Share your FIREWALL Experience
Cisco has made changes for the Security exams by replacing the old CCSP with the new CCNP Security Certification with 4 modules: Secure, Firewall, IPS and VPN. In fact, the old CCSP and the new CCNP Security are very similar. Many candidates have requested us to put up materials for these new exams but it is a time-consuming work. In the mean time, we created the “Share your experience” for the FIREWALL exam. We really hope anyone who read securitytut, 9tut, digitaltut, certprepare, networktut and voicetut contribute to these sections as your experience is invaluable for CCNP Security learners to complete their goals.
Please share with us your experience after taking the FIREWALL 642-617 exam, your materials, the way you learned, your recommendations…
Hi guys,
there is a Telegram group to share the experience and also discuss about the questions
https://t.me/ccnpsecurity206
Auto ban for boot messages about dumps
What AIC features are supported by ZFW in Cisco IOS? (Choose three)
A. protocol minimization
B. detection of covert tunneling
C. verification of IPSec tunnels establishment
D. global correlation
E. deep / specific DNS inspection
F. URL filtering
There is some custom application that on first communication channel negotiates second data channel for data transfer. What allows traffic from second negotiated data channel?
A. packet reflection feature
B. packet inspection feature
C. host table
D. communication table
@Future CCNP I have rescheduled my exam.. will share my experience after the exam.
Barely passed 206 with 870 last week. Approx 10 new questions and another 10 with some wording changes on the existing questions and different answers.
4 D&D is the same.
Usual topics, BTF, Netflow, SNMP, ASA, CSM, Packet-Tracer, Capture, DNS, DHCP, DAI. Don’t trust the dumps even the topics that has been discussed over and over again here in the forum. Simple change of words will make the answer totally different. Good for testing those that dumps without thinking.
Anybody has the PL for 300-210 or Spoto for 300-210 ?
@Exam_Next_Week congrats. what was passing?
Hi!
The new PassLeader 300-208 dumps (Updated Recently) now are available, here are part of 300-208 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 501
Which RADIUS service type can identify authentication attempts from devices that lack a supplicant?
A. Ethernet
B. Wireless-IEEE 802.11
C. Call Check
D. Framed
Answer: C
NEW QUESTION 502
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all TACACS+ communication.
B. It uses a single VIP on the network access device.
C. It uses a single TCP connection for all RADIUS communication.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: A
NEW QUESTION 503
What represents the default Cisco IOS RADIUS attribute-value pair?
A. User name= 5, password= 4, NAS-IP Address= 4, NAS-Port= 5
B. User name= 0, password= 1, NAS-IP Address= 2, NAS-Port= 3
C. User name= 1, password= 2, NAS-IP Address= 4, NAS-Port= 5
D. User name= 1, password= 2, NAS-IP Address= 3, NAS-Port= 4
Answer: C
NEW QUESTION 504
In which scenario might it be helpful to adjust the network transition delay timer?
A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation
Answer: C
NEW QUESTION 505
Which statement about single-SSID environment is true?
A. It allows for the wired and wireless adapters to be provisioned in any order.
B. It provides access to the guest SSID after the device has completed provisioning with the provisioning SSID.
C. It uses the same SSID for certificate enrollment, provisioning, and secure network access.
D. It can use the Fast SSID Change feature to improve performance.
Answer: C
NEW QUESTION 506
……
P.S.
PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(508q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
And:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Please note that I am a fraud. If you see post like mine ignore them
Chris Chen IS FAKE FAKE FAKE FAKE
Chris Chen IS FAKE FAKE FAKE FAKE
Hello everyone. Any updates? I’ll have exam next week.
Good morning to all.
Sorry for some advice for test 300-206.
I have followed the forum but lately there are no comments with the tests 300-206.
Do you know if there are new questions?
I think there might be about 10 or so new questions. Labs/sims remain the same. Sorry I cannot give more info
NEW QUESTION 501
Which RADIUS service type can identify authentication attempts from devices that lack a supplicant?
A. Ethernet
B. Wireless-IEEE 802.11
C. Call Check
D. Framed
Answer: C
NEW QUESTION 502
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all TACACS+ communication.
B. It uses a single VIP on the network access device.
C. It uses a single TCP connection for all RADIUS communication.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: A
NEW QUESTION 503
What represents the default Cisco IOS RADIUS attribute-value pair?
A. User name= 5, password= 4, NAS-IP Address= 4, NAS-Port= 5
B. User name= 0, password= 1, NAS-IP Address= 2, NAS-Port= 3
C. User name= 1, password= 2, NAS-IP Address= 4, NAS-Port= 5
D. User name= 1, password= 2, NAS-IP Address= 3, NAS-Port= 4
Answer: C
NEW QUESTION 504
In which scenario might it be helpful to adjust the network transition delay timer?
A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation
Answer: C
NEW QUESTION 505
Which statement about single-SSID environment is true?
A. It allows for the wired and wireless adapters to be provisioned in any order.
B. It providesw access to the guest SSID after the device has completed provisioning with the provisioning SSID.
C. It uses the same SSID for certificate enrollment, provisioning, and secure network access.
D. It can use the Fast SSID Change feature to improve performance.
Answer: C
NEW QUESTION 504
In which scenario might it be helpful to adjust the network transition delay timer?
A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation
Answer: C……………
Hi!
The new PassLeader 300-208 dumps (Updated Recently) now are available, here are part of 300-208 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 501
Which RADIUS service type can identify authentication attempts from devices that lack a supplicant?
A. Ethernet
B. Wireless-IEEE 802.11
C. Call Check
D. Framed
Answer: C
NEW QUESTION 502
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all TACACS+ communication.
B. It uses a single VIP on the network access device.
C. It uses a single TCP connection for all RADIUS communication.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: A
NEW QUESTION 503
What represents the default Cisco IOS RADIUS attribute-value pair?
A. User name= 5, password= 4, NAS-IP Address= 4, NAS-Port= 5
B. User name= 0, password= 1, NAS-IP Address= 2, NAS-Port= 3
C. User name= 1, password= 2, NAS-IP Address= 4, NAS-Port= 5
D. User name= 1, password= 2, NAS-IP Address= 3, NAS-Port= 4
Answer: C
NEW QUESTION 504
In which scenario might it be helpful to adjust the network transition delay timer?
A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation
Answer: C
NEW QUESTION 505
Which statement about single-SSID environment is true?
A. It allows for the wired and wireless adapters to be provisioned in any order.
B. It provides access to the guest SSID after the device has completed provisioning with the provisioning SSID.
C. It uses the same SSID for certificate enrollment, provisioning, and secure network access.
D. It can use the Fast SSID Change feature to improve performance.
Answer: C
NEW QUESTION 506
……
P.S.
PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(508q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
And:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
NEW QUESTION 501
Which RADIUS service type can identify authentication attempts from devices that lack a supplicant?
A. Ethernet
B. Wireless-IEEE 802.11
C. Call Check
D. Framed
Answer: C
NEW QUESTION 502
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all TACACS+ communication.
B. It uses a single VIP on the network access device.
C. It uses a single TCP connection for all RADIUS communication.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: A
NEW QUESTION 503
What represents the default Cisco IOS RADIUS attribute-value pair?
A. User name= 5, password= 4, NAS-IP Address= 4, NAS-Port= 5
B. User name= 0, password= 1, NAS-IP Address= 2, NAS-Port= 3
C. User name= 1, password= 2, NAS-IP Address= 4, NAS-Port= 5
D. User name= 1, password= 2, NAS-IP Address= 3, NAS-Port= 4
Answer: C
NEW QUESTION 504
In which scenario might it be helpful to adjust the network transition delay timer?
A. when the client needs more time to log in to the network
B. when the client needs more time to perform compliance checks
C. when the client needs more time to obtain a DHCP lease
D. when the client needs more time to perform remediation
Answer: C
NEW QUESTION 505
Which statement about single-SSID environment is true?
A. It allows for the wired and wireless adapters to be provisioned in any order.
B. It provides access to the guest SSID after the device has completed provisioning with the provisionwsing SSID.
C. It uses the same SSID for certificate enrollment, provisioning, and secure network access.
D. It can use the Fast SSID Change feature to improve performance.
Answer: C
NEW QUESTION 502
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all TACACS+ communication.
B. It uses a single VIP on the network access device.
C. It uses a single TCP conasnection for all RADIUS communication.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: A
Hello!
The new PassLeader 300-208 dumps (Updated Recently — 27/Nov/2019) now are available, here are part of 300-208 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 511
Which matching model does the Cisco ISE use to process commands in a command set?
A. Wildcare matching model.
B. Case-sensitive matching model.
C. Regular expression matching model.
D. Literal matching model.
Answer: C
NEW QUESTION 512
Which RADIUS service type can identify authentication attempts from devices that lack a supplicant?
A. Framed
B. Wireless-IEEE802.11
C. Ethernet
D. Call Check
Answer: B
NEW QUESTION 513
Which two statements about TrustSec in Closed Mode are true? (Choose two.)
A. Only DNS and DHCP traffic are permitted until authentication is complete.
B. All user traffic is blocked until authentication is complete.
C. It requires EAP TLS.
D. The wired port is in the shutdown state.
E. Only EAFoL traffic is permitted until authentication is complete.
Answer: BE
NEW QUESTION 514
Which Cisco ISE feature can you configure to allow employees of your organization to add devices on which native supplicant provisioning is not supported to their user profiles?
A. Self-Registered Guest portal
B. Guest portal
C. BYOD portal
D. My devices portal
Answer: D
NEW QUESTION 515
Which RADIUS attribute can you use to filter MAB requests in an 802.1x deployment?
A. 1
B. 6
C. 31
D. 2
Answer: B
NEW QUESTION 516
In which scenario might it be helpful to adjust the network transition delay timer?
A. When the client needs more time to obtain a DHCP lease.
B. When the client more time to perform remediation.
C. When the client needs more time to perform compliance checks.
D. When the client needs more time to log in to the network.
Answer: B
NEW QUESTION 517
Which Catalyst Switch command is required to enable accounting for networking access?
A. aaa accounting dot1x default start-stop group radius
B. aaa accounting network default group radius
C. aaa accounting radius-server send accounting
D. aaa accounting command dot1x
Answer: A
NEW QUESTION 518
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all RADIUS connection.
B. It uses a single TCP connection for all TACACS+ communication.
C. It uses a single VIP on the network access device.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: B
NEW QUESTION 519
A client is quarantined during a Cisco ISE posture assessment. After which two events can the client undergo a posture reassessment? (Choose two.)
A. When the wired client disconnects and reconnects to the network.
B. When the supplicant is reconfigured.
C. When the client reinstall the posture agent.
D. When the reauthentication timer for the authorization profile is triggered.
E. When the network transition delay timer expires.
Answer: DE
NEW QUESTION 520
A security administrator must design posture remediation services for a company’s Macintosh user base running posture agent. Which Cisco ISE remediation option can the engineer utilize to accomplish this task?
A. Launch program remediation
B. AV remediation
C. File remediation
D. WSUS remediation
Answer: C
NEW QUESTION 521
Which statement about hot-spot guest access in a corporate environment that provides BYOD access for employees is true?
A. It uses TACACS+ to support user guest credential.
B. The BYOD portal must be configured on a separate SSID from the guest hotspot.
C. It uses WPA authentication, which allows it to provide connectivity to more device types.
D. Traffic to the employees BYOD portal must be directed to different WLC than guest traffic.
Answer: D
NEW QUESTION 522
Which command or command sequence can you enter to configure a DACL on the Cisco ISE?
A. ip access-list standard 99 permit ip any any
B. ip access-list extended 101 permit ip any any
C. access-list 101 permit ip any any
D. permit ip any any
Answer: B
NEW QUESTION 523
What was an early precursor to MAC Authentication Bypass?
A. Port security
B. VMPS
C. Spanning Tree
D. VLAN access lists
Answer: B
NEW QUESTION 524
A security engineer Is deploying Cisco ISE. Which feature must the engineer node settings to enable guest services?
A. Profiling services
B. Session services
C. Monitoring services
D. pxGrid services
Answer: D
NEW QUESTION 525
Which guest service requires session service to be enable on a Cisco ISE node?
A. Profile service
B. Posture service
C. Monitoring service
D. Administrator service
Answer: A
NEW QUESTION 526
……
P.S.
PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(531q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(454q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Passed today with 964/1000.
Dumps are valid to pass, but there are wrong answers.
D&D – NAT, NTP, Firewall modes and service policy
NAT Lab
Be careful with:
Which command enables uRPF on router’s interface?
and
Which command enables uRPF on ASA’s interface?
For Router the correct answer is:
ip verify unicast source reachable-via interface_name
For ASA:
ip verify reverse-path interface interface_name
Which two user privileges does ASDM allow an engineer to create? (Choose two.)
Correct answers are according to my research are:
read-only
admin
A network engineer wants to add a new view to an IOS device configured with RBAC. Which privilege is required for that task?
Correct should be root view
A customer has two ISPs for Internal traffic and a firewall with ont interface configured to each ISP…
Correct answer should be :
security zones
Which types of multicast packets are controlled by using storm control:
OSPF
RIPv2
Just passed 300-208 today with 895 , passing score is 846.
the PassLeader 502 + new 6 questions are valid for passing.
although some new questions came up, but you can pass if you have the knowledge.
Labs -> SIM & check config to answer.
D&D -> portals
Good luck to all
@VM can you share dumps?
@MGT could you please share the dump ?
Shouldn’t this be B? If there was an option for setting the ARP and CAM table to have the same timer value I believe that would be the answer but these options are just less than and greater than.
——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
anybody, please help with the correct answer?
Which type of Netflow information is displayed when the show ip flow export command is executed?
A. sent status and statistics
B. top talkers
C. export inykterface configurations
D. local status and statistics
Answer: D….
NEW QUESTION 523
What was an early precursor to MAC Authentication Bypass?
A. Port security
B. VMPS
C. Spanning Tree
D. VLAN access lists
Answer: B……..
@VM
Congrats. Can you share the dumps with correct answers?
300-206 Exam
Q129 Which three types of multicast packets are controlled by using storm control? (Choose three)
A. CDP
B. RTP
C. ICMP
D. BPDU
E. RIPv2
F. OSPF
Ans: D,E,F
I don’t know if this is correct.
Q161 Which two statements about deploying the cisco ASAv with VMware are true? (Choose
Two)
A. If the virtual appliance is running in transparent firewall mode, the VSphere swith
promiscuous mode security exception must be set to accept
B. The vCPU and memory allocation can be changed on the fly in accordance with
performance requirements
C. If can be deployed with either the vSphere standalone client or the OVF tool
D. The day 0 file is required for the ASAv and the vSphere swith
E. In a failover configuration, the primary and standby devices can use different model
licenses as long as both devices fully support the failover configuration
Answer: C D
I don’t know if this is correct………
“The day0.iso file (either your custom day0.iso or the default day0.iso) must be available during first boot.”
“If you do not have vCenter, see Deploy the ASAv Using the VMware vSphere Standalone Client and a Day 0 Configuration, or Deploy the ASAv Using the OVF Tool and Day 0 Configuration.”
https://www.cisco.com/c/en/us/td/docs/security/asa/asa910/asav/quick-start-book/asav-910-qsg/asav_vmware.html#id_45645
@VM
Congrats. Please can you share comments about exam
Anyone has recently passed the exam ??
Hello!
The new PassLeader 300-208 dumps (Updated Recently) now are available, here are part of 300-208 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 511
Which matching model does the Cisco ISE use to process commands in a command set?
A. Wildcare matching model.
B. Case-sensitive matching model.
C. Regular expression matching model.
D. Literal matching model.
Answer: C
NEW QUESTION 512
Which RADIUS service type can identify authentication attempts from devices that lack a supplicant?
A. Framed
B. Wireless-IEEE802.11
C. Ethernet
D. Call Check
Answer: B
NEW QUESTION 513
Which two statements about TrustSec in Closed Mode are true? (Choose two.)
A. Only DNS and DHCP traffic are permitted until authentication is complete.
B. All user traffic is blocked until authentication is complete.
C. It requires EAP TLS.
D. The wired port is in the shutdown state.
E. Only EAFoL traffic is permitted until authentication is complete.
Answer: BE
NEW QUESTION 514
Which Cisco ISE feature can you configure to allow employees of your organization to add devices on which native supplicant provisioning is not supported to their user profiles?
A. Self-Registered Guest portal
B. Guest portal
C. BYOD portal
D. My devices portal
Answer: D
NEW QUESTION 515
Which RADIUS attribute can you use to filter MAB requests in an 802.1x deployment?
A. 1
B. 6
C. 31
D. 2
Answer: B
NEW QUESTION 516
In which scenario might it be helpful to adjust the network transition delay timer?
A. When the client needs more time to obtain a DHCP lease.
B. When the client more time to perform remediation.
C. When the client needs more time to perform compliance checks.
D. When the client needs more time to log in to the network.
Answer: B
NEW QUESTION 517
Which Catalyst Switch command is required to enable accounting for networking access?
A. aaa accounting dot1x default start-stop group radius
B. aaa accounting network default group radius
C. aaa accounting radius-server send accounting
D. aaa accounting command dot1x
Answer: A
NEW QUESTION 518
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all RADIUS connection.
B. It uses a single TCP connection for all TACACS+ communication.
C. It uses a single VIP on the network access device.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: B
NEW QUESTION 519
A client is quarantined during a Cisco ISE posture assessment. After which two events can the client undergo a posture reassessment? (Choose two.)
A. When the wired client disconnects and reconnects to the network.
B. When the supplicant is reconfigured.
C. When the client reinstall the posture agent.
D. When the reauthentication timer for the authorization profile is triggered.
E. When the network transition delay timer expires.
Answer: DE
NEW QUESTION 520
A security administrator must design posture remediation services for a company’s Macintosh user base running posture agent. Which Cisco ISE remediation option can the engineer utilize to accomplish this task?
A. Launch program remediation
B. AV remediation
C. File remediation
D. WSUS remediation
Answer: C
NEW QUESTION 521
Which statement about hot-spot guest access in a corporate environment that provides BYOD access for employees is true?
A. It uses TACACS+ to support user guest credential.
B. The BYOD portal must be configured on a separate SSID from the guest hotspot.
C. It uses WPA authentication, which allows it to provide connectivity to more device types.
D. Traffic to the employees BYOD portal must be directed to different WLC than guest traffic.
Answer: D
NEW QUESTION 522
Which command or command sequence can you enter to configure a DACL on the Cisco ISE?
A. ip access-list standard 99 permit ip any any
B. ip access-list extended 101 permit ip any any
C. access-list 101 permit ip any any
D. permit ip any any
Answer: B
NEW QUESTION 523
What was an early precursor to MAC Authentication Bypass?
A. Port security
B. VMPS
C. Spanning Tree
D. VLAN access lists
Answer: B
NEW QUESTION 524
A security engineer Is deploying Cisco ISE. Which feature must the engineer node settings to enable guest services?
A. Profiling services
B. Session services
C. Monitoring services
D. pxGrid services
Answer: D
NEW QUESTION 525
Which guest service requires session service to be enable on a Cisco ISE node?
A. Profile service
B. Posture service
C. Monitoring service
D. Administrator service
Answer: A
NEW QUESTION 526
……
P.S.
PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(531q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(483q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(457q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
hi @Cisco Guy
@vm pass November 28th
hi, I’ll take the 300-206 on saturday, someone has any news about the simlabs
hi guys please confirm answer
####################################
Lab: NAT
1 Lab
You are a network security engineer for the Secure-X network. You have been tasked with implementing dynamic network object NAT with PAT on a Cisco ASA. You must configure the Cisco ASA such that the source IP addresses of all internal hosts are translated to a single IP address (using different ports) when the internal hosts access the Internet. To successfully complete this activity, you must perform the following tasks:
– Use the Cisco ASDM GUI on the Admin PC to configure dynamic network object NAT with PAT using the following parameters: – Network object name: Internal-Networks – IP subnet: 10.10.0.0/16 – Translated IP address: 192.0.2.100 – Source interface: inside – Destination interface: outside
####################################
HotSpot: Syslog
####################################
D&D: QoS policy order
D&D: Routed Mode x Transparent Mode
D&D: NAT (destination address and source address of packet)
D&D: NTP configuration order
D&D: ASA_DataPlane, ASP-Drop, Eth-Type
####################################
Which configuration on a switch would be unsuccessful in preventing a DHCP. (this question was reversed: Which would you configure on a switch to prevent a DHCP starvation attack? (Choose two))
starvation attack?
* Port Security
* DHCP snooping
####################################
Prime Infrastructure admin discovers the network and wants to use Web Services Management Agent for configuring devices. Which protocol allows use of WSMA?
* SSHv2
####################################
A hacker is intercepting CDP packets in the network. Which info he can get from captured CDP packets?
* VTP Domain – Hardware Platform
####################################
Where are database files for BTF stored on the ASA?
* running memory
####################################
SSHv2 is not explicitly allowed on router by command “ip ssh version 2”. Which statement is true
* both SSHv1 and SSHv2 are allowed
####################################
You are network engineer at some company. There are issues with Internet access. Which capture ACL must be used to capture only return web traffic?
*
####################################
With what commands you can configure unified access-list on ASA CLI?
* access-list
* object-group network
####################################
What feature must be enabled on Cisco ASA to inspect encrypted voice signalisation traffic between IP Phones and UCM?
* TLS proxy
####################################
Which two user privileges does ASDM allow engineer to create?
* read-only
* admin
####################################
A network engineer wants to add new view to an IOS device configured with RBAC. Which privilege is required for that task?
* root view
####################################
An engineer is hardening the management plane for an ASA. Which protocol is affected by this hardening?
* ICMP
####################################
Which setting is optional when configuring two Cisco ASA firewalls for failover?
* The two units in a failover configuration do not need to have identical licenses
####################################
A customer has two ISPs for Internal traffic and a firewall with one interface configured to each ISP. An engineer discovers there is asymmetric routing when using the internal traffic leaving is using ISP 1 and returning traffic is using ISP 2. Which feature fixes this connectivity
* security zones
####################################
Which three configurations tasks do you perform to allow Net Flow on a Cisco ASA G500 Series firewall? (Choose three)
* Apply the newly created class map to the global policy.
* Create a class map match interesting traffic.
* Define a NetFlow collector by using the flow-export command
####################################
How many servers Prime Infrastructure High Availability supports?
* 2. An HA deployment consists of two Prime Infrastructure servers: a primary and a secondary
####################################
Which two keying mechanisms are available within MACsec? (Choose two)
* Security Association Protocol (SAP) and MAC Security Key Agreement (MKA)
####################################
You fail to communicate with a target device by using the Cisco Security Manager console. Which two tasks do you perform to allow communication? (Choose two)
* Enable SNMPv2 on the target device
* Enable SSL/HTTPS on the target device
####################################
Which statement about Cisco ASA NetFlow v9 (NSEL) is true?
* NSEL tracks flow-create, flow-teardown, and flow-denied events and generates appropriate NSEL data records
* You must define a flow-export event type under a policy
####################################
Refer to the exhibit. You configure DHCP snooping in VLAN 10. Which two configuration commands do you implement on the switch to enable Dynamic ARP inspection in VLAN 10
* ip arp inspection vlan 10
* ip arp inpection trust (Port Server)
####################################
Which two capabilities of Cisco Security Manager are true? (Choose two)
* it reports the events of an FWSM device
* it rolls back a configuration to a previous configuration
####################################
WHICH TWO PRODUCTS CAN BE MANAGED BY CISCO SECURITY MANAGER?
* Cisco IOS routers
* Cisco IPS 4200 and 4500 Series sensors
####################################
A network engineer applies the configuration shown to set up a capture on a Cisco Adaptive Security Appliance. When attempting to start a capture, this error message is observed: ERROR: Capture doesn’t support access-list containing mixed policies, For which two reasons does this error message occur? (Choose two.)
* IPv6 is enabled on the Cisco ASA
* IPv6 is not specified on the access list with “any” keyword
####################################
You are using Cisco Security Manager to manage your infrastructure. What protocol is used by the Cisco Security Manager client to connect to the ASA?
* HTTPS
####################################
You are network engineer at some company. There are issues with Internet access. Which capture ACL must be used in order to capture only return web traffic?
* permit tcp any eq 80 10.10.1.0 255.255.255.0” (network IP I choosed just for example)
####################################
When creating a cluster of Cisco ASA firewalls, which feature is configured on the cluster, instead of being applied to each Cisco ASA unit?
* URL filtering
####################################
Adding Cisco Prime using discovery which protocol must be used when RTDM is processed?
* ARP
####################################
You fail to communicate with a target device by using the Cisco Security Manager console. Which two tasks do you perform to allow communication? (Choose two)
* Enable SNMPv2 on the target device
* Enable SSL/HTTPS on the target device
####################################
Which command captures http traffic from Host A to Server A?
* capture traffic match tcp host 10.1.1.150 host 10.2.2.100
####################################
A user is having trouble connecting to websites on the Internet. The network engineer proposes
configuring a packet capture that captures only the HTTP response traffic on the Cisco Adaptive
Security Appliance between the user’s workstation and Internet. If the user’s workstation IP
address is 10.0.0.101, which ACE is needed to achieve this capture?
* Access-list capture permit TCP any host 10.0.0.101 eq 80
####################################
Which command enables uRPF on ASA interface?
* ip verify reverse-path interface interface_name
####################################
Which feature do you enable to restrict the interface on which mgmt traffic can be received by the routes on your network?
* The Management Plane Protection (MPP)
####################################
Which two capabilities of CSM are true?
* it reports the events of an FWSM device
* it rolls back a configuration to a previous configuration
####################################
Which two must you configure to send logging events to ASDM and a syslog server
* Logging host
* Logging ASDM
####################################
Which two options are limitations of using Cisco ASDM as compared to Cisco Security Manager?
* Limited remote management
* API- based access
####################################
An engineer is configuring lOS rote based CLI access and is getting an error upon entering the command* exec include show ip bgp summary parser view command. Based on the console message received, which command would fix this error?
* Secret 5
####################################
A user is having trouble connecting to websites on the Internet. The network engineer proposes configuring a packet capture that captures only the HTTP response traffic on the Cisco Adaptive
Security Appliance between the user’s workstation and Internet. If the user’s workstation IP address is 10.0.0.101, which ACE is needed to achieve this capture?
* Access-list capture permit TCP any host 10.0.0.101 eq 80
####################################
Which three types of multicast packets are controlled by using storm control? (Choose three )
* RIPv2
* OSPF
* BPDU
####################################
Which two control-plane subinterfaces can be found in IOS based routers that supports CPPr ?
* host, transit, CEF-exception
####################################
Which two statements about Cisco Prime Security Manager are true?
* It can use AAA to identify users and handle RBAC
* You can import existing object definitions as the basis of new policy rules
####################################
Which two configurations are the minimum needed to enable EIGRP on the Cisco ASA appliance? (Choose two.)
* Enable the EIGRP routing process and specify the AS number
* Use the network command(s) to enable EIGRP on the Cisco ASA interface(s)
####################################
Which command displays syslog messages on the Cisco ASA console as they occur?
* loggin console
Hallo Together,
I am looking for stable dumps for 300-210 and 300-208.
if someone need for 209 I can share it.
Thanks in advance!
hi @passed
hi @passed
you passed test 300 206 please share your comments and experienced
@Passed I can share a trust dump for 300-208.
Please, share your experience on 300-206.
hi @MABB you can check my post and validate the answers
thanks
NEW QUESTION 518
How does the use of single connect mode for device authentication improve performance?
A. It uses a single TCP connection for all RADIUS connection.
B. It uses a single TCP codwnnection for all TACACS+ communication.
C. It uses a single VIP on the netwdwork access device.
D. It multiplexes RADIUS requests to the server over a single session.
Answer: B
@sma I don’t agree with this answer:
Which two options are limitations of using Cisco ASDM as compared to Cisco Security Manager?
* Limited remote management
* API- based access
In my opinion the correct answer is:
* API- based access
* limited visibility of networks
With CSM we can contruct network topologies and gain visibility of networks. In ASDM not…
https://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/418/user/guide/CSMUserGuide/tpchap.html
@sma other possible incorrect question
You fail to communicate with a target device by using the Cisco security manager console.
Which tow task do you perform to allow communication? (Choose Two)
CORRECT:
C. Enable SSL/HTTPS on the target device
E. Verify that the device properties correctly configured
SNMPV2 is not mentioned to configure on Cisco Security Manager. You should configure the target device to work:
“Before you start to manage a device using Security Manager, you should prepare the device with at least a minimal configuration.”
https://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/417/user/guide/CSMUserGuide/ivprep.html
hi @MABB thanks
i agree
C. Enable SSL/HTTPS on the target device
E. Verify that the device properties correctly configured
please check this to
* Limited remote management
* API- based access
https: // community.cisco.com/t5/security-management/csm-asdm-fwsm-versions/td-p/1373965
https: // http://www.thesecurityblogger.com/comparing-asa-management-internal-vs-external-cisco-prime-security-manager-overview/
friends,
I have a summary of the exam 300-206, 300-208, 300-209 and 300-210.
You only need these files to pass 100% confirmed.
Many know me, if you are interested please write to the following email.
ccnpswicth@ gmail. com
You have configured multiples feature actions in a single service policy with the cisco ASDM drag and drop the feature actions from the left into the order in which they are applied on the right.
Application Inspect Step 1
ASA firePower Actions Step 2
QoS input policing Step 3
Qos output policing Step 4
TCP Normalization Step 5
Answer
QoS input policing Step 1
TCP Normalization Step 2
Application Inspect Step 3
ASA firePower Actions Step 4
Qos output policing Step 5
Hi, i am here for sharing,
There 2-3 new questions but it easy so not remain in my mind, sorry.
All others in the PassLeader 483 questions and yes there are a lot, may be 1/5 was wrong answers.
Take your time and verify them.
60 questions, 1 Lab Sim: Object NAT, 1 Hopot questions: Syslog, DND: QoS input-TCP Normalization-…, NTP authentication: Enable NTP authen – Config trust key – Set authen key – config IP add and key ID, NAT and IP Address DND (anwsered wrong in dump).
Learn carefully to get knowledge, verify the dump and you will pass.
Thank all of you.
thanks @pgun for sharing you comments and experienced with the exam.
Hello!
The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 501
……
P.S.
PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(501q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(523q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(462q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
@passed , share your email . i do have 300-210.
friends,
I have a summary of the exam 300-206, 300-208, 300-209 and 300-210.
You only need these files to pass 100% confirmed.
Many know me, if you are interested please write to the following email.
ccnpswicth@ gmail. com/
@sma hello.
What do you think about this question?
——
Refer to the exhibit. Which option describes the role of the filter rule on this Cisco ASA firewall?
A. To discard http traffic destined to a proxy server
B. To define allowed traffic when the URL filtering server is unavailable
C. To perform deep packet inspection on all traffic crossing the Cisco ASA
D. To send http traffic to a defined URL filtering server
Answer: D
Refer to the exhibit. A network engineer applies the configuration shown to set up a capture on a
Cisco adaptive security appliance. When attempting to start a capture this error message is
observed:
ERROR: capture doesn´t support access-list containing mixed policies
For which two reasons does this error message occur? (choose two)
A. Access list type is incorrect
B. IPv6 is enabled on the cisco ASA
C. A name ACL is required
D. IPV4 is not specified on the access list with ¨Any4¨ keyword
E. The ACL number is correct
Answer: A,D (in my opinion)
@sma
Referring for your answer:
===
* Limited remote management
* API- based access
===
Another question about the CSM have the “visibility” keyword as answer…
I guess that the question “Two option are limitations of using Cisco ASDM as compared to Cisco security
manager” is referring only for management of ASA appliances…
It’s seems that two questions were made together, see:
Q142 Which two statements about the cisco security control framework model are true?
(Choose two)
A. It supports IDS and IPS as components of the control objective
B. It supports multiples security actions to provide visibility and control
C. It uses VLANs to harden the network
D. It relies on a redundant architecture for the core enterprise infrastructure
E. It focuses on device hardening and network resiliency to enhance service availability
Answer: A, B
————–
Which two options are limitations of using Cisco ASDM as compared to Cisco Security Manager?
* Limited remote management
* API- based access
In my opinion the correct answer is:
* API- based access
* limited visibility of networks
@sma disconsider my last comment.
I have confused the cisco security control framework model and CSM…
I Agree with you:
* Limited remote management
* API- based access
And the correct answer for:
Q142 Which two statements about the cisco security control framework model are true?
(Choose two)
A. It supports IDS and IPS as components of the control objective
B. It supports multiples security actions to provide visibility and control
C. It uses VLANs to harden the network
D. It relies on a redundant architecture for the core enterprise infrastructure
E. It focuses on device hardening and network resiliency to enhance service availability
Answer: B, E
hi @MABB no problem,
i agree B,E to question of framework model
@MABB
i agree to question ERROR: capture doesn´t support access-list containing mixed policies
For which two reasons does this error message occur? (choose two)
A. Access list type is incorrect
D. IPV4 is not specified on the access list with ¨Any4¨ keyword
hi @MABB
I select.
B. To define allowed traffic when the URL filtering server is unavailable
Section Configuring Filtering Services
Check the Allow outbound traffic if URL server is not available check box to connect without URL filtering being performed. When this check box is unchecked, you cannot connect to Internet websites if the URL server is unavailable.
https: //www.cisco.com/c/en/us/td/docs/security/asa/asa91/asdm71/firewall/asdm_71_firewall_config/protect_filter.html
@MABB @sma @netguy
Do you have the latest and valid dump questions for 300-208?
Kindly could you please share with me? Thanks!
Hi @sma.
But the role of the filter rule is send http traffic to a defined URL filtering server, right?
“allow traffic when the URL filtering server is unavailable” is not just an option?
Q144 Which two best practice can mitigate layer 2 attack on the network? (choose two)
A. Disabling DTP on all user access ports to mitigate VLAN hopping
B. Configuring IP source guard to mitigate CAM and DHCP starvation attack
C. Configuring port security on the trunk port to mitigate CAM and DHCP starvation stacks
D. Configuring dynamic ARP inspection to mitigate ARP attacks
E. Disabling STP on all layer 2 network switches to mitigate ARP attacks
Answer: AB
It’s correct?
CCNA Security 210-260 Official Cert Guide
Layer 2 Best Practices
Let’s begin with best practices for securing your switches and then discuss in more detail
which best practice mitigates which type of attack.
Best practices for securing your infrastructure, including Layer 2, include the following:
■ Select an unused VLAN (other than VLAN 1) and use that for the native VLAN for all
your trunks. Do not use this native VLAN for any of your enabled access ports.
■ Avoid using VLAN 1 anywhere, because it is a default.
■ Administratively configure access ports as access ports so that users cannot negotiate a
trunk and disable the negotiation of trunking (no Dynamic Trunking Protocol [DTP]).
■ Limit the number of MAC addresses learned on a given port with the port security
feature.
■ Control spanning tree to stop users or unknown devices from manipulating spanning tree.
You can do so by using the BPDU Guard and Root Guard features.
■ Turn off Cisco Discovery Protocol (CDP) on ports facing untrusted or unknown networks that do not require CDP for anything positive. (CDP operates at Layer 2 and may
provide attackers information we would rather not disclose.)
——
Table 9-2 Toolkit for Layer 2 Security
1. Port security Limits the number of MAC addresses to be learned on an access switch port, as covered later in this chapter.
2. BPDU Guard If BPDUs show up where they should not, the switch protects itself, as covered in this chapter.
3. Root Guard Controls which ports are not allowed to become root ports to remote root switches, as covered in this chapter.
4. Dynamic ARP inspection Prevents spoofing of Layer 2 information by hosts.
5. IP Source Guard Prevents spoofing of Layer 3 information by hosts.
6. 802.1X Authenticates users before allowing their data frames into the network.
7. DHCP snooping Prevents rogue DHCP servers from impacting the network.
8. Storm control Limits the amount of broadcast or multicast traffic flowing through the switch.
9. Access control lists Traffic control to enforce policy. Access control is covered in another chapter.
=========
Q144 Which two best practice can mitigate layer 2 attack on the network? (choose two)
A. Disabling DTP on all user access ports to mitigate VLAN hopping **
D. Configuring dynamic ARP inspection to mitigate ARP attacks **
hi @MABB i not sure, but i agree with you (A-D)
hi @LJ 300 208 or 300 206 ?¡
you have info so that shared with us
@Lj i need info 300 206 my exan is in january
hi @MABB
But the role of the filter rule is send http traffic to a defined URL filtering server, right?. YES
i not sure, but please check, The allow option, at the end of the filter URL statement, indicates that users should be allowed external HTTP access in the event the security appliance cannot communicate with Websense. If omitted and the Websense server is unavailable, users lose all HTTP access to the Internet.
I don’t have any info about 300-206, I didnt give that exam yet.
Kindly could you please send for 300-208 please, your help would be highly appreciated. Thanks.
@LJ
you have a email ?
Yes, please send it on {email not allowed}.
Thank you so much
Yes, please send it on laeba_goodfriend @ hotmail. com
Thank you so much( just remove the spaces)
@LJ info send.
I hope you find it helpful and give it proper use.
friends,
I have a summary of the exam 210-260, 300-206, 300-208, 300-209 and 300-210.
You only need these files to pass 100% confirmed.
Many know me, if you are interested please write to the following email.
ccnpswicth@ gmail. com//
Thanks @sma, Got it. Your help is very much appreciated.
Guys I pass my exam today wtih 923 score
I recomend to read this webpage from page 42, dumps are not enough to pass, some cuestions are wrong.
There are aproximatly 5 new questions
For the question : Which two voice and video protocols does the Cisco ASA 5500 Series support with Cisco Unified Communications Application Ispection? (Chose two)
The options are diferent from the dump, I recommend chequing this:
https://www.cisco.com/c/en/us/products/collateral/security/asa-5500-series-next-generation-firewalls/product_data_sheet0900aecd8073cbbf.html
The drag and drops are the same, also the SIM is the same
Thanks to everyone that help
network engineer applies the configuration shown to set up a capture on a Cisco Adaptive Security Appliance. When attempting to start a capture, this error message is observed:
ERROR: Capture doesn’t support access-list containing mixed policies
For which two reasons does this error message occur? (Choose two.)
A. The ACL number is incorrect.
B. Access list type is incorrect.
C. IPv6 is enabled on the Cisco ASA.
D. A named ACL is required.
E. IPv6 is not specified on the access list with “any” keyword.
HIDE ANSWERSCorrect Answer Wrong: DE
Correct Ans: C-E
https: //vceguide.com/which-two-reasons-does-this-error-message-occur/
Passed today!
About 6 ~ 7 new questions or with different options.
I used the Spoto dump 168q and PL 483q (both have few wrong answers)
I will share spoto dump with the answers corrected by me (trust all the answers).
Congrats dude!. your help is very much appreciated, please you can more details the about new questions.
Regards.
Spoto 300-206 168q corrected by me.
http://s000.tinyupload.com/index.php?file_id=96189297463476186137
I can remember just two questions.
One of this was that has been mentioned by RPG
Which two voice and video protocols does the Cisco ASA 5500 Series support with Cisco Unified Communications Application Ispection? (Chose two)
A) RSH
B) MGCP
C) TELNET
D) RTSP
E) Other irrelevant
Answer: B, D
———-
A question saying that one network administrator has enabled access through HTTPS to a ROUTER and asking what things the network admin have be done. I remember just two relevant answers:
A) Enabled TLS on router
B) Generate a RSA key
C) Irrelevant
D) Irrelevant
Answer: A, B
———-
My advice: study and trust in the dump posted by me and correct the PL dump from spoto dump.
You will pass with high score. This is my contribution.
@sma
The correct answer is B, E, trust me.
network engineer applies the configuration shown to set up a capture on a Cisco Adaptive Security Appliance. When attempting to start a capture, this error message is observed:
ERROR: Capture doesn’t support access-list containing mixed policies
For which two reasons does this error message occur? (Choose two.)
A. The ACL number is incorrect.
B. Access list type is incorrect.
C. IPv6 is enabled on the Cisco ASA.
D. A named ACL is required.
E. IPv6 is not specified on the access list with “any” keyword.
B. Access list type is incorrect. **
E. IPV4 is not specified on the access list with ¨Any4¨ keyword **
I had this question.
Thanks @MABB, Got it. I will check your notes and recommendations. Your help is very much appreciated
@sma … I have questions for 300-206 .. the ones i got in exam.. you need to verify the answers though .. i passed on edge,… give me your email i will forward …
hi @SP please send it on sma.crossover @ gmail.com
Thank you so much( just remove the spaces)
hi @MABB here the support to the answer
Thanks!
Cisco ASA – ERROR: Capture doesn’t support access-list containing mixed policies
https: // http://www.fir3net.com/Firewalls/Cisco/cisco-asa-error-capture-doesnt-support-access-list-containing-mixed-policies.html
Which two voice and video protocols does the Cisco ASA 5500 Series support with Cisco Unified Communications Application Ispection? (Chose two)
A) RSH
B) MGCP
C) TELNET
D) RTSP
E) Other irrelevant
Answer: B, D
———-
A question saying that one network administrator has enabled access through HTTPS to a ROUTER and asking what things the network admin have be done. I remember just two relevant answers:
A) Enabled TLS on router
B) Genersfdvwate a RSA key
C) Irrelevant
D) Irrelevant
Answer: A, B
Table 9-2 Toolkit for Layer 2 Security
1. Port security Limits the number of MAC addresses to be learned on an access switch port, as covered later in this chapter.
2. BPDU Guard If BPDUs show up where they should not, the switch protects itself, as covered in this chapter.
3. Root Guard Controls which ports are not allowed to become root ports to remote root switches, as covered in this chapter.
4. Dynamic ARP inspection Prevents spoofing of Layer 2 information by hosts.
5. IP Source Guard Prevents spoofing of Layer 3 information by hosts.
6. 802.1X Authenticates users before allowing their data frames into the network.
7. DHCP snooping Prevents redaogue DHCP servers from impacting the network.
8. Storm control Limits the amount of broadcast or multicast traffic flowing through the switch.
@sma sent…
Thanks @sp, Got it. Your help is very much appreciated.
Regards.
Hi Guys.
Passed yesterday with 9XX
60 Questions
LAB –> NAT
SIM –> SYSLOG
DD –> NAT
NTP
ASA (QOS)
ROUTED/TRANSPARENT
Thanks to the all great effort to the people here.
Also, I’d like to mention that I did use the dump file from (@CCNP Switch) and it’s really super good… thanks man
300-210 done
300-206 done
next will be either 208 or 209 ….
Hi,
I need a stablew 300-208 questions I have 100 % stable questions for 300-209 and 300-210
about 210 exam I have short version of questions which is very Stable a passed 9xx on 19.12
if someone can help and I can help someone feel free to write me. I share the files for free.
nikolai112***@abv.bg
Thank you very much Guys that you have shared your experience here it is very helpful
Thank you in advance!
congratulations Netguy.
Hello!
The new PassLeader 300-206 dumps (Updated Recently) now are available, here are part of 300-206 exam questions (FYI):
[Get the download link at the end of this post]
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Management Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 501
……
P.S.
PassLeader 300-206 dumps FYI:
od.lk/fl/NjFfMTUyNjc0M18
(501q~~~NEW VERSION DUMPS!!!)
Good Luck!!!
[(copy that link and open it in your web browser!!!)]
What’s more:
1. PassLeader 300-208 dumps FYI:
od.lk/fl/NjFfMTUyNjc0NV8
(523q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
2. PassLeader 300-209 dumps FYI:
od.lk/fl/NjFfMTUyNjc0N18
(462q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
3. PassLeader 300-210 dumps FYI:
od.lk/fl/NjFfMTUyNjc0OV8
(508q~~~NEW VERSION DUMPS!!!)
~~~~~~~~~~~~~~~~~~~~~~~~~
Good Luck!!!
[(copy those links and open them in your web browser!!!)]
Thanks @sma
NEW QUESTION 490
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
A. username authentication with MD5 or SHA encryption
B. MD5 or SHA authentication with DES encryption
C. username authentication with DES encryption
D. DES authentication with MD5 or SHA encryption
Answer: B
NEW QUESTION 491
An engineer wants to ensure that a multicontext Cisco ASA determines the proper context to send a packet. Which two classification criteria must be unique for each context for this determination to occur? (Choose two.)
A. ARP table
B. transparent forwarding
C. session state
D. interfaces
E. MAC addresses
Answer: DE
NEW QUESTION 492
Which two device types can you examine with a TrustSec Readiness Assessment report? (Choose two.)
A. SGACL devices
B. TrustSec incapable devices
C. enforcement devices
D. authentication devices
E. security group tagging devices
Answer: BC
NEW QUESTION 493
An engineer has found that threat detection has been turned on by default on a Cisco ASA. Which two security events are monitored? (Choose two.)
A. number of times the rates were exceeded
B. total number of malformed packets received
C. denial of service attack occurrences
D. packets allowed by the inspection engine
E. concurrent NAT interface overload addresses
Answer: AC
NEW QUESTION 494
Which two values must you provide when you use a CSV file to import devices into Cisco Prime Infrastructure? (Choose two.)
A. device model number
B. SNMP version
C. device serial number
D. device IP address
E. EtherType field
Answer: BD
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage the larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE
NEW QUESTION 496
Which two unified communications protocols can be inspected for an anomaly by using the Cisco ASA 5500 Series firewall? (Choose two.)
A. RSH
B. SCP
C. MGCP
D. TFTP
E. RTSP
Answer: CE
NEW QUESTION 497
Which purpose of MKA in a MACsec deployment is true?
A. It encrypts traffic between switches.
B. It transports EAP messages from access switches to the RADIUS server.
C. It provides additional security features beyond the default SAP key exchange.
D. It encrypts traffic between the downlink port and the endpoint of the switch.
Answer: D
NEW QUESTION 498
Due to a traffic storm on your network, two interfaces were error-disabled and both interfaces sent SNMP traps. In which two ways can the interfaces be back into service? (Choose two.)
A. If the snmp-server enable traps command is enabled, the ports return to service automatically after 300 seconds.
B. If EEM is configured, the ports return to service automatically in less than 300 seconds.
C. If the administrator enters the shutdown and no shutdown commands on the interfaces.
D. If the interfaces are configured with the error-disable detection and recovery feature, the interfaces will be returned to service automatically.
E. If Cisco Prime is configured, it issues an SNMP set command to re-enable the ports after the preconfigured interval.
Answer: CD
NEW QUESTION 499
You need to increase the level of security for the management traffic accessing a Cisco router. You plan to enable HTTPS. Which action do you take on the router?
A. Disable TCP port 23.
B. Generate an RSA key.
C. Enable SCP.
D. Enable TLS.
Answer: D
NEW QUESTION 500
Which action do you take on a Cisco router to limit the management traffic to only one interface?
A. Filter incoming connections by applying an extended ACL on a loopback interface.
B. Filter incoming connections by applying a standard ACL on a SVI.
C. Utilize the Managementwr Plan Protection feature.
D. Add an interface by using the management-interface command.
Answer: C
NEW QUESTION 495
Which two features does DNSSEC leverage for proper functionality? (Choose two.)
A. It uses TCP to ensure reliable delivery.
B. It uses UDP to reduce the DNS responses time.
C. It uses EDNS to manage thewef larger DNS packets it requires.
D. It uses UDP to minimize packet size.
E. It uses AD and DO inside UDP to reduce response time.
Answer: CE