable
B. FailoverHealthy
C. keyExpiration
D. CPUUtilizationExceeded
QUESTION 193
A customer’s mobile clients now require content scanning, yet there is not an ASA on the network. Which
deployment method is required for the Cisco AnyConnect Web Security Module?
A. standalone component
B. enterprise connection enforcement
C. roaming umbrella component
D. APEX enforcement
QUESTION 201
With Cisco AMP for Endpoints, which option shows a list of all files that have been executed in your
environment?
A. vulnerable software
B. file analysis
C. detections
D. prevalence
E. threat root cause
QUESTION 202
A customer has recently purchased Cisco Application Visibility and Control and requires an AVC application
profile to control a recognized application.
Which two actions can be defined when creating an application profile? (Choose two.)
A. drop
B. tag
C. mark
D. alert
E. allow
QUESTION 233
Which Cisco Web Security Appliance feature enables the appliance to block suspicious traffic on all of its
ports and IP addresses?
A. Layer 4 Traffic Monitor
B. Secure Web Proxy
C. explicit forward mode
D. transparent mode
QUESTION 241
Which platform has message tracking enabled by default?
A. C670
B. C370
C. Virtual ESA
D. It is not enabled by default on any platform.
QUESTION 244
Lab simulation
QUESTION 245, 246, …
HotSpot
QUESTION 263
Which two authentication options can be leveraged for directory integration with the Cisco Web Security
ISR-G2 connector? (Choose two)
A. Kerberos
B. NTLM
C. LDAP
D. OpenID
E. SAML
QUESTION 270
An engineer is deployment the Cisco Firepower NGIPSv for VMware which two aspects are unsupported
during the deployment? (Choose two)
A. cloning a virtual machine
B. vCenter
C. restoring a backup
D. VMware tools
E. vCloud Diretor
QUESTION 272
Which description of a correlation policy configuration in the Cisco Firepower Management Center is true?
A. The system displays correlation policies that are created on all of the domains in a multidomain
deployment
B. Deleting a response group deletes the responses of that group
C. You cannot add a host profile qualification to a correlation rule that is triggered by a malware event
D. Correlation policy priorities override whitelist priorities
@CrazyMonkey
Primary Function of AMP threat Grid
I don’t remember all the options, but I am positive the answers are:
– Image signing
– Secure boot
Regarding this question I dont think that AMP threat Grid has anything to do with secure boot and Image signing
I am sorry it seems I missed some info about AMP threat Grid,
Image signing
Secure Boot
I think they are correct
@Alihk79,
When I studying I stumbled with this question, and had to dig deep to find these functions on Cisco’s site.
I don’t have the link, but it’s there, somewhere.
Additional questions, drop me a line.
CM
@Crazzy_Monkey
https://www.cisco.com/c/dam/en/us/td/docs/security/amp_threatgrid/threat-grid-appliance-release-notes-v2-4-2.pdf
here is the link talking about secure boot but couldnt find other option like image signing or others,
I am trying to search more about this question
Question regarding outbreak rule for addtional scanning using content filter
Options were:
@Alihk79,
As I wrote, I had to dig hard in order to confirm the secure boot + image signing features.
If you find something regarding the Outbreak rule, please share.
CM
The question:
Command regarding MX record and activity on ESA:
The options were:
– tophost
– nslookup
– hoststatus
– diagnostics
The correct is hoststatus
CM
Hi Guys
Just found a shared link, Hope it helps for those who don’t have Gio file (PDF, ETE, VCE):
https: // drive . google . com / open?id=1qhTpd3O8y0EyzhNMgObvDBYkybSosCWV
@CrazzyMonkey, thanks for sharing ur experience.
That link also includes:
Marks4Sure 300-210 SITC v14 Nov 2018 (431Q) file
QUESTION 270
An engineer is deployment the Cisco Firepower NGIPSv for VMware which two aspects are unsupported
during the deployment? (Choose two)
A. cloning a virtual machine
B. vCenter
C. restorqwing a backup
D. VMware tools
E. vCloud Diretor
hell guys
have big news
The most favorable price this year!
Dumps for 70% off and Gifts for you.
Free LAB, Free WRITTEN DUMPS.
End this Black Friday Month.
ciscodumps09 dot livejournal dot com/1509.html
Hola CM,
Which of those questions did you get on the exam?
1.————————————————————–Which two statements about content filters on the Cisco ESA are true?[A]. EACH CONTENT FILTER REQUIRES ONE OR MORE ACTIONS.
[B]. Each content filter requires one or more conditions
[C]. They can be applied before or after message filters
[D]. After you create a content filter, you can create an encryption profile to encrypt messages that match the filter.
[E]. THEY ARE APPLIED TO THE MESSAGE AFTER ANTISPAM AND ANTIVIRUS SCANNING IS PERFORMEDanswer : A E2.————————————————————-Which characteristic is unique to a Cisco Web Security Virtual Appliance as compared to a physical
appliance?A. Support VMware vMotion on VMware ESXi
B. perform transparent redirection
C. require additional license
D. support ssl decryptionanswer : A3.————————————————————-When you view a FireAMP Analysis Overview to mitigate a malware issue, where do you look for information about sites from Which the malware attempted
to download additional files?A. Startup section
B. Dropped Files section
C. Threat Root Cause section
D. Involved IP Addresses sectionanswer : D4.————————————————————–ESA—————–>dynamic threat control for email
WSA—————->dynamic threat control for web traffic
AMP—————->endpoint control
StealthWatch—->network forensic
Firepower——–>real-time threat management
ISE——————>user and device identity management5.————————————————————–CIP———————————-> supports industrial automation application
Transport & network layer—>detects attacks that exploit a checksum validation
DNP3——————————> used in transportation industries
Application layer ————–> occurs after the selection of the access control rules6.———————————————————————–A. The user is being matched against the student policy because the user did not enter credentials.
B. The user is using an unsupported browser so the credentials are not working.
C. The social networking URL was entered into a custom URL category that is blocked in the access policy.
D. The user is connected to the wrong network and is being blocked by the student policy.
E. The social networking category is being allowed but the AVC policy is still blocking the website.
Answer: CE7.——————————————————————————————————-which two features of Cisco Email Security can protect your organization against email threats?(choose two)
Time-based one-time passwords
Data loss prevention
Heuristic-based filtering
Geolocation-based filtering
NetFlow
Answer: C,D8.——————————————————————————————————-which two statements about content filters on the Cisco ESA are true? (Choose two)
Each content filter requires one or more actions.
Each content filter requires one or more conditions
They can be applied before or after message filters
After you create a content filter, you can create an encryption profile to encrypt messages that match the filter.
They are applied to the message after antispam and antivirus scanning is performed
Answer: AE9.———————————————————————————————————which two statements about ESA clusters are true? (Choose two.)
When a new appliance is added to the cluster it inherited the policy settings, content filters, and outbreak quarantine settings of the cluster.
Each machine int the cluster can be a member of only one machine group
THEY CAN BE MANAGED FROM THE CLI OR WITH A GUI
They are deployed and managed using a peer-to-peer architecture.
THEY ARE DEPLOYED AND MANAGED USING A MASTER-SLAVE ARCHITECTURE.
Answer: BD10.———————————————————————————————————-which two argument can be used with the show content-scan command in Cisco IOS software? (Choose two)
Buffer
Data
Verbose
Statistics
Session
Answer: DE11.———————————————————————————————————–which function is the primary function of Cisco AMP threat Grid?
IT ANALYZES COPIES OF PACKETS FROM THE PACKET FLOW
The device is deployed in a passive configuration
IF A RULE IS TRIGGERED THE DEVICE GENERATES AN INTRUSION EVENT.
The packet flow traverses the device
If a rule is triggered the device drops the packet
Answer: AC12.————————————————————————————————————-which technology does the Cisco AMP Spero detection engine use to identify threats?
fuzzy hashes
MACHINE LEARNING
dynamic analysis
Static analysis.
Answer: B13.————————————————————————————————————-what is the primary benefits of deploying an ESA in hybrid mode?
It provides the lowest total cost of ownership by reducing the need for physical appliances.
You can fine-tune its settings to provide the optimum balance security and performance for you environment.
IT PROVIDES EMAIL SECURITY WHILE SUPPORTING THE TRANSITION TO THE CLOUD.
It provides maximum protection and control of outbound messages.
Answer: C14.————————————————————————————————————-wich two feature of cisco trust anchor
flood attack detection.
SECURE BOOT
IMAGE SIGNING
DDoS mitigation
SYN flood detection
Answer: BC15.————————————————————————————————————–which two routing options are valid with Cisco FirePOWER version 5.4? (Choose two)
Layer 3 routing with static routes
LAYER 3 ROUTING WITH RIPV1
LAYER 3 ROUTING WITH EIGRP
Layer 3 routing with OSPF stub area
Layer 3 routing with OSPF not-so-stubby area
Answer: BD16.————————————————————————————————————–which two statements about content filters on the Cisco ESA are true? (Choose two)
Each content filter requires one or more actions.
Each content filter requires one or more conditions
They can be applied before or after message filters
After you create a content filter, you can create an encryption profile to encrypt messages that match the filter.
They are applied to the message after antispam and antivirus scanning is performed
Answer: AC17.————————————————————————————————————–which function is the primary function of Cisco AMP threat Grid?
automated email encryption
applying a real-time URI blacklist
AUTOMATED MALWARE ANALYSIS
monitoring network traffic
Answer: C18.————————————————————————————————————–which type of Cisco IPS deployment are you using if you are monitoring traffic with a SPAN port?
tap mode deployment
PASSIVE DEPLOYMENT
bypass deployment
inline deployment
Answer: B19.————————————————————————————————————-which two Cisco technologies must you use to enable transparent user identification on a Cisco WSA? (Choose two)
Cisco Prime Infrastructure
CISCO CDA
Cisco CSM
Cisco ACS
CISCO ISE
Answer: BE20.————————————————————————————————————–which two tasks you must perform when you implement CWS on a Cisco ASA or ASAv? (choose two)
DEFINE THE PRIMARY AND SECONDARY CWS PROXY
Enable the ScanSafe feature
Create a new RSA key
Browse to whoami.scansafe.net to verify that web redirection is operating normally
CREATE AN AUTHENTICATION LICENSE KEY
Answer: AE21.————————————————————————————————————–which two features of Cisco Email Security can protect your organization against email threats?(choose two)
Time-based one-time passwords
DATA LOSS PREVENTION
HEURISTIC-BASED FILTERING
Geolocation-based filtering
NetFlow
Answer: B, C22.————————————————————————————————————–which Cisco CWS traffic-redirection option is most appropriate for roaming users?
AnyConnect
CWS connector
WSAV CONNECTOR
Cisco ASA
Answer: C23.————————————————————————————————————–ASAv1# sh run scansafe
!
scansafe general-options
server primary ip 172.16.1.2 port 8080
server secondary ip 172.16.1.3 port 8080
retry-count 10
!
Refer to exhibit. Which tool do you use to verify whether a primary server established a connection to Cisco CWS on a Cisco ASA ?
Telnet
TCP PING
ping
traceroute
Answer: B24.——————————————————————————————————————Q-8
which cisco WSA feature supports access control using URL categories?
User session restrictions
Transparent user identification
WEB USAGE CONTROLS
SOCKS proxy services
Answer: C25.——————————————————————————————————————-Q-7
ASA# Show service-policy sfr
global policy:
service-policy: global_policy
class-map: SFR
SFR: car status UP, mode fail-open monitor-only
Packet input 0, packet output 44715478687, drop 0, reset-drop 0Refer to exhibit. Which two descriptions of the configurations of the Cisco FirePOWER Services module are true? (Choose two)
The module is operating in IPS mode
Traffic is blocked if the module fails
THE MODULE IS OPERATING IN IDS MODE
Traffic continues to flow if the module fails
THE MODULE TAILS TO RECEIVE REDIRECTED TRAFFIC
Answer: CD26.——————————————————————————————————————–Which capability is exclusive to a Cisco AMP public cloud instance as compared to a private cloud instance?
RBAC
ETHOS detection engine
SPERO DETECTION ENGINE
TETRA detection engine
Answer: B27.———————————————————————————————————————-Which SSL decryption policy can be used to protect HTTPS servers from external traffic?
Decrypt Re-sign
Block
DECRYPT KNOWN KEY
Enable SSL Decryption
Answer: C28.———————————————————————————————————————-Which two descriptions of a Cisco FirePOWER NGIPS deployment that uses an inline Pair Interface in tap mode are true? (Choose two.)
Transit traffic can be features are available.
ALL THE CISCO ASA ENGINE FEATURES ARE AVAILABLE
Two physical interfaces are bridged inter really
THE DEPLOYMENT IS AVAILABLE IN TRANSPARENT MODE ONLY
More than two interfaces can be bridged
Answer: AC30.————————————————————————————————————————-Which action controls the amount of URI text that is stored in Cisco WSA logs files?
Configure the datasecurityconfig command
CONFIGURE THE ADVANCEDPROXYCONFIG COMMAND WITH THE HTTPS SUBCOMMAND
Configure a small log-entry size.
Configure a maximum packet size.
Answer: B31.————————————————————————————————————————–Q-2
Drag and drop the Cisco Cyber Threat Defense solutions:-
——————————————————
ESA—————–>dynamic threat control for email
WSA—————->dynamic threat control for web traffic
AMP—————->endpoint control
StealthWatch—->network forensic
Firepower——–>real-time threat management
ISE——————>user and device identity management32.—————————————————————————————————————————Q-1
you are troubleshooting the proxy connections going through a Cisco WSA. Which CLI tool do you use to monitor a log file in real time?
grep
nslookup
dig
tail
Answer: D33.—————————————————————————————————————————2- Cisco Cyber Threat Defense solutions:-
——————————————————
ESA—————–>dynamic threat control for email
WSA—————->dynamic threat control for web traffic
AMP—————->endpoint control
StealthWatch—->network forensic
Firepower——–>real-time threat management
ISE——————>user and device identity management34.—————————————————————————————————————————-2 D&D
1- Cisco ASA Firepower module preprocessors:-
————————————————————–
CIP———————————-> supports industrial automation application
Transport & network layer—>detects attacks that exploit a checksum validation
DNP3——————————> used in transportation industries
Application layer ————–> occurs after the selection of the access control rules35.——————————————————————————————————————————Lab Configuration
Branch ISR
—————
int fa0/1
content-scan out
————————
parameter-map type content-scan global
server scansafe primary name proxy-a.scansafe.net port http 8080 https 8080
server scansafe secondary name proxy-b.scansafe.net port http 8080 https 8080
license 0 0123456789abcdef
server scansafe on-failure block-all
source interface fa0/1
copy running-config startup-config
#To verify the scansafe:
show content summary
show content-scan36.——————————————————————————————————————————“An engineer must architect an AMP private cloud deployment. What is the benefit of running in air-gaped mode? (choose two)
A. Internet connection is not required for disposition
B. Database sync time is reduced
C. Disposition queries are done on AMP appliances
D. A dedicated server is needed to run amp-sync.”
I think A and D sound good.37.——————————————————————————————————————————–“Which two statement about Cisco Firepower file and intrusion inspection under control policies are true? (Choose two.)
A. File inspection occurs before intrusion prevention.
B. Intrusion Inspection occurs after traffic is blocked by file type.
C. File and intrusion drop the same packet.
D. Blocking by file type takes precedence over malware inspection and blocking
E. File inspection occurs after file discover
A and D again – as per a dump.38.——————————————————————————————————————————–Which description of the Cisco ASA Connector in a Cisco CWS solution is true?
A. enables the ASA to download information from CWS
B. deploys a VPN connection to the CWS cloud
C. securely redirects specified traffic to the CWS cloud for inspection
D. permits the IP addresses required by CWS in the ASA access policy
Correct Answer: C39.——————————————————————————————————————————–Which ports must be configured on the Firepower to support communication with the CWS (choose 2)
A. inbound tcp 80
B. inbound tcp 443
C. outbound tcp 443
D. outbound tcp 80
E. biderectional 443
Correct Answer: DE40.———————————————————————————————————————————A network engineer must generate troubleshooting files on a Cisco Firepower NGIPv device. Which command does the network engineer run?
A. sudosf_troubleshoot_ip
B. show tech-support
C. system generate-troubleshoot all
D. tech-support details
Answer: C41.————————————————————————————————————————————–Which two Snort actions are available by default creating Snort rules, regardless of deployment mode? (Choose two)
A. activate
B. sdrop
C. drop
D. pass
E. reject
Answer: AD42.————————————————————————————————————————————–When you want to decrypt traffic using Decrypt – Known Key from your server to a some host in the internet, what should you do:
1. Something about PKI
2. Something about PKI
3. Upload public and private key in the FMC
4. Upload only private key in the FMC43.————————————————————————————————————————————–Regarding this question:
What is the function of the Cisco Context Adaptive Scanning Engine in Cisco Hybrid Email Security services?
A. It uses real-time traffic threat assessment to identify suspicious email senders and messages.
B. It provides a preventive defense against viruses by scanning messages before they enter the network.
C. It analyzes message content and attachments to protect an organization’s intellectual property.
D. It protects against blended threats by using human-like logic to review and evaluate traffic.44.—————————————————————————————————————————————A network engineer must generate troubleshooting files on a Cisco Firepower NGIPv device. Which command does the network engineer run?
A. sudosf_troubleshoot_ip
B. show tech-support
C. system generate-troubleshoot all
D. tech-support details
Answer: C45.—————————————————————————————————————————————-Which two Snort actions are available by default creating Snort rules, regardless of deployment mode? (Choose two)
A. activate
B. sdrop
C. drop
D. pass
E. reject
Answer: AD46.—————————————————————————————————————————————–QUESTION 74
Which two statements about Cisco ESA clusters are true? (Choose two.)
A. A cluster must contain exactly one group.
B. A cluster can contain multiple groups.
C. Clusters are implemented in a client/server relationship.
D. The cluster configuration must be managed by the cluster administrator.
E. The cluster configuration can be created and managed through either the GUI or the CLI.Answe: BC47.——————————————————————————————————————————————QUESTION 179
Which SSL traffic decryption feature is used when
decrypting traffic from an external host to server
on your network?
A. decrypt by stripping the server certificate
B. decrypt with a known public key
C. decrypt by resigning the server certificate
D. decrypt with a known private keyanswer : D48.——————————————————————————————————————————————-Which is a feature of Cisco AMP?
A. Spero Analysis
B. Network Analysis
C. Dynamic Analysis
D. Intrusion Analysis
E. User Analysis
answer A & C49.——————————————————————————————————————————————–Which two appliances support logical routed interfaces? (Choose two.)
A. FirePOWER services for ASA-5500-X
B. FP-4100-series
C. FP-8000-series
D. FP-7000-series
E. FP-9300-series
Correct Answer: BE50.———————————————————————————————————————————————Which two appliances support logical routed interfaces within a virtual router? (Choose two)
A. Firepower services for ASA-5500-X
B. FP-8000-series
C. FP-7000-series
D. FP-9300-series
E. FP-4100-series
Correct Answer: BC51.———————————————————————————————————————————————-Which Cisco IOS command uses the default class map to limit SNMP inspection to traffic from 10.1.1.0 to 192.168.1.0?
A. hostname(config)# access-list inspect extended permit ip 10.1.1.0.0.0.0.255 192.168.1.0.0.0.0.255
hostname(config)# class-map inspection_default hostname(config-cmap)# match access-list inspect
B. hostname(config)# access-list inspect extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
hostname(config-cmap)# match access-list inspect
C. hostname(config)# access-list inspect extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0 hostname(config)# class-map inspection_default hostname(configcmap)#
match access-list inspect
D. hostname(config)# access-list inspect extended permit ip 10.1.1.0.0.0.255 192.168.1.0.0.0.255
hostname(config)# class-map inspection_defaultAnswer : A52.————————————————————————————————————————————————-A Cisco Web Security Appliance’s policy can provide visibility and control of which two elements? (Choose two.)
A. Voice and Video Applications
B. Websites with a reputation between -100 and -60
C. Secure websites with certificates signed under an unknown CA
D. High bandwidth websites during business hours
Correct Answer: AD53.—————————————————————————————————————————————————eb security appliance is inspecting inbound traffic. In which sequence is inbound https traffic inspected?
A. Routing Policy > Decryption Policy > Access Policy
B. Access Policy > Decryption Policy > Routing Policy
C. Routing Policy > Access Policy > Decryption Policy
D. Decryption Policy > Access Policy > Routing Policy
E. Decryption Policy > Routing Policy > Access Policy
F. Access Policy > Routing Policy > Decryption Policy
The correct answer should be B54.—————————————————————————————————————————————————Which two practices are recommended for implementing NIPS at enterprise Internet edges?
(Choose two.)
A. Integrate sensors primarily on the more trusted side of the firewall (inside or DMZ interfaces).
B. Integrate sensors primarily on the less trusted side of the firewall (outside interfaces).
C. Implement redundant IPS and make data paths symmetrical.
D. Implement redundant IPS and make data paths asymmetrical.
E. Use NIPS only for small implementations.
Correct Answer: AC55.—————————————————————————————————————————————————–What is the function of the Cisco Context Adaptive Scanning Engine in Cisco Hybrid Email Security services?
A. It uses real-time traffic threat assessment to identify suspicious email senders and messages.
B. It provides a preventive defense against viruses by scanning messages before they enter the network.
C. It analyzes message content and attachments to protect an organization’s intellectual property.
D. It protects against blended threats by using human-like logic to review and evaluate traffic.
Correct Answer: D56.—————————————————————————————————————————————————–Which type of policy is used to define the scope of applications that are running on hosts?
A. access control policy.
B. application awareness policy
C. application detector policy
D. network discovery policy
Correct Answer: A
@CCNP SWITCH,
As far as I can remember, from your list:
1,7,12,15,19,25,35-LAB,41 were on my exam.
CM
Hi CrazzyMonkey thanks for sharing the experience, but I would like to know which Sim o LAB did you get in the exam? Is it reliable the GIo file?
@SuperLuigi
As posted before, the lab and sim were from GIO’s dump. See below:
QUESTION 244
Lab simulation
QUESTION 245, 246, …
HotSpot
CM
@CrazzyMonkey
Thank´s for you feedback. Thinking on having this exam in beginning of December,
Tell us about your experience..in your next exam
By the way tho you use the ete program, or study only by PDF´s
Greetings from PT
@Anonymous
I used PDFs.
CM
@CrazzyMonkey
Did you study only cisco.300-210.Gio.v2.273q.pdf or something more?
thanks
@aouas
Besides Gio’s and a lot, a whole lot of pages on the internet, mainly on Cisco’s site:
Cisco FTD Configuration and Troubleshooting Best Practices
Integrated Security Technologies and Solutions – Volume I
Cisco Next-Generation Security Solutions All-in-one Cisco ASA Firepower Services, NGIPS, and AMP
Cisco Email Security with Cisco IronPort
CCNP Security IPS 642-627 Oficial Cert guide
CCNP Security IPS 642-627 Quick Reference
VCEGuide.com to check the Dumps answers.
CM
can you share or send me your .pdf or vce of dumps??
El_vato…
@CrazzyMonkey can you share or send me your .pdf or vce of dumps??
El_vato…
Hi,
which is the last Version of Passleader and is it stable I want to buy it.
Then I can share it here.
Please let me know!
Can you recommend me the best dumps for CCNP-Security I have a bit expierence and Enough Tutorial! But I want to pass the exam before 23 Februar.
Thank you very much in advance
@El_vato
You can find the Gio dump in
https* :* // * drive.google.com/open?id=1IPLz9rmxyV6kw_x62tmAFRcGQQmPIFrP
Also, some stuff in
https: // drive . google . com / open?id=1qhTpd3O8y0EyzhNMgObvDBYkybSosCWV
I did not use any vce engine.
CM
Hi CrazzyMonkey, thx for ur sharing. :) are these dumps Stable?
Is it work the vce. Player by you?
D. decrypt with a known private keyanswer : D48.——————————————————————————————————————————————-Which is a feature of Cisco AMP?
A. Spero Analysis
B. Network Analysis
C. Dynamic Analysis
D. Intrusion Analysis
E. User Analysis
answer A & C49.——————————————————————————————————————————————–Which two appliances support logical routed interfaces? (Choose two.)
A. FirePOWER services for ASA-5500-X
B. FP-4100-series
C. FP-8000-series
D. FP-7000-series
E. FP-9300-series
Correct Answer: BE50.———————————————————————————————————————————————Which two appliances support logical routed interfaces within a virtual router? (Choose two)
A. Firepower services for ASA-5500-X
B. FP-8000-series
C. FP-7000-series
D. FP-9300-series
E. FP-4100-series
Correct Answer: BC51.———————————————————————————————————————————————-Which Cisco IOS command uses the default class map to limit SNMP inspection to traffic from 10.1.1.0 to 192.168.1.0?
A. hostname(config)# access-list inspect extended permit ip 10.1.1.0.0.0.0.255 192.168.1.0.0.0.0.255
hostname(config)# class-map inspection_default hostname(config-cmap)# match access-list inspect
B. hostname(config)# access-list inspect extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0
hostname(config-cmap)# match access-list inspect
C. hostname(config)# access-list inspect extended permit ip 10.1.1.0 255.255.255.0 192.168.1.0 255.255.255.0 hostname(config)# class-map inspection_default hostname(configcmap)#
match access-list inspect
D. hostname(config)# access-list inspect extended permit ip 10.1.1.0.0.0.255 192.168.1.0.0.0.255
hostname(config)# class-map inspection_defaultAnswer : A52.————————————————————————————————————————————————-A Cisco Web Security Appliance’s policy can provide visibility and control of which two elements? (Choose two.)
A. Voice and Video Applications
B. Websites with a reputation between -100 and -60
C. Secure websites with certificates signed under an unknown CA
D. High bandwidth websites during business hours
Correct Answer: AD53.—————————————————————————————————————————————————eb security appliance is inspecting inbound traffic. In which sequence is inbound https traffic inspected?
A. Routing Policy > Decryption Policy > Access Policy
B. Access Policy > Decryption Policy > Routing Policy
C. Routing Policy > Access Policy > Decryption Policy
D. Decryption Policy > Access Policy > Routing Policy
E. Decryption Policy > Routing Policy > Access Policy
F. Access Policy > Routing Policy > Decryption Policy
The correct answer should be B54.—————————————————————————————————————————————————Which two practices are recommended for implementing NIPS at enterprise Internet edges?
(Choose two.)
A. Integrate sensors primarily on the more trusted side of the firewall (inside or DMZ interfaces).
B. Integrate sensors primarily on the less trusted side of the firewall (outside interfaces).
C. Implement redundant IPS and make data paths symmetrical.
D. Implement redundant IPS and make data paths asymmetrical.
E. Use NIPS only for small implementations.
Correct Answer: AC55.—————————————————————————————————————————————————–What is the function of the Cisco Context Adaptive Scanning Engine in Cisco Hybrid Email Security services?
A. It uses real-time traffic threat assessment to identify suspicious email senders and messaeqwges.
B. It provides a preventive defense against viruses by scanning messages before they enter the network.
C. It analyzes message content and attachments to protect an organization’s intellectual property.
D. It protects against blended threats by using human-like logic to review and evaluate traffic.
Correct Answer: D56
D. decrypt with a known private keyanswer : D48.——————————————————————————————————————————————-Which is a feature of Cisco AMP?
A. Spero Analysis
B. Network Analysis
C. Dynamic Analwysis
D. Intrusion Analysis
E. User Analysis
answer A & C49.——————————————————————————————————————————————–Which two appliances support logical routed interfaces? (Choose two.)
Refer to the exhibit. Which option is a result of this configuration?
A. All ingress traffic on the inside interface that matches the access list is redirected.
B. All egress traffic on the outside interface that matches the access list is redirected.
C. All TCP traffic that arrives on the inside interface is redirected.
D. All ingress and egress traffic is redirected to the Cisco FirePOWER module.
Answer: A or D
@CCNP SWITCH
Correct is A. The sfr-open is the key word.
@CM
@CCNP SWITCH
This link contains pdf files with 492 questions. I see the latest file contains 513q but i can´t find it.
Can someone confirm if those files is still valid??? or share a vce valid??
https **: *//***drive.google.com/drive/folders/0B-ob6L_QjGLpTkN0N2xZSHZKY2s
Hello!
The new PassLeader 300-208 dumps (Updated Recently) now are available, here are part of 300-208 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 500
What are two advantages of a single-SSID deployment over a multi-SSID implementation? (Choose two.)
A. Only single-SSID deployments allow the user to verify the identity of the BYOD server.
B. Single-SSID deployments are more appropriate for BYOD environments.
C. Single-SSID deployments offer a more secure connection experience than multi-SSID implementations.
D. Single-SSID deployments are more appropriate for clients that are already configured for wired 802.1x on another network.
E. Single-SSID deployments provide a better experience for users of iOS devices.
Answer: DE
NEW QUESTION 501
Which RADIUS service type can identify authentication attempts from devices that lack a supplicant?
A. Ethernet
B. Wireless-IEEE 802.11
C. Call Check
D. Framed
Answer: C
NEW QUESTION 502
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all TACACS+ communication.
B. It uses a single VIP on the network access device.
C. It uses a single TCP connection for all RADIUS communication.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: A
NEW QUESTION 503
What represents the default Cisco IOS RADIUS attribute-value pair?
A. User name= 5, password= 4, NAS-IP Address= 4, NAS-Port= 5
B. User name= 0, password= 1, NAS-IP Address= 2, NAS-Port= 3
C. User name= 1, password= 2, NAS-IP Address= 4, NAS-Port= 5
D. User name= 1, password= 2, NAS-IP Address= 3, NAS-Port= 4
Answer: C
NEW QUESTION 504
In which scenario might it be helpful to adjust the network transition delay timer?
A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation
Answer: C
NEW QUESTION 505
Which statement about single-SSID environment is true?
A. It allows for the wired and wireless adapters to be provisioned in any order.
B. It provides access to the guest SSID after the device has completed provisioning with the provisioning SSID.
C. It uses the same SSID for certificate enrollment, provisioning, and secure network access.
D. It can use the Fast SSID Change feature to improve performance.
Answer: C
NEW QUESTION 506
……
P.S.
PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(508q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
More:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Good Evening Guys? anyone preparing to write this week? some few new questions
Which two products can get file disposition from the Cisco Advance Malware Protection cloud? (Choose two)
A. Cisco identity Service Engine
B. Cisco Advance Malware Protection Threat Grid.
C. Cisco AnyConnect.
D. Cisco Web Security Appliance.
E. Cisco Email Security Appliance
Which two routing options are valid with Cisco FirePower version 5.4? (Choose two)
A. layer 3 routing with OSPF are surbs.
B. layer 3 routing with static routes
C. layer 3 routing with OSPF not-so-stubby area.
D. layer 3 routing with EIGRP.
E. layer 3 routing with RIPv1.
QUESTION 488
Which two tasks must you perform when you implement CWS on a Cisco ASA or ASAv? (Choose two.)
A. Browse to whoami.scansafe.net to verify that web redirection is operating normally.
B. Enable the ScanSafe feature.
C. Create an authentication license key.
D. Create a new RSA key.
E. Define the primary and secondary CWS proxy.
Answer: AC or CE?
QUESTION 432
A network engineer is configuring URL Filtering on the Cisco ASA with Firewall services. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service? (Choose two.)
A. outbound port TCP/443
B. inbound port TCP/80
C. inbound port TCP/443
D. outbound port TCP/80
E. bidirectional port TCP/443
Answer: CE?
QUESTION 404
A network administrator noticed that all traffic that is redirected to the Cisco WSA from the Cisco ASA firewall cannot get to the internet in a Transparent proxy environment using WCCP. Which
troubleshooting actions can be taken on the CLI to make sure WCCP communication is not falling
A. Ping the WCCP device.
B. Disable WCCP to see if the WCCP service is causing the issue.
C. Check WCCP logs in debugs mode to check there are n pending HIA or ISY requests.
D. Explicitly point the browser to the proxy.
Answer: B or C?